#01 Lamborghini Countach LP400 | Aoshima | 1/24 | Scale Model Building | ASMR |

[@PhillysHobbyHouse]

Your a real inspiration to us modellers, I try and make my videos using your techniques and honestly I have along way to go before I’m able to make models and videos like yours keep up the fantastic work, bravo👏

[@OMGscaleworks]

I want everyone to see that it is not as difficult as they think. They can follow me step by step and have fun building models with me. This is the intention of my KZbin channel.

[@jasontomlinson9619]

That green is just 👌👌👌👌👌

[@OMGscaleworks]

Glad you like it!

[@janvanrenselaar5998]

Those thin A-pilars,brrr don,t even like to get close to them. Great color and paintwork.Excelent as always. You are getting famous for you quality of paintworks on the kits.

[@OMGscaleworks]

I'm not good at customizing kits. So I had to pay attention to making the body paint and assembly as good and perfect as I could. 😉

[@janvanrenselaar5998]

@@OMGscaleworks well you sure did a good job. With my thickfingers those pilars were gone after 5 seconds of sanding. Looking very forward to the complete car. Was a futuristic car when i was young and saw it on the Zandvoort race track in pure white. Ach those memories from when i was young😂😂😂😂.

[@tracybales7036]

AWESOME paint job by the way!!!

[@OMGscaleworks]

Thanks so much mate! ☺️

[@sert]

Can't wait for the next chapter

[@OMGscaleworks]

Thanks bro! You’ll see ASAP.

[@markc7002]

Stunning paint-job, a shine of serious note!!

[@OMGscaleworks]

Paint job is my favorite part. Love to see it smooth and shine.

[@garyslentzii2796]

My favorite color. Gorgeous! Nice job bro!

[@OMGscaleworks]

Thanks you very much bro! Glad you like it.

[@lehagusev583]

Цвет очень хорош! Великолепно!!!

[@OMGscaleworks]

Thanks very much buddy! 😊

[@gunrunner35]

Nicely done!

[@OMGscaleworks]

😍😍😍

[@KarlScaleModeling]

Nice project you got going there my friend 👍🏼 Lovely colour choice. Looking forward for part 2 ☺️

[@OMGscaleworks]

Thank you so much my friend Karl! 😊

[@madhatterstudios966]

mate - its great to see another spectacular build coming from your bench! I really do enjoy your videos. As to the subject itself, I like the Countach but not what I consider the "plain" version. The wheels look awful and resemble Police Car steel wheels and without the huge rear wing and side flares etc, it looks a bit pedestrian (IMO). Still, you are making it look better than usual, thanks to your very talented paint work. Looking forward to Part 2

[@OMGscaleworks]

Thanks a lot! Glad you like my work.

[@muhammadizzuan4752]

the most scariest thing to do : scribing 😆

[@OMGscaleworks]

I used to be afraid of this step too, but once I learned how to do wound care, I'm not afraid of it anymore. 😛

[@kotetsu6126]

รอชม part 2 ครับ

[@OMGscaleworks]

😃😃😃

[@anthonyw5261]

Fantastic video. Great color choice. Watching a build from scratch is relaxing and entertaining. Thank you!!! Looking forward to part 2 😀

[@OMGscaleworks]

Glad you like! Part 2 will be ready next weekend, Thanks for your following. 😊

[@LOSTVeteR1]

Beautiful build. And sounds around are awesome!

[@OMGscaleworks]

TNX! Glad you like it. 😊

[@surapongsuwanlee6751]

สวยมากครับ

[@OMGscaleworks]

ขอบคุณมากครับผม 🥰

[@Azathoth2980]

Green is a very rare color, lambo usually comes in yellow 😮

[@OMGscaleworks]

This build concept is Italian guy in British look 😄

[@davidson4301]

Hi , great build as usual - top work . Can I ask a question- when you use glasurit clear coat , do you mix with a hardener is is there no need ? I’m struggling to find it in the uk in small quantities and not sure what type to buy ? Thanks

[@OMGscaleworks]

I've used Glasurit on several previous builds. And I have encountered the same hardener erection problems as you. This is because we cannot purchase this in small quantities. So now I've switched to Manga Pro Mix's 2K clear coat to solve this problem. Thank you very much for your watching and your comments

[@usamaru.]

cool！😊

[@OMGscaleworks]

Thanks a lot! 😃

[@Raigoth]

I tried looking up this paint, but the website was in...Thai? I dont even know the language I apologize. Is there a link to an English version of the site? I could not for the life of me figure out how to switch the languages. (Also thank you for showing the mask. Dont know if that was in response to a previous comment I made, but it made me smile regardless.)

[@OMGscaleworks]

Can you give me your email? I'll let the S.N.P Color staff help you. Thank you very much for your comment. 🥰

[@numfonsawettkul5188]

🎉🎉🎉🎉🎉🎉

[@OMGscaleworks]

Love U 3000!

[@gavinmackenzie717]

Looks like it’s set to be another amazing build. Can I ask what cement you use on painted parts because I keep melting the plastic 😮thanks

[@OMGscaleworks]

You can use non fogging CA glue ina little amount. Or using “Tamiya Craft Bond”. Thanks a lot for visiting my channel mate.

[@alifkhanfatihkara]

Could you tell me what paint colors that I should have? I mean like "I should have all primer colors such as black, white, red, green & blue, because I can combine each other to get new other colors"?

[@OMGscaleworks]

For basic use I recommend having white, grey and black primer. You will use these all the time. And you can mix them to get a shade of gray that suits the main color.

[@alifkhanfatihkara]

@@OMGscaleworks And then what basic main colors that I should have? or it's depending my needs, so when I need certain color I should buy it?

[@synthman7562]

YES YES YES YES YES YES YES YES YES YES YES EUZUY UDIX

[@milomotekaitis7604]

How long do you wait after your first coat of 2k, before hitting it with a heavy coat?

[@OMGscaleworks]

Not to long. About only 15 minute after 1st coat.

[@milomotekaitis7604]

@@OMGscaleworks Ok, and how did you find the manga pro mix dry sanding kit? When I went to their website, it didn't seem to exist.

[@OMGscaleworks]

@@milomotekaitis7604 Try this www.mangapromix.com/product/abrasives-paper-%E0%B8%81%E0%B8%A3%E0%B8%B0%E0%B8%94%E0%B8%B2%E0%B8%A9%E0%B8%97%E0%B8%A3%E0%B8%B2%E0%B8%A2%E0%B9%80%E0%B8%97%E0%B8%9E%E0%B8%82%E0%B8%B1%E0%B8%94%E0%B8%9C%E0%B8%B4%E0%B8%A7/11001002936000305

[@milomotekaitis7604]

@@OMGscaleworks Thanks, I'll check it out.

[@timothyfritz9604]

Do you have a link on what and where to buy the polishing sponges?

[@OMGscaleworks]

Here it is www.mangapromix.com

[@droberts1664]

Dude,where is pt 2 ?

[@OMGscaleworks]

Part 2 will be released on Saturday, April 27 at 8pm.(GMT+7) Thank you for your patience.

[@droberts1664]

@@OMGscaleworks sweeet thanks.

[@picklestheswift]

Why is there so much Pigeon noise 😅

[@OMGscaleworks]

They made their home in my backyard. I hope their kids will grow up and will leave there soon 😅

[@burinchatchaloy5146]

ช่องคนไทยหรือครับ กดติดตามแล้วครับ

[@OMGscaleworks]

คนไทย 1000% ครับ 😂 ขอบคุณมากครับผม

[@aldovillegas8774]

where can i buy those paints?

[@OMGscaleworks]

www.mangapromix.com tell them that you know their products from my channel. Maybe you can get some discount. 😉

[@aldovillegas8774]

@@OMGscaleworks ... thanks i will try

[@tracybales7036]

Where can I get the foam polishing set for my Moto-tool

[@OMGscaleworks]

They available at www.mangapromix.com

[@hopper5042]

ใช้เคลือบเงาของอะไรครับพี่

[@OMGscaleworks]

เคลียร์ 2K ของ Manga Pro Mix ครับ

[@Van_Tuijl]

can you please tell me the name of the tool you are using the x-020 thinner with? it looks like some kind of sponge?

[@OMGscaleworks]

It’s call “Panel Line Eraser Stick” you can find it here www.aliexpress.us/item/3256805714066251.html?src=google&aff_fcid=526573954810466bb97e4ebf632d0160-1712889003697-09800-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=526573954810466bb97e4ebf632d0160-1712889003697-09800-UneMJZVf&terminal_id=4692828958b24820b9858686375d3011&afSmartRedirect=y&gatewayAdapt=glo2usa&_randl_shipto=US

[@Van_Tuijl]

@@OMGscaleworks thanks! Just bought one 😊👌🏻

[@jl35700]

@@OMGscaleworks Thanks for the link ! Great job mate

[@mrb2917]

Manga REALLY needs to make it easy to order from the USA. Not a message on facebook or insta, a real website that ships to the US 😪

[@OMGscaleworks]

Sorry for the inconvenience. I’ll forward your comment directly to Manga Garage’s CEO. Thanks a lot for your feedback.

[@mangagarage]

thank you for the advice

[@jamesdaniels3699]

In other videos I heard bird's, this one crickets.🦜🦗ha hilarious.