05 Silverado gets oil pan gasket replaced (easy to do)

Welcome to another video, here I install a new oil pan gasket and clean it while I paint it a bit. easy process if you have a Silverado or GM and some other vehicles. I show somewhat and try to explain the stuff you gotta do.
Any question leave a comment, share, subscribe
Follow me on snapchat and instagram
/ virus_built
Snapchat: Hondasi_ed
Music:
Track: Lost Sky - Dreams [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Lost Sky - Dreams | Tr...
Free Download / Stream: ncs.io/DreamsYO
#oilpangasket #gasketreolacement

[@moataz04]

Thanks for the hint of the hidden bolts.

[@juanseguin111]

You solved my exact problem. I had already taken all the bolts off too and didn’t know about the plugs. Right on my man.👍

[@VirusBuilt]

No problem! Glad it helped out dude!! Those damn plugs 😃

[@jesusmunoz5184]

@@VirusBuilt did you remove the starter and the small dust cover for the fly wheel?

[@trystangreenenwald2202]

Your a life saver for those last two bolts I almost broke the oil pan because I couldn't understand why it wouldn't come out.

[@maurosgarage]

thanks for the video! I know it was easy but I did not know about the hidden bolts! thanks

[@VirusBuilt]

Sure thing bro! Yeah super easy those two bolts were the hidden ones especially with the plugs that covered them but no problem! 👍🏼

[@Dt.hope23tv]

Awesome work 🎉fam 😊

[@user-li8px3ll7w]

You did a great job. Don't stop. Just taking it off was all I needed. Thanks, I'm doing my silverado here pretty soon.

[@gerardopuentes6001]

It was very explicit, thanks

[@bryan_trades8867]

I seen on another video you have to use rtv on the front corner of the oil pan because it leaks from there even with a one piece gasket?

[@JDcay]

Getting that crossmember off is the true definition of how working on a car goes haha

[@alsharifhusain]

If you open the oil pan, better to clean oil strainer and change the o ring

[@christianmartinez5681]

I’m will be changing the oil pan on my 07 what are the torque Specs for the two lower bolts that connect into the transmission and not the ones with a plugs thanks 👍🏼

[@santosalmendros8970]

Eres el único que describe correctamente no ablo ingle pero lo entiendo con todo lo señalado en el video gracias y bendiciones

[@u2ooberboober]

Thanks for this video! You saved me a big headache. Was any kind of sealer used on the new gasket?

[@VirusBuilt]

No i didnt used any but if you want to keep it from moving apply little bit of rtv around..

[@EKfourjames]

Did you have to remove the starter?

[@StatikPsycho]

What are the size of the two hiding bolts, I can’t find the socket

[@TrainerTakumi]

thank u

[@antonyquezada6894]

What torques for the bolts?

[@terrykarney2515]

What size are the bolts and how many are there

[@tudocervera3764]

once you removed the pan can you see the rod bearings or is there a secondary pan covering them?

[@VirusBuilt]

Yeah theres a plate there.. after you remove it you can see the rod bearings..

[@OnlyNotes]

With a rust belt truck like mine, there's no way that front crossmember is coming out 😂 I think I'm just gunna live with the leak. Good vid though

[@VirusBuilt]

Jajaja cmon bro you can do it use an impact should come off! Thanks bro i tried for few vids ive done 👍🏼😃

[@thatvegashighrisedude2757]

Some pb blaster a day ahead of the work, then ugg dugga that bitch !

[@garynewsome674]

Is this the same app for a 05 duramax

[@daltonbedore8396]

good stuff. i wonder if my obs 5.0 is very similar?

[@VirusBuilt]

Hmm should be i think just check if you have clearance to drop the oil pan

[@jesserobertson6383]

Wish it was that simple for a 4x4 Silverado

[@alafrosty]

10:15 - where the magic happens!

[@VirusBuilt]

🙌🏼 😁

[@castledomeknives9395]

Good video...is it a 4.3L??

[@VirusBuilt]

Thanks and yes it is for now sadly 😄

[@obschris4119]

How did you remove those rubber plugs on the rear bolts of the pan

[@VirusBuilt]

With some pliers grab it from the side and just pull them

[@drewchilton487]

How much did that crossmember weigh that you took off, rough gestimate?

[@VirusBuilt]

Should be around 8-15lbs i believe might be wrong anything 20lbs

[@gabem5861]

@@VirusBuilt oh shit I thought it would be like 40 pounds!

[@esifoner]

Good Job... Mmm it's the same for an astro 4.3?

[@VirusBuilt]

It should be bro since its a 4.3 but should send me a pic on instagram to check it out

[@esifoner]

@@VirusBuilt ok bro thx

[@coozbee]

Watched your video, but it was very dark and I could not see a lot of what you were doing. But it was informative. Maybe use a light so that viewers can see.

[@VirusBuilt]

coozbee yeah bro next time ill do that thanks for the advice ill sure be getting a big light to go on the camera and sorry it was dark!

[@Angel-wf6jh]

Is it weird i geeked out a bit about that wood wheel chock lol

[@VirusBuilt]

Not at all 😜 lol

[@jesusmunoz5184]

@@VirusBuilt did you have to remove the starter in the process?

[@VirusBuilt]

@@jesusmunoz5184 no i didnt even touch it 😀👍🏼

[@jesusmunoz5184]

@@VirusBuilt thanks, I'll be knocking out my 4.3l in the morning.

[@VirusBuilt]

@@jesusmunoz5184 goodluck if anything let me know!

[@luisv8413]

Easy but time consuming, live in a mobile home park. I have to move fast when the vehicle is lifted before the rats come out haha.

[@VirusBuilt]

Jajaja i feel you bro it happen to me already 😂

[@edgardoestrada313]

Did you use rtv ? For the gasket

[@VirusBuilt]

edgardo estrada no bro just placed the gasket on it and snugged the bolts then just did a quarter turn thats it

[@edgardoestrada313]

Virus Built thanks brother man I will be replacing mine this weekend I’m use the felpro hopefully no leaks

[@VirusBuilt]

edgardo estrada yeah bro hopefully goodluck and be safe 👍🏼 try to change also the oil drain bolt and get it with a crush washer or gasket on the bolt if you havent changed it..

[@johnsuravilla6360]

Did u have to unbolt them steering rack?

[@VirusBuilt]

No i did not have to just the crossmember

[@tudocervera3764]

what was your oil pan torque specs??

[@VirusBuilt]

I did mine by feel just a good snug not too tight .. but the torque spec is 18ft lbs just go on a cris cross pattern when tightening the bolts.. what i did was i put mine by hand till they were all deep in then snug them cris cross which you can do but with a torque wrench 👍🏼

[@tudocervera3764]

@@VirusBuilt ok thanks,, since its the oil pan and thats where the spends the majority of its life thats where youll get the most oil leaks.. there fore its highly recommended to torque as specified by the mfg.. 18 ft lbs is correct.. no oil leaks on yours ?

[@VirusBuilt]

tudo cervera yeah bro.. and im getting like lil spots but not from oil pan or drain plug since i change those.. im assuming might be from timing cover or valve cover but im not to worry anymore since in the future im going to turn it into a v8 5.3 .. but before slappin it on imma change all the gaskets to keep them fresh..

[@tudocervera3764]

@@VirusBuilt ok .. check your oil pressure sensor right behind the carb .. those tend to leak alot.. mine was i changed it no more leak..

[@nolasalvage8841]

Yeah love the fact u have it fast forwarded the whole fucking video thanks would love some dialogue bc maybe my truck isn’t like this and ur vid title says it is smh🤦🏻‍♂️

[@mikeym4860]

Same process on 4.8?

[@VirusBuilt]

Yeah bro pretty much similar to it

[@derakbell8143]

Yes

[@BordanDutchChocolate]

Thx

[@VirusBuilt]

No problem 👍🏼

[@donaldduke9544]

Nice job you are to hard on yourself

[@michaelcalloway3679]

Well you could have started with what size ratchet is needed. Duh?

[@Nsx405]

I thought you said it was easy.

[@VirusBuilt]

It was or does it look hard to do? 🤔

[@jar145022]

Virus Built idk can’t really see much. I just wanted to know if the support bracket was gonna be difficult couldn’t see much after that. I did see what I needed to tho.

[@ZBrink11]

Lol, easy to do on RWD 🤦🏻 You gotta add that to the title!

[@QdotRich]

I couldn't see anything. 🤦🏾‍♂️😂😂😂

[@90celicagt]

Greay video, sadly what caused me to not watch it is the lame music that is obnoxiously loud

[@ThuggBoi69]

Easy cause its not a 4x4