07-13 Silverado Back-up Camera Install

Purchased a back-up camera from Amazon and installed during the stereo upgrade. the stereo video isn't finished but here is this part.
#nnbs
#backupcamera
www.amazon.com/Silverado-Sier...

[@kingdavo7655]

Hell yeah, maybe worth updating!! Nice tip man

[@franciscogama930]

Excellent walk-through on tailgate install to aftermarket radio

[@NiceGarage]

Thank you very much!

[@eddieallen1748]

Good video however, the hole in the bed of your truck where you stuck the wire through is where the tool goes to lower your spare tire. If you ever need it, you’re gonna find it difficult to get that tool in there.

[@zackbell4045]

I installed that exact same camera last weekend, taking it to the dealer tomorrow to get my factory nav unit flashed to be able to add this, thanks for the great video on it

[@NiceGarage]

Thanks man. Was there an easy way to connect n to the head unit?

[@zackbell4045]

@@NiceGarage I had to buy another harness to put this on my radio but other than that it was pretty easy, I found a video on how to wire one up which made it even easier.

[@zackbell4045]

Oh and I think I am going to try to mess with the camera a bit to try to angle it down some more so I can see my hitch, I will let you know how that works out

[@NiceGarage]

@@zackbell4045 yeah, I’m curious. I’d like to angle it down just a little now that I’ve used it a bunch hooking up the trailer.

[@zackbell4045]

So I was able to angle it down a bit but I found that the camera isn’t centered and it seems a little off. I filed the bottom and right side of the hole down on the Bezel a little bit and that really helped with the adjustment. I also flipped the little screw into the bottom hole on the camera itself to give a little more angle, now I can see my ball a lot better and hooking the trailer up is a lot easier. Sorry this took so long to get done, when I got my radio flashed it messed it up and I had to send it off to get fixed.

[@russellhaskett6830]

Taking off the tailgate can make part of this easier, as well.

[@brandonchappell8545]

You know...the tailgate does come off pretty easy

[@cliffwhitaker2855]

Your tailgate has metal wire holding them up if you take one of them raising your tailgate half way up and wrapped around the tailgate lack pin your camera will be over the trailer ball be help when hooking trailer up..

[@NiceGarage]

I’ll try that, thanks

[@parzival5884]

with my Kenwood all i did was remove the taillight splice my wires and run the video cord to the camera to my radio but mine wasnt a handle camera like yours

[@CaswellCustoms]

I’ve got a license plate camera and it has no issue seeing the receiver and the trailer. I can also still use the camera while my tailgate is down, instead of it staring at the ground.

[@choward874]

Did you get it from Amazon?

[@alexismendoza8710]

where did you get it bro?

[@willklingenstein3628]

How did you wire it at the head unit?

[@wideopendiesel4265]

So on the radio wiring does the red hook to the purple and white wire on a pioneer

[@gocro731]

So you left the camera end (black, purple, red) wires unconnected. But connected the front end wires to the deck? I have the same camera, and a pioneer deck. I connected the front end purple to reverse trigger wire (pioneer harness) the red wire to accessories wire, the black to a black wire from the pioneer harness. I plugged the AV into the cam jack (AV IN) got all my settings on the deck correct. NO CAMERA DISPLAY. Any tips?

[@MrBritrider]

Nice helped me a lot. What size cable guard do you use? Also, can you please tell me what was the square opening size for the camera. The opening in the bezel before you inserted your camera.

[@NiceGarage]

I could measure it but it came all assembled. May even me mounded in. I’ll check it

[@Channel505]

thanks for the video, it's very helpful, was wondering what monitor you would recommend for this cam setup. thanks again.

[@NiceGarage]

You mean that you’re not changing the radio?

[@Channel505]

@@NiceGarage lol, yes i meant radio

[@matthewatkins8921]

Could you link me to the specific radio you have and are using with this?

[@Dolfan0925]

You said you were going to play with the wiring setup. Did u record that?

[@DarthRaider]

I need this, but is it possible to buy this kit with a lock? Or can I buy the lock separately? Mine currently doesn't have a a tailgate lock

[@mark3704]

Is this just a plug and play or do I need to wire it up to?

[@destinsmith1848]

How did you wire this?

[@mikelltodd746]

I can't seem to find this by the number on the box, could you post a link ? Thank you for the video.

[@alejandroromillo1780]

Hi brother just follow you tutorial but the image on my screen it’s on the opposite side , any advice , I appreciate thanks

[@ricmelyair]

Where u conecy the cable red black and purple please sir

[@cadenhicks3136]

How did you wire purple wore

[@cameronsienkiewicz6364]

You do realize you can take the tail gate off to give yourself more room between the edge of the bed and bottom of the tailgate lol

[@Redd013]

How did you wire this????

[@johnjesus971]

Great video! Thanks! I love the headunit. If you don't mind sharing the model number!

[@NiceGarage]

Thank you, MVH-1400NEX

[@ricardomoreira6639]

Dear ... does this Pioneer MVH-1400NEX work with the steering wheel controls? Thanks for your video... really helpful

[@NiceGarage]

The steering wheel controls do work but from the iDatalink interface.

[@ricardomoreira6639]

@@NiceGarage so we need the radio plus an interface!!! Thanks for the answer

[@TheYukon383]

What model head unit is that ??

[@paulmcintosh3307]

Where can I get it to buy

[@JuanGarcia-pk6bt]

How did you plug it in the back on the radio the red to the purple and white and then plug the yellow rca into the video inpunt or ?

[@NiceGarage]

Honestly I can’t remember but I made an update video on the wiring behind the radio. Hope you enjoyed the video, thank you

[@CashflowMeDaddy]

How did you get it into the console area from under the truck?

[@NiceGarage]

Sorry I’m just seeing this, somewhere closer to the end, you see where I put the wire through to the inside

[@shawnmckee14]

How did you drill the hole in the tailgate?

[@NiceGarage]

The tailgate has drain slots in the bottom of it. No drilling necessary.

[@mrmotofy]

What if the bed needs to come off, or the tailgate...not fun

[@NiceGarage]

The camera unplugs, I just happened to wrap it in tape but I can take the tailgate off if needed

[@silenthill5794]

Psst...tail gate comes off for easier installation.

[@MrRickyp1129]

Hello, I wanted to ask a question because I am already desperate, I bought a tailgate camera for my 2007 silverado, I connect it to the radio and it tells me that there is no signal, I don't know what to do or if it is some problem with the settings on the radio...thank you

[@NiceGarage]

Have you checked to see if the camera is getting power? I haven’t seen that error before

[@MrRickyp1129]

If it has power, because I removed the camera that comes with the radio and connected it to the tailgate and it tells me that there is no signal, perhaps it is a problem with the adjustment of the settings in the radio of the resolution of the camera or that it came broken, I already know I wrote to Amazon and they will send me another one to check.

[@wcBUDman]

Just lower the tailgate when backing up, camera should be facing the ball.

[@john.4908]

I have the same one.. how’d you get the lines to show?

[@davedeweese9461]

Read the manual for Green - Parking Lines - Default shows - Connect if you do NOT want lines to show

[@Miguel-jw9hh]

Do you have the link to purchase this same one?

[@NiceGarage]

www.amazon.com/gp/product/B07Y4PR7VM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Looks like its not available anymore though. I can tell you it still works, and works good.

[@ryanbaircraftmechanicandsm7524]

Will this work with any after market radio?

[@NiceGarage]

Any radio with a camera input

[@ryanbaircraftmechanicandsm7524]

@@NiceGaragethanks. I just for 13 Silverado and am putting in a Apple car play double din radio and want a camera

[@molsen35]

What model Pioneer did you get?

[@NiceGarage]

Pioneer MVH-1400NEX

[@molsen35]

@@NiceGarage Thank you. I have a 2013 Silverado. Your video is very helpful.

[@djdro4764]

WHAT KIND OF STERIO IS THIS WHERE TO BUY PLEASE MORE INFO

[@NiceGarage]

Pioneer, bought from Crutchfield.com

[@vitaliydiyguy7570]

Why not just removing the tailgate would have been faster☺️ hay it worked so👍🏽

[@josh80504]

How did you wire it up ?

[@NiceGarage]

I’m going to make a wiring video this coming weekend

[@sirvaldivia2852]

@@NiceGarage if you make a really good video you’re saving me 12,000

[@jefframsum8386]

What did the reprogramming cost?

[@NiceGarage]

I installed an aftermarket Pioneer radio, it plugged right into that.

[@jefframsum8386]

@@NiceGarage I found a new factory DVD deck,camera,bezel,wiring everything I need,I called GM and they claim it will require reprogramming, does this sound accurate?

[@sparky6307]

what radio setup is that ?

[@NiceGarage]

Pioneer MVH-1400NEX

[@sparky6307]

@@NiceGarage one more question, the trim piece that goes around the radios where did you get that ? It looks like it matches extremely well

[@NiceGarage]

@@sparky6307 Metra 95-3305

[@AloneWithTheHorde]

Silver-(RaYDough)

[@bigdognance]

Thanks for the video and not showing any of the actual wiring hookup after all your work...lol....sheese....what a waste!

[@dogoargentino1420]

Made in China🥶🥶🥶🥶🥶

[@NiceGarage]

I know

[@evilfbody3618]

You didn’t even show how you hooked up the wires or what you connected the wires to. Bad video install

[@NiceGarage]

I appreciate your comment. 249 people enjoyed it. Guess you can’t please everyone. Thanks again!

[@unmalo2768]

Dude!!! You talk too much, just show us already!!!!!!!