1/10 Scale Discovery 1 BRX01 HOBBYWING Fusion Pro 2300kv Off-road 4x4 RC Car driving #2

[@KobtsevRC]

#rccardiscovery1 #brx01 #fusionpro #2300kv Prepare popcorn, the video is long, I will be glad if you watch it to the end, I appreciate it! 0:00 In this episode 1:00 Day one Change tire foam 2:29 Install Wfeel Hub 3:20 Preparing to ride 4:08 1/10 scale Discovery 1 scale driving 5:03 Night RC Car driving 6:13 Day 2 6:44 Jetboil coffee break 8:48 RC Car Land Rover Discovery 1 Rock driving 16:45 We change the location 18:05 Riding in the forest КС Car Discovery 1 23:53 My camera

[@krashkingrc9715]

Definitely a cool video and your summary of it is great

[@KobtsevRC]

Thanks for support! See you

[@RCPlayGround]

Discovery 1 BRX01 Work is good job.

[@KobtsevRC]

Thanks so much for watching. Yes its nice combo but need update chassis width. But i like that See you soon

[@KatuRou]

I love your realism too

[@KobtsevRC]

Thanks so much for support! Glad you like it/ See you!

[@rcjono]

Great share mate!

[@KobtsevRC]

Thanks for the visit! Im glad you like it! See you!

[@octaviorodriguez6849]

This brings back so many memories of my old 96 metallic green discovery!!! Time to light up some good marijuana and enjoy the show!

[@KobtsevRC]

Thank you very much for your support, I'm glad that you like what I do))

[@n22pdf]

Awesome vid my friend 🤩👍🏅

[@KobtsevRC]

Thanks for the visit! Glad see you here! Thanks for watching and suport me. See you soon!

[@willshobbytime]

Very good story via video, i liked a lot! Disco is one great looking car!

[@KobtsevRC]

Glad you liked it! I'm glad to see you here! There is still a lot of work ahead to make this body look good. My trunk has already arrived, but I need some more parts. Lots of work ahead See you!

[@samrcchannel]

Very scale looking discovery 👏🏻👏🏻👏🏻 good job my friend 👍🏻👍🏻👍🏻

[@KobtsevRC]

Thanks so much! Not finish by I can’t wait. It’s ok for first run.

[@mauriciodelvalle4648]

Hello great video.. I would love to see one video with 2 or 3 rigs travelling the same spot at the same time.. like a safari video

[@KobtsevRC]

Great suggestion! Yes, I will do it soon!

[@rcvantuna]

Love this Body ! ❤top

[@KobtsevRC]

Lots of work ahead to make it look good. Thank you very much for watching I appreciate it!

[@rcfungames]

Hi bro 👋 You have done an amazing job with this build🔥💯🔥 Congratulations 👏

[@KobtsevRC]

Thanks so much Yes but this not final a lot of work ahead. I hope all bee ok when im done))) See you

[@rcfungames]

@@KobtsevRC well that is what this whole hobby is about, trial and error... If we don't try we will never know if it works 🤔 And this is why your channel is so interesting because you are doing things that not everybody does. So thank you very much for the cool content 🤜💥🤛 And I'll be looking forward to see how it turns out. 😉

[@KobtsevRC]

Thank you very much my friend! I'm glad you like it!

[@samholdsworth8487]

When I was playing with R/C rally cars as a kid I always dreamed of having a super scale accurate, low speed 1/10 off roader with a Land Rover shell to play with in the woods, but those kind of models didn't exist yet. This is exactly as I imagined it when I was a kid, it even has the Mk1 Disco body like my grandad drove in the '90s! Lovely stuff.

[@KobtsevRC]

Thank you very much! A lot of work with this model ahead. I will try to make it better! See you later!

[@Fourwheeljive]

Photography was nicely done. Fun scale off-roading. Your Discovery looks real. Thanx for sharing. L32

[@KobtsevRC]

Thank you very much! Glad see you here. I need make a lot updates but it will be cool

[@Fourwheeljive]

@@KobtsevRC You are on the right track.

[@KobtsevRC]

Thank you very much for your support I appreciate it!

[@4x4rcadventurer]

A work of love, well done. It's easy filming when it's nice and warm outside 😉

[@KobtsevRC]

Yes, thank you! Glad you like it. See you soon

[@adultswithrcs]

Thanks for sharing your point of view and BTS scenes and showing what it takes to do these videos every week just to show roughly hours of editing and time filming these rad RC trucks!

[@907arcticrc6]

Awesome video and Rc brother Excellent run and footage Thanks for sharing Have a good one and stay safe 👍🥶👍

[@KobtsevRC]

Thanks so much! You have no idea how much I want peace to come and all this madness to end See you

[@qrisemrc]

I'm curious about the inner form reviews in the video. Bro.❤👍👍👍

[@KobtsevRC]

Thank you very much for watching! Soon I will get a new interior See you!

[@mypassionrc-studioxd40lous66]

So very good video, I need to learn to relax when making my videos, thanks for sharing your wonderful truck and adventure 🙏☮️✝️🏜️

[@KobtsevRC]

Thank you 👍for watchind support my channel! See you!

[@neildaniels5443]

Really calming video,.....are they stock shocks or did you upgrade 🤔

[@KobtsevRC]

These are stock shock absorbers with red springs. There are black ones in the kit, but they are soft. You can see how I put it together here. kzbin.info/www/bejne/g4bbaoRuaNp-pdk

[@neildaniels5443]

@@KobtsevRC ah ok ,Thanks for replying 🙏

[@KobtsevRC]

no problem

[@Bradkozakandfriends1830]

We’ll worth the wait. The truck turned out great. I like the camp stove as well. You really do it up right. Good choice on driver. I have the same one in my TRX Blazer. Thanks again for more awesome entertainment.

[@KobtsevRC]

Thanks so much for watching and for supporting my videos im really glad you like it/ See you

[@RCplamodel]

*Thank you for sharing this very informative video! 👍👍👍🚙🚙*

[@KobtsevRC]

Glad you enjoyed it! Yes its cool truck but a lot work forward. I like it

[@Cronus_1]

Definitely not lazy. Keep it up.

[@KobtsevRC]

Thanks, will do! Glad see you here! See you soon!

[@Rcworldshop]

This is one of your best videos. Its real work and passion shows way more then the big Tr ..movies. This one is an inspiration.

[@RcDungeon]

Wow I have to finish the video but as always beautiful filming, and the Brx is awesome!!! Thanks for sharing the entire process with us I love that the most!

[@KobtsevRC]

Glad you enjoyed it! See you in next video

[@KobtsevRC]

9:17 Start driving 1/10 Scale Land Rover Discovery 1

[@RCBushBasherDownUnder]

Such an improvement to the wheels. I have been chasing the same solution. To remove side wall failure or at the least reduce it even at the cost of tread grip. You have an amazing setup. Thank you for sharing from Australia 🇭🇲

[@KobtsevRC]

Glad it helped! Thanks for watching and suport me. Thanks from Ukranian! See you

[@natkobe3158]

Прикольна модель 🔥🔥🔥🔥 Чекаю нові відео 😉👍👍

[@KobtsevRC]

Дякую за перегляд. Тут ще багато що треба доробити, але в цілому норм.

[@ihsrc4220]

Wow buddy so cool 💙

[@KobtsevRC]

I'm glad you like it Thanks for watching and support me/ Lots of work ahead but i like that See you

[@vicentalbertvelert9195]

Gran trabajo, me encantan tus vídeos, haces unos montajes sencillos a la vez que entretenidos, no me canso de verlo.🔟💯💯💯💯💯

[@KobtsevRC]

I'm glad to hear it! Thank you very much for your support! I am always glad to see you here! A lot of interesting things are ahead! See you!

[@creekcreeperrc7972]

Great video my friend 👍👍

[@KobtsevRC]

Thank you for watching and kind words! I'm glad you liked it! Thank you for visiting my channel and writing your review! Your support is very important to me and I appreciate it. Don't forget to like the video, it will help me a lot! Have a good day. See you soon, I'm always glad to see you here!

[@krashkingrc9715]

Awesome video excellent build great upgrade’s excellent run truck definitely looking so realistic out there excellent driving with an amazing rig take care and be safe brother

[@KobtsevRC]

Glad you enjoyed it! Yes i try See you in next video! See you!

[@g.b-MTB-trail-jumps3062]

perfect camp and trip bro looking most fun keep going enjoy my friend 💪😎

[@KobtsevRC]

Thank you, I will. Next video was filming. See you soon

[@ClassicSteelRC]

Excellent video as always! And yes, I watched it all the way through! 👏👏👏

[@KobtsevRC]

You're the best! Thanks so much my friend/ Next video was filming today. Start editing/ See you

[@ClassicSteelRC]

@@KobtsevRC Thanks and you're welcome! I hope you're enjoying my videos too! I posted one yesterday morning, I hope you'll like it! 🙂

[@BlackVVirk]

Completely amazing! Indistinguishable from a real trucks! I own a 2004 disco 2 se7, 4.6 liter v8, it loves Moab, I need to build this truck you have here in black!!

[@KobtsevRC]

I would also like to change the color, but probably next time

[@ourr.c4065]

Your videos are awesome my friend, discovery looking excellent.

[@KobtsevRC]

Glad you like them! Yes looks not bad but need more improvements

[@octaviorodriguez6849]

Schwartz, 😂. My dad calls him “Arnold Too many letters.” 😂 only in Spanish.

[@KobtsevRC]

Yes it's true)))

[@JoeOvercoat]

😳😀😄😆😂🤣😂🤣😂😅

[@BlackVVirk]

You put in alot of hard work my man!!

[@KobtsevRC]

Yes, it's not easy, but I like it! :)

[@ShahriarFarkhan]

I love watching this :)

[@KobtsevRC]

I'm glad you like what I do! See you in next episode

[@O3Sraji_ch]

I quite like the form.👍

[@KobtsevRC]

Thnaks so much/ Yes its classic vehicle Its looks amazing i hope i can finish this rig soon

[@RCAdventurers]

Good job, I’m busy building one of these at the moment for my channel 👍

[@KobtsevRC]

Good choice, I really like this model!

[@vintage1522]

love this one, as All the others also. I am building my 3rd brx01 and looking to do something other than the lc70 body, as I have 2 already. Love the discovery body. Did you have to change anything with the axles for this? I was told to use the brx70 to brx90 conversion., and the boom racing discovery body mounting set. Really afraid to do this body as I am horrible at painting. May have to have someone paint it for me. You did a wonderful build and video. Ay advice for this body on a brx01 would be great!!

[@KobtsevRC]

Yes, you were absolutely correct. You need to expand the axles with the help of a kit. BRX70 to BRX90 and boom racing discovery body mounting set asiate.es/aff?l=205293&i=94028 asiate.es/aff?l=204190&i=94028

[@vintage1522]

@@KobtsevRC thanks, just wondering if this body is a bit harder than the 2 lc70 bodies I did for my other brx01s. Seems like this one will take some ingenuity as far as drilling holes and placement of those holes. I would hate to mess it up. Don't know if I will be able to. do this body. Maybe I have to have someone do the body, or just do another LC70 body. Do not really want 3 of the same bodies. So I need to do the brx90 axle conversion and not the brx80 conversion?

[@KobtsevRC]

yes you need BRX90 i did BRX80 and add extended better if you use BTX90. I think that there is nothing difficult in assembling this case, you can see my video. kzbin.info/www/bejne/iJzRn4p5er55a8k

[@rccrawlerextreme]

Very nice 👍

[@nikru7540]

Hello! How do you fix the offset of the wheel to the body? Brx01 is to narrow phat70

[@KobtsevRC]

Do you need axle extensions asiate.es/aff?l=162647&i=94028

[@2Beam-g7c]

Hey, i know you don't read these anymore, but where did you get the interior for the Rover?

[@hoschie8044]

What Hubs you use?

[@KobtsevRC]

Hello im use Boom Racing XT512 5-Lug Aluminum 12mm Wheel Hub Adapters 12mm Offset www.asiatees.com/display.php?brand=Miscellaneous&model=All&id=161118&rc_pal=2345678

[@JoeOvercoat]

While turning the screws can get old, especially on a big build, I suggest that often we do ourselves a disservice if we reach for an electric screwdriver when a true hand tool would do the job. 🤔

[@KobtsevRC]

yes, I try to use a hand screwdriver to loosen or tighten the screws. I only use it when I need to move a lot.