1/12 MN models D90 Defender (kit) in water,snow,ice,mud,rocks

MN models did a amazing job with this kit. This vehicle is extremely capable for it's size. With available upgrades you can make it trail ready to tackle the big obstacle. Thanks for watching more to come 🤜🤛

[@ricksscalerc2222]

Such an awesome spot for tiny trucking! Really enjoyed this,that little truck looks great! Nice job my friend.👍👍👍

[@777Jesterhead]

Best livery on this rig!

[@thatsmyrc]

Awesome bud I have the same rig on the way to go with my 1/12 scale line up 👍🏼

[@TomleyRC]

This is an awesome location, my MN has died....so need to upgrade it obviously now lol.

[@rcjourney8080]

I will be doing same Phil I really did enjoy this run. Truck really is a blast to drive. Keeps u on the edge cause u just feel like it going to roll over

[@modelnutty6503]

R.C. Journey, the Fayee 6 spoke tires/rims about 5 dollars a set, are about 3/16" shorter (barely lowers ride height but helps) and offset to give about 7/16" wider footprint, on flatter/squarer faced tread. also pick up a couple 100 gram rolls of 2 mm solder, to wrap the front rims (between tire slots) 2 layers thick, with 3 wraps electrical tape stretched down tight over that, and a spot of CA at the end of the tape to keep it locked. climbing 45 degrees without back flipping pretty easily. takes 2 sets of tires to have the spare to match... oh well! for shocks: www.ebay.com/itm/A285004-Aluminum-Shock-Absorber-for-RC-1-16-Car-Set-of-4-Black/273444473375?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 you do have to drill/tap holes right behind the front+rear trays 1/8" below the top edge of the frame for ride height to be about same as stock, and for them to be soft/smooth riding, giving good/easy flex. use small plastic tubing spacers at the bottom to keep suspension rods and shock bottoms more inboard. even tipped in that far, tires don't rub against those shocks. crazy? www.ebay.com/itm/10-x-10mm-LED-Bezel-Holder-Plastic-USA-Seller-Free-Shipping/233060582832?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 these and 10 mm 0.5 watt LEDS, the bezels fit perfectly into the body, cut away the "headlight glass" and the grill is a perfect fit right over them with chrome rings sticking out just 2 mm like they belong there. really BRIGHT light for 25+ feet. CA the LED's into the bezels where they touch/stop, paint their backs silver or white 2 coats then 3 coats black so they don't bleed funny. 3 mm yellow LED's up front, 2 red ones in back, 2 white ones (largest lenses) connected to motor to light up when in reverse... fun and games with 1/4W resistors so they don't burn out of course. (back up light connection point, TYVM HobbyDaddy!) that's about where I'm at with building a green one right now doing the small budget mods, the really bright headlights are NICE! reverse lights without anything special at all is a really cool little trick too.

[@bayupurnamasandi2430]

Nice 👍

[@tetifroho8424]

Nice vidéos! !!!!!!!!!!!!!!

[@adityanovski]

Belissima...👍🤗😃

[@Isan-pz5cq]

Waterproof

[@YoShImUrA53]

Love it! seems pretty capable! Did yours come with rear windows? If not, where did you get yours, please?

[@rcjourney8080]

U can use any old clear plastic. From new toy package or old welding helmet plastic shield,😃

[@user-bj1hg7qb5t]

나도 [랜드로버] MN-D90 RC 카 를구입하기전 큰기대를 하였으나, 기대 이하였다 ,[랜드로버] RC 카 를 갖고 있고 조종 도 해 보았지만 영상 과는 전혀 다르게 라이트 의 선을 거미줄만 하여 금방 끓어지는등..배터리 갈이끼우는 위치도 하체부분에 있어 매번! 나사를 풀었다 조였다 를 반복 해야 해서 큰 불편한데다 속도 까지 느리다 같은 모델의 RC 카 임에도 어찌 저리 차이가 날까 ?

[@GMS86_RC]

bisa tunjukkan bagaimana anda merakit perangkat elektriknya. terima kasih

[@RichartAsia]

Just burned my motor climbing a rock.... 😭 have to take it apart & DIY new motor soon.

[@rcjourney8080]

☢️Look up mabuchi 180 motor and look for low rpm 12 volt should be much better torque

[@RichartAsia]

@@rcjourney8080 sure will trying to get hugh torque low rpm

[@pawe4618]

Welcome. what is this engine and differential? give me a link

[@rcjourney8080]

Yeah of course fill free to shoot me a pm on FB for more links/upgrades www.wpl-rc.com/collections/electronics/products/180-motor-with-gearbox?ref=TRENTMANN

[@theningalholidaysofficial9090]

Water proof anno

[@mantapzgla8620]

this original part???? no modif???

[@rcjourney8080]

Yes stock kit running with 20 amp esc 2s Li-po

[@AddyRCBuddy]

Just finish a build on mine and take it outside for the first time. I had a great time with it, you can check it on my channel. Great video as always man!

[@Vineon1]

I bought the same en it didnt even start 🙁

[@rcjourney8080]

Was s it an rtr or kit.

[@christianfischer825]

The rtr version has very bad and very cheap electronics inside. My didn’t run properly too. But I’m going to upgrade it with better parts, and used the rtr only as base for my own build. 😊

[@latefangs423]

does it come with full electronic

[@Hjerte_Verke]

No, kit version does not. You need a radio set (TX & RX), battery, battery charger and ESC (electronic speed control). Kit comes with 17g servo and 180 motor.