1/24th Scale CUSTOM Truck-PART 1

Part 1 of a generic 1/24th scale pickup truck I start to customize and make somewhat cool
+++++++++++++++++++++++++++++++++++++
FACEBOOK:
/ outlawspeedshop
INSTAGRAM:
/ outlawspeedshop2001
Website:
www.outlawspee...
My email: [e-mail]
+++++++++++++++++++++++++++++++
PATREON:
/ outlawspeedshop
PATREON MEMBERS:
-Ray Berger
-Ed Ostrander
-Dave Christensen
-JOEY WILLIAMS
-Chris Smith
**SCALE STREET GARAGE( / funkyrat1 )
**KRISTIAN STANILAND( / 1st-64th-customs-33185... )
**JIM SILVA( / jimsilva-silvadiecastc... )
**ALVAREZ’S DIECAST CUSTOMS( / alvarezazel )
**DEVILS DETAILS DIECAST( / @devilscustomsandcreat... )
**MATCHBOX GARAGE( / juggalo7979 )
**GUNSLINGER GARAGE( / @gunslingergarage )
-WILLIAM ROBINSON

[@OutlawSpeedShop2001]

10 minutes into a 21 minute video...a thumbs down. Not quite breaking the record, but darn close!! Someday I'll get it down to under a minute. lol

[@bunkerblue6158]

I'd like to see you do that Nova another time. It's pretty badass looking, especially those mag wheels.

[@MetalMania3DTV-TAS-AUS]

Jobs not even done yet, wtf with the thumbs down, glad you made fun of it, obviously a hater out there, as if any of us need that right now, anyway on a brighter note looking forward to part 2, no pressure 😂 great job, cheers KC

[@MindSuite]

This critic must be subscribed though.

[@Rollormotor]

Probably someone that doesnt like the slammed look, or a Jada collector mad you stole the chassis from a Mustang, Looks good so far

[@nickdeavers5816]

I figured your general mayhem would have that record seemed like you got a lot of hate for that

[@70delta]

I'm liking this, now i have to go out and get me one of those trucks and mustang to do one for myself,

[@jasonleone5480]

Very interesting project. A little variety is always a good thing, and the larger scale adds more levels of detail. Looking forward to the end result.

[@ThaKillerKlown]

Love where this is going. I've been inspired! Everyone stay safe.

[@MartyLJ57]

Keep mixing them in. Variety is the spice of life.

[@charliejames1981]

Keith I'm glad you are doing a 1/24th scale truck. I wanna see this to the end ...

[@jimmybuffettear7720]

I dont care what scale it is as long as it has wheels and custom, really happy to see you do one of this scale, and a ford at that. Im currently working on a 72 Chevy pick up, and its nice to see its rival, yours looks pretty dam cool already

[@bretthobell1687]

I only used to restore my vehicles u til I started watching your videos which are fantastic I am now attempting to customise them not had much luck yet but I'm still trying keep up the good work 😊

[@sprintmademe]

No hood equals twin turbo set up or blower. Great stance being achieved.

[@xr8rick]

Loving the larger scale builds. There’s just so much more detail you can do. Looking forward to the next episode.

[@davidneilson3508]

Keith that’s going to be awesome when it’s all finished up. Don’t keep us in suspense too long for part 2 lol. Definitely a cool custom build my friend.👍👍😊

[@marvinalancornell8275]

Keith, love the 1966 C-10 that your building . 1964 thru 1966 are my favorite . I have a 1964 C10 a real truck (not a toy) I've been building it for 3 years off frame rebuild. I've had 5 of the 64-66 C10, build them & the right money comes around there gone... But the 64 i have now is NOT FOR SALE. I'm 61 years old getting to old to keep this shit up... This is my last build. KEEPING THIS SON OF A BITCH FOR SURE.....Love your work Keith keep-um coming my friend.

[@jeffthompson5032]

I like the large scale builds. Can't wait to see the detail you put in this one

[@clarewatkins5230]

WoW yesterday I dug out my forgotten 1/18 1/24 models n seeing this video I've got GMC panel van n Ford F150's lightning truck that both need real Help so I can't wait for part 2. As Always Love your builds n relaxing style hope your staying safe FULL SEND U.K.

[@Rollormotor]

Cool build, I cant wait to see what you are doing with the engine compartment after hearing you are not going to install the hood. Those wide front meats are going to make it difficult. Always great to see how you work on any issues you come across. Looking forward to see how this turns out, keep the good stuff coming, thanks and stay safe

[@davidbeeson1178]

My friend you are badass at watch you do, there is no way not to enjoy it. Prayers go out to the family's of those that you know who lost their lives to this Coronavirus. So far so good I'll see you on part 2 and maybe part 3. Stay safe and happy Easter.

[@MetalMania3DTV-TAS-AUS]

Awesome build looks super cool so far, looking forward to part 2, 3, cheers KC Tasmania Australia

[@BigfootRC406]

Have been eye balling some 1/24th scale myself. Makes me want to give it a shot also

[@JimmyMahaffey4]

This is cool! I was looking at mine yesterday thinking about cutting it up. I just might now!

[@stevenoldham564]

I can’t wait to see the end result! I think it’s going to turn out pretty good. Love watching your videos!

[@Merylstreep1949]

1) Leave it dark blue 2) Please do more of the larger scale cars👍👍👍👍 3)Yes, your videos are inspiring me to if nothing else start building my huge stash of 1/24 scale plastic kits, most worth some crazy money but I'd rather build em...

[@leegoldeneagle9003]

I. Love. The. Way. It's. Going. Looking. Nice. Too. Me. Brother. Keep. On. Trucking. Lee

[@SwampersRC]

Looks great so far! Can't wait to see what else you do to it!

[@TheSalemCrow]

I like it. You're off to a good start on this one.

[@arctic1144]

I think you should do more 1/24 scale builds if anything!

[@ChaosCanyon]

I did something similar with the exact same truck, except I just modified the existing chassis instead.

[@frankhays8221]

Awesome buddy I think it going to be a awesome build I use to do the same would bounce back and forth between 1/64 and 1/25 scale all the time it breaks up the cycle but thanks for sharing buddy as always keep up the great work and videos bro hope you and your family stay safe 👍🏻👍🏻👍🏻👍🏻😎

[@user-ik5bm6nw9j]

i love it when you do1/24 scale

[@scrapperdscrapperj3948]

Love the larger scale

[@krazy4baja]

Yes please!, more 1/24 scale mods. You give us inspiration to give custom jobs to do. Please keep doing 1/64 custom too. I want to start custom 1/64 hotwheels or matchbox then maybe get into 1/24 scale. This will be all new to me so I’m trying to gear up and get the right tools for custom work. I’ve got my dremel tool, and ordered tap set, drill and screws. Need a few more tools and will be ready to start small projects and then get more into advanced customs later. Right now I’m just happy to do wheel swaps and learning how to drill, tap and use the tiny screws. Then will get into painting later. Love your work. Looking forward to seeing part 2 of the low rider truck build. All the best to you , your family. Stay healthy and safe and please be careful out there everyone in the states. I know there a lot going on in the states out there. Please be responsible and care for others.

[@Peter-qt7oj]

👍looks good so far finished truck should look SWEEEEEEEEEET keep up the work love the videos to watch in lockdown in the UK keep safe Thanks 🤘

[@wh1zz_b4ng]

Nice build! I love the 1/24th scale stuff. I’d love to see more of these 🍻

[@pacula33]

Love your work.. I like the larger scale cars.. I'm a Chevy guy so I was stoked to see the nova. Then bummed to see you use a ford.. lol. Stay safe out there Keith..

[@adamblack4722]

We need a part 2 !! 😁

[@humbertoortega1670]

great project ive been working on the same truck also a first for good luck

[@Raiderzombie57]

So far so good can't wait for part 2 & 3 can I ask what you goin to do with stock wheels?

[@MichaelBlueMusic]

Part 2! Part 2! Lol. Looking great so far! 👍

[@gpr8695]

I like it alot. I don't collect 1/24 because I have a hard enough time having enough room for 1/64. But that looks great !!!

[@cvr4FT]

Looking good Kieth. Love how you just 'Go with it'. Sorry to hear that you know people who have passed and I'm surprised that you keep doing this stuff but if you enjoy it (and I know plenty of us do also), and it helps... Keep going man, we love it. Regards, Weirdo Logic.

[@martindaredare]

Great inspiration, and a very interesting video, I like where this is going.

[@lotharrenz4621]

Jada and their boldly bigger wheels than anyone else models... one day we'll find two cylinders in there instead. XD I kind of knew you'd go for that 454 big block when I saw YT's preview, because I used to have the same model kit (and painted it Opel Turquoise metallic, and then the spray can coughed, and... never mind), but then you grabbed that mustang and I was like, "...what." but, great idea, this is going to look extreme and awesome! but I fear you're gonna have to put the bumpers back on above the headlights once you're done with slamming. :)

[@jonce6750]

That's lookin bad ass keep them coming

[@jx4racing681]

Love it so far!

[@martinchristain4964]

That looks like a pretty interesting project. Hope that it has a big blown engine.

[@montesampson8149]

Nice, & eddy of maiden in back ground

[@carlosdelgado614]

Nicely done my friend

[@RoadRunnergarage8570]

A well detailed casting to work with with loads of potential...

[@user-ik5bm6nw9j]

i cant wait to see part2,3 awesome keith

[@dannybracken6982]

Love it Keith. Think it's going to be bad ass. Stay well and safe. From Albuquerque nm. Have a blessed Easter.

[@leotherocker94]

I have a f100 56 in 1/24 scale,i'll stay tune to see the whole process.. i want to lower my diecast cars

[@6ickness1]

awesome work.. I just got a few die-cast and wanted to start moding.. thank you

[@wadehendryx7378]

I love it Keith. I love how your mind works. It's kinda all over the place. I mean in a good way. Can't wait to see the final product. I think you're probably going to be doing more of these. You're going to get addicted. Have you tried the reading glasses. They work for me. Just have to get used to them. Stay safe and healthy. Happy Easter.

[@Merylstreep1949]

The Nova parts would have been way cool, I think u need to do something with the Nova stuff👌👌✌

[@RoadRunnergarage8570]

Good progress so far.. I'll be anxious to see the finished product...

[@urideamabal]

Like it so far! Looking forward to part 2

[@B1GSL1M]

normally i dont like the bigger models but i guess its cause i like your style of vid because im looking forward to the next one, keep up the good work bro

[@klj5150]

I love the Video! You gave me some great ideas. I noticed your bracelet, and I am a disabled veteran who was so bored during the pandemic, that I re-ignited my passion for collecting my diecast cars and motorcycles. I didn’t love the Motormax die-casts, but now I’ll grab some to customize. My big question is this, the accent tells me you MAY be a Sox fan...lol, I a New Yorker so there is that. Either way, you have a new subscriber and fellow East Coaster!

[@deepjunkgarage]

Until a year ago most of my hobby time was 1/25 scale model cars.....it had gotten expensive with resin and aluminium parts so I though hey, how about 1/64 ? Now I buy paint and parts cars, order wheels and tires. LOL I dig the 25th scale...and besides it's your show, do what the f**k you want. LOL 🍻

[@TheNyarcangel]

Thats turning out to be super sweet!!!

[@dubbedmodz7253]

Gonna be clean my man!! I like it

[@jonoedwards4195]

I hope to see You put the Nova Block in, Ive never seen anyone attempt this type of Custom! Unreal OSS, got Me Psyched for part two.

[@chrissimpson9334]

Love the build looking good bro doesn't matter how long it takes I'll be here watching if the virus or storms don't get me I live in North West tenn

[@eddiegonzales8431]

You have inspired me to try my hand at customizing. Having a hard time finding tires and wheels at what I think is a fair deal. Any help would be appreciated...

[@christophercastilaw3157]

Heck ya!! Looks good!! Love building 1/24 rigs

[@brianharris7243]

I prefer larger scale-it's what I work with mostly.

[@TheRealGraylocke]

Loving this!

[@RoadRunnergarage8570]

Nice job modifying the bed!!

[@timothysealey1391]

I Hope U Finish The Truck With Some Candy Paint Going To Look Bad Ass

[@TheJoeblow1126]

Is there a part 2, yet. Very nice build this far.

[@rtistik94]

Great video! Starting to get back into my models. Looking forward to bingeing your videos

[@MrStevenDeer]

Looking good, very innovative

[@jerrymoran9479]

I like the larger scales personally got a few myself one I think about the same size it's a suburban and a few a little smaller but I like the fact that there is more detail more u can do with them and customize for it make the plan process a little long cause again there's so much more u can do but the finish with all the details is pretty cool still like 1/64 but only so much u can do to those which is alot by themselves but anyway can't wait to see how u finish this one

[@jonathan100yearsago]

well here comes the relieve for this day but the agony will continue after the video done "the waiting"

[@AlvarezAzel]

Really liking where this is going, can't wait for the 2nd part. Good to see you tackling the larger scales too, it starts to feel more like an actual project to work on rather than something you can knockout in an afternoon.

[@EastSideWitch]

This was an awesome build. I am still searching for the second part LMMFAO!!!!!!

[@mortenhenningsen940]

Interesting prosject. Sonder what happens to the blue stang...madmax?

[@rickybobby.88]

Cool video! Looks like a hobby that I’m going to enjoy! Bought a few cars and kits. Hope you continue to have fun!

[@KanYahryEl]

Sir,I want to Thank you for sharing your knowledge 🙏. This video definitely inspired me to finish my project. Which I did,building a few more then posting a video. Probably after the New Year to Spark it off. And I Subscribed 👍 And I'm Sorry for your Losses, May God Bless you and your Family!🙏🙏🙏

[@blackbill9981]

I always use the original frame but i cut it for fit the new tire..and make it easy to put it back together with the body.

[@aarondwood6628]

I’m starting to make the switch from 1:64 to 1:24 especially for customising

[@ruffride93]

Looks awesome you do awesome work keep it up

[@RoadRunnergarage8570]

I see you are trying a larger scale to work with here... I'm interested to see how this comes out..

[@robduguay7252]

Looks great can’t wait to see the end result

[@Leader460]

You do bad ass work bro.,big or small,do then all 💀💀💀☠☠☠👍

[@1yris1]

I think it would have been easier to narrow the base between the wheels and then you wouldn't have had to chop on the body as much on the front and also just cut a little off one side of the axle to also narrow the axle but you do nice work all the time keep it up we enjoy the videos

[@johnnyramirez9533]

More 1/24 scales !!!!!

[@user-ik5bm6nw9j]

need a part 2 keith

[@smalltowncustoms9793]

Its gonna look bada$$

[@1st64thcustoms5]

True master at work!!! Love it

[@blakeschoettmer9440]

You should put the hood on it. You should do more of this cars too

[@sabinwills7687]

You probably know this, but something you can use for wheel tubs are old pill bottles. Cut them in half (or quarter, 1/3rds, whatever) and the length you need them. I usually would paint mine a silver (aluminum) and glue them in. An old 1/24th-1/25th scale modeling tip. Like I said, you probably already knew this, but in case you didnt.

[@OutlawSpeedShop2001]

I did not know that, it’s brilliant! I don’t usually work at this scale

[@bigdogcountrymusic7146]

I liked it a lot, I would like to see you do a 1/18th scale custom 4x4 truck.

[@hodgeshotwheelsanddiecast5192]

Don't feel like the lone ranger coping with all this damn covid shit. Im going freaking stir crazy not having any live music, car shows, etc. I have a friend dealing with this damn third world country disease. Hope he will pull through.

[@ronsmusclecardiecast]

Looking good brother.

[@dragon320194]

Do what you wanna do bro mix it up as much as you like

[@michaelhebert8020]

The is my first ever model when 12. To cool

[@michaelhebert8020]

Now im 56. Love your work brother.

[@jasongaba2512]

Looking good Bro....I've been watching your vids for a couple of days now an your work is extraordinary an now I have to Sub...KUTGW Buddy.....👍...

[@RoadRunnergarage8570]

It also looks like you are using a street rod theme with this build...

[@olovskiPL]

Awesome build, looking forward for pt 2. Tthe Ford Coupe in the background (brown in top right corner) is this a custom of yours?

[@OutlawSpeedShop2001]

olovski no, it’s on the chopping block because I want the wheels

[@olovskiPL]

@@OutlawSpeedShop2001 what is it exactly? (m2/greenlight etc). i need one in my life ;)

[@klj5150]

What was/is the end result?