1/5 RC Losi 5T -- diff shimming

[@Victic005]

My 30 degree North Roller stripped the ring gear after just running 15 minutes in dirt. It didn't have a shim in the pinion gear. That was their installation. I install a new set of gear with the shim,and its kind of thigh, but loosing up. Now I ordered the Losi housing thinking that's the issue. But your video address my problem.

[@me8u73]

Nice one 👍

[@GyuHobbyRC]

I"ve never seen such a great video in my life I wish you prosperity. 형제 친하게 지내봅시다. 😄😄😄😄

[@ntjack8894]

Another great informative video.

[@me8u73]

Thanks buddy😎

[@kimdra9321]

WoooW very nice amigo 🤟🏽😎🤟🏽

[@me8u73]

Thank you 🤙

[@sufyaankhan232]

Hey man my diff seems to get stuck slightly whilst spinning its like it gets to a tight spot you have to get past, any recommendations

[@me8u73]

you'd have to pull it apart. might be damaged teeth or maybe dirt got inside. something might be bent out of shape. bearing might be on its way out. Lots of possibilities!!!

[@itsmike4646]

Put just 1 shim on the OUTSIDE that’s what I did no more crunch and no more play

[@teamawesome2171]

👍🏿👍🏿

[@JOHND_RC]

🔥👊🏼👍🏼💯🎯

[@rcsendandblast1579]

Wrong spot to shim it You want to shim the crown over closer to the input gear Put a shim on the inside of the bearing on the crown side of the diff it will fix your meshing issue. And that shim you used was way to thick 👊😀

[@me8u73]

No idea if its possible to shim as you've described. The shim i used was just as an example. 😉

[@rcsendandblast1579]

@@me8u73 it should be able to shim with very thin shims I’d hope so

[@joshchatwin8179]

Don’t go so hard on brakes that’s how i broke mine

[@me8u73]

Driving on tarmac kills them too