1/6 RC WWII JAGDPANZER 38(t) (HETZER) 3D PRINTER table size (300x300x340)

Sorry I have to repost this video he fade away ? Hope you all enjoy my video Please like and subcribe 😀👍 Jagdpanzer 38 (Sd.Kfz. 138/2), originally the leichter Panzerjäger 38(t),
known mostly post-war as Hetzer, was a German light tank destroyer of the Second World War based on a modified Czechoslovakian Panzer 38(t) chassis.
Prototypes of the Jagdpanzer 38 were ready by 1944 and mass production began in April of that year.
The Jagdpanzer 38 was covered entirely with sloped armor, and possessed a compact form and low silhouette,
giving it much improved defensive ability over other self-propelled guns.
Armament consisted of a 7.5 cm Pak 39 L/48 gun and a remote-controlled MG 34.
It featured a wide body to accommodate the four-man crew,
as well as strengthened lower hull with enlarged wheels, guide rollers and tracks.Jagdpanzer 38s first entered service in July 1944,
and would eventually be assigned to a number of units, including infantry,
Panzerjäger and Volksgrenadier divisions. BMM and Škoda continually modified and improved the Jagdpanzer 38 during production of the more than 2,800 vehicles built.
Owing to the ease of production and high operating rates, the Jagdpanzer 38 came to serve as Germany's main tank destroyer in the latter period of the war,
making an important contribution on both the Eastern and Western Fronts.
The Jagdpanzer 38 was intended to be more efficient than the much more ambitious Jagdpanther and Jagdtiger designs of the same period.
Using a proven chassis,
it avoided the mechanical problems of the larger armoured vehicles.

[@satorrotas]

Complex but really interesting work, great result 👍

[@LorenzoJalbert]

Glad you like it thanks Pascal!!

[@satorrotas]

@@LorenzoJalbert 😉👍

[@jamestkirk1864]

Wow this tank is so Awesome! You did a Great Job on building it! Thank you for sharing!

[@LorenzoJalbert]

Thanks Michael! 😊

[@Cormano980]

3d is the future, this way most people will afford models they could only dream about Good job 👍

[@LorenzoJalbert]

True, thank you for watching my video!😊👍

[@YOELCOMANDANTE]

It's just that what you build is amazing and the end result is spectacular. Great job my friend. At your command.

[@LorenzoJalbert]

huge thank you my friend! 👍🙂

[@soyomero1]

Espectacular trabajo. Saludos.

[@LorenzoJalbert]

Gracias mi amigo🙂👍

[@ramblers69]

Amazing work Lorenzo, love it my friend, :)

[@LorenzoJalbert]

Thank you Tom!

[@Eseres80]

Awesome work, buddy 😊👍

[@LorenzoJalbert]

Thank you so much Buddy!

[@davepriddy9263]

Great build.

[@LorenzoJalbert]

Thank you!

[@andrewwhite6509]

You my friend have done it again, Brilliant simply brilliant.

[@LorenzoJalbert]

Thank you Andrew!🙂👍

[@elijones2041]

you make it look so easy. i also saw your German one axle, drums trailer video, so very well done Lorenzo! 👍👍

[@LorenzoJalbert]

Double huge Thank you Eli!

[@johnnyssik]

Fun to the next level!! 3D printers are magic ✨

[@LorenzoJalbert]

Thank you so much!

[@bobimpo8158]

Im planning on making this. My favourite turtle

[@LorenzoJalbert]

This is a very rewarding project! 😊

[@Mona8519]

Are that the files from Warprintz? Bought the same and will start to print the 1/6 Hetzer this winter. thx for sharing.

[@LorenzoJalbert]

Yes they are the same files good luck very nice project, good information and detail have fun. 😊 Thanks for watching

[@DinoFilmClay]

That was an incredible creation. I appreciate your great technical talent. The movement of the gun barrel of the artillery tank was incredible. Have a good day friend. ♥️🕊️🌍🦕

[@LorenzoJalbert]

Thank you Dino!😊👍

[@DinoFilmClay]

@@LorenzoJalbert Most welcome friend ♥️🦕

[@tattookarlos1546]

Very nice !!!

[@LorenzoJalbert]

Thank you so much!

[@justray65]

Fantastique mon Lorenzo....

[@LorenzoJalbert]

Un gros Merci Ray!

[@massiLGB]

Great Work !!! where do you find the stl files ? I have a printer with the same bed as yours, but probably you need a lot of cutting and paste ?

[@LorenzoJalbert]

For sure lots of cutting and paste Enormous project very rewarding you can't find the files here : cults3d.com/en/3d-model/various/jagdpanzer-38-t-hetzer-scale-1-6-3d-printable-rc-tank-model good luck have fun!

[@nitzerebbhead]

Have you had it off road and if so how would you rate the power of the drive motor? Looks like geared 550 brushed motors, but it looks like there would be enough room in there for larger ones like geared 775s. I'm going to build it, but I'm concerned it may not have enough power.

[@LorenzoJalbert]

The drive motor are okey more power will be a good upgrade the tank is light to compare to my other tanks that give him an advantage but the motors are humming after running a while if you plan to go off road a lots I recommend bigger motors more power is always better and to know if you have enough room for bigger motor build it before you buy the motor and with the side plate and the motor measurement you will figure it out if it fit because for me now to have a proper measurement I will have to remove a lots of components that I'm not ready to do. Hope this help you and good luck building it it is a very well done tank have fun!😊

[@legolasstudios]

Cool! What printer were you using and how long did this take? it looks like a monumental project

[@LorenzoJalbert]

Hi, I use and Ender 3 pro Printer and I have to slicer some parts. He took me around 3 months to prints, assemble and paint everything nice project 😊

[@SuperErikRoss]

Actually the Sturmgeshutz 3 is credited for the most tanks killed by the German Army in WW2 i believe also a very reliable and well sorted chassis quite a number of them were produced and it proved to be very capable as well with the same 7.5 cm Pak 40 gun

[@LorenzoJalbert]

Thanks for the info and for watching my video!😊

[@SuperErikRoss]

ShoeBetcha !!! Hetzer is one of my faves too you should do a vid on the Kugel Hetzer Flakpanzer i just discovered it not to long ago 🙂

[@LorenzoJalbert]

@@SuperErikRoss I will look in to it Thank you

[@SuperErikRoss]

@@LorenzoJalbert ShoeBetcha !!! 🙂

[@timothypavlick76]

Are you designing these files yourself, or do you find them somewhere? if the latter, could you tell me where because I would love to make this. (I'm almost done making that Leclerc Tractor :D)

[@LorenzoJalbert]

cults3d.com/en/3d-model/various/jagdpanzer-38-t-hetzer-scale-1-6-3d-printable-rc-tank-model😊

[@parker1ray]

How many rolls of filament did you use?

[@LorenzoJalbert]

I didn't count but about 5 or 6 I think🙂

[@snedhepsquadron406]

how many hours of printing is the upper hull?

[@LorenzoJalbert]

Two to three weeks depends how many hour a day!

[@snedhepsquadron406]

@@LorenzoJalbert thank you! very nice looking final tank.

[@LorenzoJalbert]

@@snedhepsquadron406 😊👍