1/8 Porsche 911 Rally X Tekno Sc Vs Losi Ten SCTE 3.0 | Losi | Ten Scte 3.0 | (

1/8 Porsche 911 Rally X Tekno Sc Vs Losi Ten SCTE 3.0 | Losi | Ten Scte 3.0 | ( @I DO RC
Link to Body shells can be found below,
deltaplastikusa.com
Wheelbase is for 325mm - 330mm cars with a width of around 300mm.
#rcrally, #losi, #tekno,
In this video I DO RC showcase the new 1/8 body shells from DELTA PLASTIK USA, in the 'PORSCHE 911 CLASS RALLY X' Sandford rally championship.
Sporting beautiful 1/8 Porsche 911 GT body shells a LOSI Ten SCTE 3.0 running Castle Creations 2200kv 6s motor and Mamba Monster ESC running a 6s Lipo (Blue and orange race colours) VS. a TEKNO 410.3 SC with Tekin 3600kv 540 Motor on 3s Lipo (Black, Red and White).
Both with Pro-Line beadlock wheels (TEKNO with OFFSET WHEELS, giving a wider stance). the Losi is on ProLine Badlands 2.2/3.0 tyres/tires and the Tekno is using ProLine Calibre Tyres.
These body shells are a fantastic fit on these Short Course Trucks with only the body post holes needed drilled for your specific setup and lowered or raised for correct height.
ABOUT:
I DO RC (aka Adam Harding) was established to bring you the highest quality, highly produced, RC videos. All shot in 1080p 60fps or higher, of high end fully upgraded RC cars and crawlers and eventually all things RC
These videos are to inspire and educate all RC enthusiasts on great upgraded parts and RC advice but mainly for entertaining viewing, think Music film clip with RCs.
I DO RC has custom made outdoor courses for 1/10 and 1/24 scale rock crawlers and a track for 1/8 scale Short Course Rally cars.
Axial SCX24 Deadbolt, fully upgraded, Redcat Racing Gen 8 Axe Edition, fully upgraded, treal metal brass upgrades, yeah racing, yeah racing trailer, Savox servo, custom awesome axial scx24 track, yeah racing complete metal upgrade set, GPM red aluminium front and rear axle set, AXSC-S04 | Yeah Racing SCX24 Complete Metal Upgrade Set, SCX24012-R | GPM Red Aluminium SCX24 Front Gearbox w/ Hardware, SCX24013-R | GPM Red Aluminium SCX24 Rear Gearbox w/ Hardware, AXSC-030 | Yeah Racing SCX24 HD Steel Centre Front & Rear Drive Shaft Set, AXSC-029 | Yeah Racing SCX24 High Mass Brass Wheels Hub Hexes 2Pcs, SCX2437FRS+5-BK | GPM Hardened Steel #45 Front CVD Joints, Rear Drive Shafts & Copper Collars Set, AXI31567 | Axial SCX24 1.0, AXI200000 | Axial SCX24 2019 Jeep Wrangler JLU CRC Clear Unpainted Body Shell w/ Decal Sheet, Savoy 4kg steering servo, panda hobby 180 size motor, AXSC-042 | Yeah Racing Gun Metal Steel Axial SCX24 Deadbolt Linkages Set, hot racing 43mm aluminium air shocks for losi, MCC543T06 Internal Spring 43mm Air Shocks (blue)(4) - Losi Micro Crawler, Gens Ace Tattu 600mAh 45c 2s limo battery, the best scx 24 set up, upgraded scx 24, upgraded redact racing gen8 axe edition, awesome ultimate backyard rc six 24 1/24 scale track, home made rc 4wd track, Adam Harding, best scx 24 deadbolt, scx 24 axial Jeep Wrangler, gun metal grey paint, Australia, Tasmania, GoPro hero 7 black limited edition dusk white, Wondershare Filmora 9, brilliant quality rc video, scx 24 deadbolt high quality video, parts from hobbies direct, wicked rc track, best scx 24 track, greatest axial scx 24, greatest scx 24 track, best upgrades for axial scx 24 1/24 4wd, best high quality rc video, best rc video ever, best rc scx 24 deadbolt movie ever, I do rc presents, the ultimate rc scx 24 adventure,
Best mods and upgrades axial scx 24 deadbolt, Jeep, 1/24, best 1/24 course
Horizon Hobby, 2021, VS.,
#Porsche #RallyX #Losi

[@e3s-rc]

Nice video

[@MauGino]

Love the video, top notch as always.

[@IDORC]

Cheers dude, thought you’d like that one

[@hamdin6972]

Realy nice video👍👍👍👍 i love it......

[@IDORC]

Thanks mate, plenty more on the channel you should like. Cheers for watching

[@Rcghostnrk]

Nice bro I like the content

[@khmmr7566]

Woo 🔥🔥🔥👍🏾😎👍

[@drsarahjames2082]

Love the cornering!

[@norcalrcexperience7594]

I was looking at converting a scte 3.0 into a rally car. Thanx for the awesome video showing one tearing it up.

[@IDORC]

No probs mate, cheers for watching, you’ll find more rally style bodies for the SCTE 3.0 on my channel, it’s such a great RC I have two lol means I’ve had lots of bodies hahaha

[@norcalrcexperience7594]

@@IDORC Between those two sct trucks which one do you think made a better rally car?

[@IDORC]

@@norcalrcexperience7594 hi mate, that’s a difficult question… not much difference at all and both awesome built RCs… to hard to say but I do like LOSI but then again lol

[@glennjthompson332]

Wow!!! Too much power, but less trottle on and go low, Not bad, those rally cars do good at any racing, with electifying performance, this is the best has ever seen! (A+) excellent set-up

[@IDORC]

Thanks Glenn, I appreciate the comment, was a fun video to do

[@EJ-74]

Awesome 🔥

[@IDORC]

Cheers Eric, hopefully more race vids this summer on the track, thanks for watching

[@Welshrobb]

Wicked cool. Video / driving / Cars / Editing. Great all round, big thumbs up 👍👍👍👍

[@IDORC]

Thanks Rob, she came up looking alright

[@SenopatiLautSelatan]

Great work..cool rig 👍😎👍🍻

[@IDORC]

Thanks mate, this one came out pretty sweet... always wanted to do a two Porsche rally. Thanks for watching again

[@SenopatiLautSelatan]

@@IDORC i really like ...my big like mate..👍😎👍🍻

[@poloshobbyzone6355]

I really liked your video! Did you modify something to fit the body mounts ?

[@IDORC]

Hi mate, cheers, no nothing needed to be modified. Thanks for watching, more coming soon

[@edwardharding5989]

That one is brilliant in every respect Adam, and potentially could be one of your best productions. Regardless it would clearly be hard to beat when it comes to RC car racing, particularly because of your camera work and editing of the final video cut.

[@IDORC]

Thanks, it came up alright for a rushed job

[@eliezeralonso7429]

Wow such an amazing video there. I enjoyed every second of it. Well editing and very cool car you got there. I'm looking forward to more rally videos like this because they are just so cool. Keep up the good videos.

[@IDORC]

Thanks mate, plenty more Rally vids to come, we just put an extra section on the track and a jump so should be fun.

[@zingzing_media]

Bloody brilliant mate some great slomo shots and love the on board footage 👍👍😀😀

[@IDORC]

Thanks Zing Zing, it was a fun one to do, took a bit longer but came up a treat. Thanks again

[@smallscalemotoring]

Great videos! What thickness bodies are you using from Delta?

[@IDORC]

Cheers mate, these are 1.5mm, seem to hold up pretty well

[@TheTurboPer]

Really nice! Did you have any foam bumper in the front and/or rear of these cars? I imagine the bodies break easily if not?

[@IDORC]

Hi mate, you’re spot on! Some foam added to the front bumper to hold the nose of the body, it also stops it from wobbling around. Cheers for watching

[@TheTurboPer]

@@IDORC Aha! The front bumper stock other than the added foam? And what about the rear? Thanks for answering my questions 😀

[@IDORC]

@@TheTurboPer all good mate, anytime! Only the front has been packed with a foam sponge… fitted to the original bumper with cable-ties or simply slid over your front original bumper.

[@SpringWoodsRC]

That's awesome footage pal 😊👍 fantastic cars to love the 911 😊👍✌🙋‍♂️

[@IDORC]

Cheers mate, the vid came up alright indeed, the 911’s did look awesome flying around the track together. Cheers for watching

[@Polardrums]

What tires are you running on the gulf 911?

[@IDORC]

Hi mate, they are 2.3/3.0 badlands tyres with F11 proline beadlock wheels…. A great combo

[@mattdamonjr]

have you guys tried the traxxas rally wheels? i bet they would look a little more scale and rip.. awesome video

[@IDORC]

No haven’t tried them Rob, will look into them. Are they 2.2/3.0” wheels?

[@mattdamonjr]

@@IDORC yeah they come on the traxxas 1/10 rally. same rim as the traxxas slash.www.amainhobbies.com/traxxas-bfgoodrich-rally-tire-w-rally-wheel-2-white-standard-tra7473/p379066?v=241248&gclid=CjwKCAjwy42FBhB2EiwAJY0yQtik0mbgKgmjWYug6ahb_-KX4mj1XEwoGxnOkbK0QW1ub6xgZWUtBhoCYz0QAvD_BwE

[@IDORC]

@@mattdamonjr thanks Rob

[@trollpatrol1163]

What decals did you use for the gulf livery car?

[@IDORC]

Hi mate, it’s painted those colour and then a mix of decals…. Most were from the delta Plastiks USA decal sheets for various bodies, I had a few delta Plastiks sticker sheets

[@trollpatrol1163]

@@IDORC Thanks so much! I honestly wan't expecting a reply from you given that the video was over a year old! Great looking car and was just thinking of painting a delta plastiks porsche body the same paint scheme.

[@IDORC]

@@trollpatrol1163 no worries mate, still making the RC vids so always try to answer viewers questions asap. Yeah I do love the delta pkastiks Porsche 911 body also the BMW is a great looking/fitting body by delta.

[@hyenatv3]

Would that body fit on a traxxas slash?

[@IDORC]

Perfect for a Slash

[@hyenatv3]

@@IDORC awesome thank you