1:87 micro RC / Herpa VOLVO FH Trio-trans

My fourth work has been completed.
The concept in this production is a low roof truck.
There is a limit in the space where the mechanism can be placed, but by installing them on the bottom of the chassis, the interior of the car was also made.
Please register and enjoy watching videos.↓
www.youtube.co...
I uploaded the making photograph to below URL. It is small amount, but please look at reference.
box.yahoo.co.j...
My other works are below. please watching!!
• Finished !! 1:87 micro...
• 1:87 micro RC / Rietze...
/ @kasky_rc_factory
こちらは4作品目です。今回は低屋根タイプのトレーラーヘッドに挑戦しました。
ハイルーフ車両と違い、ルーフにメカニズムを搭載するスペースが無いので車体下の限られたスペースを利用することで、車内の運転手の再現をしています。
I made it with reference to the following movies. All wonderful works !!!
【Der Theoretiker】
/ mikromodelle
• Mikromodell - Firma Ge...
• DIY - Motoren - Getrie...
• Elektronik für den Mik...
　etc...
【monsterchannel24】
/ @monsterchannel24
• Incredible RC trucks, ...
• RC EXTREME! R/C trucks...
　etc...
Thank you for watching this video.

[@muttley1956]

If you hold it close to your ear you can hear the radio playing in the cab.

[@RANDOMCHOICESTV]

XD

[@arunaraghu4453]

Lmao XD 😂

[@flippop101]

Amazing job! 👍

[@kasky_RC_factory]

Thank you👍 If you have time please take a look at my other videos.

[@zenleeqizheng2884]

Wow I love it :) Great job 😋

[@orcnic]

I built the exact same truck too..but without the lights..

[@ffdf3671]

👌👌👌👌👌👌👌

[@val1000r]

where buy ???

[@i-ones700]

I want... 😃

[@DIGITALRC]

Wonderful small modell.. lovely video, great job 👍

[@kasky_RC_factory]

Thank you for your compliment.😉

[@kasky_RC_factory]

Thank you 😉

[@TheIntegra42]

Fantastic job...excellent craftsmanship..

[@gamechanger-gcr]

wher to buy this product i want this product plz tell me where from buying thi truck rc scale

[@derickdoveglass]

This isn’t a product? He made this by hand. There is only one of them.

[@MaxSupercars]

Very good patient work! 😊

[@kasky_RC_factory]

Thank you 😉👍

[@dave41184]

I wish I had the knowledge to do something like this :) Excellent!

[@modelllichtsysteme]

Well done! :)

[@kasky_RC_factory]

👍👍👍

[@SlickDiecast]

Hi, how did you program the receiver for the lights?

[@forteleaerieneromane]

Great work!

[@kasky_RC_factory]

Thank you for watching😉

[@matthewservice267]

Very well built and excellent clearly shown steps in the build process.

[@kasky_RC_factory]

Thank you so much😉👍

[@miranda7904]

Fabulous

[@mirocapin4759]

Its unbelivable wow wow, wish I could do this Congrats👍👍👍👍👍👍

[@anaskurdiobiedat287]

Wow

[@muhammadawisabdshahadan1117]

Amat dahsyat gayezzzz,terbaik semua berfungsi dengan tepat...good job good luck and good life but safety first 👍🥳😘😍 i love it

[@Zerker666]

This is amazing, hope the 1/87 RC trend kicks off and we get awesome sets to buy for people who have two left hands like me.

[@kasky_RC_factory]

Thank you for watching. Someday, I also hope that toy makers will sell these finished products. Please take a look my other videos.👍

[@unorthdoxcleric6953]

I really want to get into this but to make it on my own is very daunting.

[@DDSRdds]

Hi , Amazing work , the link dont open, can you send list of parts and foto on Mail ? Thanks 👍new sub

[@videosquevocegosta2395]

faz um disco voador!!! tenho certeza que voce consegue!! parabens pelo trabalho

[@truckerray7533]

Job well done. love it!!!

[@kasky_RC_factory]

Thank you 😉👍

[@n.j.degroot744]

Beautifull build truck!!! 👏🏻

[@kasky_RC_factory]

Thank you 😉👍

[@TomBikonkav]

Bärenstarkes Video! 😉

[@digitaldharma]

Beautiful! This made my Sunday Afternoon Thanks🤓

[@zeph5225]

You must love that truck

[@kasky_RC_factory]

😏👍👍👍

[@DDSRdds]

I can see you write you bought the kit , did you bought other things , or are this truck built only with the kit , thanks 👍

[@DabidGuty]

Nice job! Well done, it's amazing

[@kasky_RC_factory]

Thank you 😉👍

[@HellfrozeoverDitto-lj1rm]

Wow! Please tell me where I can find those semis! It’ll be so awesome to drive on my layout!

[@grcguyreadcar4683]

I found it, amazing tiny RC CAR!! Really looking goo❤️ood

[@TheToymanbb]

Simply amazing work you do in 1/87 trucks. it's always incredible watching your builds.

[@kasky_RC_factory]

Thanks for the compliment! I'm glad😊

[@Каналдлясебя-х5о]

Я представляю как же ты с ним на возился.

[@paulwakeham2275]

I was wondering where can i buy the gearbox and motor i am in Australia

[@kasky_RC_factory]

Thank you for watching. Most of the parts I used are here.👍 www.sol-expert-group.de/1zu87modellbau:::48.html?MODsid=fspa3psc5ju73nhgeprd12p031

[@paulwakeham2275]

@@kasky_RC_factory Thank you I will order soon

[@devenweeks2830]

@@kasky_RC_factory Where could I get the rc truck?

[@dylanheaton4055]

Hello..great RC...model.....can you make to order?

[@amoghmadiwale2397]

Where I can buy this awesome Truck???

[@jimmytvfclassic]

Awesome job! Nice!

[@bozidarskobalj3166]

How to buy mini rc volvo is it herpa?

[@kasky_RC_factory]

This is a herpa model converted to RC by me. This is not sold.

[@osmanpasha_diy]

Amazing! What size LEDs are these?

[@paulcabuche4503]

yo bro that's awsome

[@OXFORD486]

Would have been great to see the remote...

[@Sahadi420]

radio....... :)

[@arunaraghu4453]

@@Sahadi420 yaa , but it's also called remote btw

[@Sahadi420]

@@arunaraghu4453 Just sayin', if you call it "the radio", you sound like you know. It's like mechanics and "Motor" vs "engine". Common folk people call it an engine....while the guys that actually work on it call it a "motor". But yes, remote isn't "wrong".

[@arunaraghu4453]

@@Sahadi420 ya I completely agree , I just wanted to mention it to u :)

[@Rojal0110]

COOL AND AMZING

[@MIckveli2]

i sooo want one.!!!!!

[@officialrdtproject]

coba dijual di INDONESIA udah pasti saya beli

[@jasonsmithsrrcfun9259]

Do these come ready to run?? I really want some

[@gregghatfield9946]

So cool ,,, what’s the cost on one of these ??

[@kasky_RC_factory]

The cost of materials alone is about $ 300 or more.☝️

[@gregghatfield9946]

kasky :::: I love 1/10 scale R/C off road and I collect hot wheels . This is both worlds,, lol. So dang cool , I have around 1200. US dollars in one of my trucks so I know how the cost gets crazy. Thanks for sharing the info on this build , really awesome and amazing details 😎

[@kasky_RC_factory]

Thank you for your respect.😊👍

[@g_a_b_r_i_e_l_]

How?

[@vipboss82]

Can I please buy this ?

[@LaVeend7]

is this sold

[@Atlantic_Adventures]

man that thing is cool ,,,, I might have to look into one ! grate channel ,,, cheers !

[@kasky_RC_factory]

Thanks!😊👍

[@brickjju5732]

Like!!!!!

[@nettyvoyager6336]

Dimensions: 13 x 16 x 6mm HK-5320 Ultra-Micro Digital Servo do you want to go smaller :)

[@kasky_RC_factory]

I used HK-5320. Do you know a more smaller servo?Please paste the link of the product.

[@CustomCrawlerz]

This is nothing short of amazing... As are any of these "micro" RC vehicles... Where did you get the parts to make it if you don't mind telling us.. #customcrawlerz

[@kasky_RC_factory]

Parts used for these can be purchased below. www.sol-expert-group.de/1zu87modellbau:::48.html

[@edyhllykej3882]

I thought the 1:72 scale was intense but wtf nice dude . you’re crazy , the good kind of crazy ;)

[@kasky_RC_factory]

It is the best compliment. Thank you! 🤗 1/87 is a little smaller than that.☝️

[@gbenother8755]

How big mAh is battery? How much draws the electronics? How long run time?

[@kasky_RC_factory]

I do not know because the runtime has not tried, but since the battery is 180 mah, I think that it will run for more than 10 minutes.

[@ピロパピです]

こんにちは！最近すごく1：87トラックに興味がありましてどのように制作しているのか気になって、毎日何度も見ています。見ているとほっこりしますね。私も作ってみたいと思いパーツをドイツから注文しているところです。1円玉が見えたのでもしかして日本の方かと思いコメントさせて頂きました。 日本語で勉強できる所が無いので手探り状態ですがこのような動画があってすごくありがたいです。 製作途中、配線のつなぎ方など動画にして頂けたらすごくありがたいです。 また見せて貰いますね！

[@kasky_RC_factory]

こんにちは。見ていただきありがとうございます。 ツイッターで”kasky”名でミニカー関係のツイートしてますので絡んでください。いくらでも質問受け付けます。

[@tobeywins4531]

What kind of receiver did you use? is the receiver integrated in the center module you built into the chasis?

[@kasky_RC_factory]

Deltang Rx43d-1 is used for this truck. Yes, that is center module.

[@jasoncr87]

What are the trucks? matchbox, green light? greetings from Costa Rica

[@kasky_RC_factory]

It is based on a 1 / 87-sized precision model made by Herpa.

[@NomadicSociety]

the amount of time that you have invested would cause you to want probably $495, ;) so how far off am i???

[@kasky_RC_factory]

It's not that cheap. It is about over 400 dollars only for base track and parts cost. In addition, I spent about two months in production time and completed as a result of many trial and error. For example, I do not sell it even for 2000 dollars.😅

[@keun2009]

😍👏👏🇦🇷

[@billywhizz98]

Can you please tell me where I can purchase a complete kit of one of these models so I can put it together

[@kasky_RC_factory]

It is not sold.🙇🏻‍♂️

[@devenweeks2830]

Where could I get the truck?

[@danielemulazzi7309]

Wow... Stupendo... Sembra vero!!!

[@toyjacktoycar8471]

Oh~~ very nice bro!! 👍 You are the master of RC! Side under LED line is also very beautiful~ 😍

[@kasky_RC_factory]

Thank you😉👍

[@ROTAXD]

Impressive. How many hours do you have into building it ?

[@kasky_RC_factory]

I did not count hours it took, but since I gradually worked on holidays, it took about three months. My works very slow.😅

[@graysonkirkland6476]

I bet my drone can outrun it

[@atiradoreusoqueropegarosca3539]

Very good! 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@DiecastMadness]

I would so get lost in the tiny wires 😁

[@kasky_RC_factory]

I encountered the crisis several times.🤣😂

[@xtudogrow]

Congrats, u reach another level!

[@kasky_RC_factory]

Thank you☺️👍

[@floriankamleitner2990]

Grüss dich Von wo hast du die rundumleuchten ?

[@devrajsandhu1998]

How buy rc trucks plz

[@Greenmile-lw9il]

This truck is not suitable for any normal truck driver

[@kasky_RC_factory]

Because it ’s a toy🤪

[@trumpisacrybabydictatornar914]

Wow super cool 😎

[@tlahuicolexiii2844]

Do u build these and if u do how much would you charge me for one of these?

[@kasky_RC_factory]

Sorry. I can not make these for sale. I do not have time to make it, and it will be an astronomical price.🙇🏻‍♂️

[@tlahuicolexiii2844]

@@kasky_RC_factory Thank you for repliying anyways!.... & its a beautiful little truck!

[@kasky_RC_factory]

Thank you 😉👍

[@eisenschweinchen5354]

Wo bekommt man Warnlampen? Super Arbeit!

[@madegen171]

wow the impressive work i love to see it

[@yijungcruxcrux910]

Muy bien está el vídeo

[@ВасилийВасильев-н3г]

Hello! You have golden hands. I myself make models, but on a larger scale, and now my son watched your video and ..................... now I have to buy a microscope to make such models as You :))))))))). And the music is matched to your video is very suitable - the magic happens before our eyes !!! Excuse me for my English - I translated the computer (I hope that the computer translated correctly). By the way, what kind of music did you use in this video ????????.

[@kasky_RC_factory]

Thank you for watching. Please try by 1/87 size by all means. By the way, music is free to use anyone on youtube edit screen.

[@kasky_RC_factory]

Sorry, what I used for this movie is a free song that iMovie can use.

[@Makobaferias]

Nice job!!! Which leds did you use?

[@kasky_RC_factory]

0402LED will used.☝️

[@chimofficial1234]

Im need buy this

[@vladimirzebrovod9836]

Почти как "левша", блоху подковал

[@bobbiehighsmith4780]

That straight gangster👍👍👍👍

[@aa-yk2cz]

Very very very nice 👏👌👍

[@champarcadesminiatures4638]

With your channel we travel to worlds we thought were not exist. Excellent job. Thanks for sharing

[@kasky_RC_factory]

Thank you for your good comment😊👍 Please watch my other movies☝️I think that you will like other works as well.☝️

[@champarcadesminiatures4638]

I will see them 1 a day, to see for many days :) :) What servo you use for the steering wheel?

[@kasky_RC_factory]

Thank you for watching😊 Servo is this. It is a major servo in this industry. www.sol-expert-group.de/1zu87modellbau/Mikro-Servos/Mikro-Servo-S18JST-1-8-Gramm::851.html

[@champarcadesminiatures4638]

Ιt honors you so much that you give the information that people ask for. Respect... and thank you :)

[@kasky_RC_factory]

Thank you 😊 If you could enjoy seeing my work, it is happy for me.👍

[@emiliomaraganas]

Wow. Speechless here..

[@keithfoster6000]

Now you show the indicators working at the front why

[@kasky_RC_factory]

What do you mean? What is the front indicator?

[@ЙерихонСгрнапупугандитити]

amazing!

[@brapppstar2314]

where did you buy gearbox sir? thanks.

[@kasky_RC_factory]

You can buy it from sol expert.

[@azizgaming9812]

how much it costs

[@matchewbacca]

Bad ass bro fairplay

[@JimBiddle.]

Can you do a picture of the truck next to the controller?

[@kasky_RC_factory]

Take picture a truck and propo together?

[@simonkonigs5894]

Geiler LKW, sieht echt gut aus.

[@kemannkemann203]

Take it to miwula

[@koen-peeters80]

super nice , whats the total cost and time to build ?

[@kasky_RC_factory]

Approximately 300 dollars for parts except base tracks. It took about three months because I gradually advanced on the day off.😉

[@robertopiunti10]

E veramente fantastico complimenti

[@ramziramli2783]

excellent works sir..what type of circuit board do u use?or did u customized it all by your self or its from the donor from other rc model?

[@kasky_RC_factory]

Thank you for watching! The circuit board is Deltang's Rx43d-1.

[@ramziramli2783]

@@kasky_RC_factory thanks for helping..really interesting project..wish u all the best..

[@화엄신장아수라왕]

Your crazy.!!

[@---px6oj]

"der ist ja irre" ey was ein krasses Mini Bauwerk! RESPEKT

[@kasky_RC_factory]

Thanks☺️👍

[@BBoHK]

Impressive! Excellence work!