this video is good and you are explaining in good way. Thank you very much
@jaylton_alencar2 жыл бұрын
Great video
@nandlalchoudhary25794 жыл бұрын
sir which programming language are you using weather it c,c++ or any other
@INVOOTECH4 жыл бұрын
It's in c language
@nandlalchoudhary25794 жыл бұрын
Can I use c++,Java, python any of this
@rochdimaria2 жыл бұрын
Hello sir how you chose or calculate the capacitance values ?
@INVOOTECH2 жыл бұрын
A crystal’s frequency is specified for load capacitance CL. If the actual capacitance is too high, the crystal will oscillate more slowly. If the capacitance is too low, it will oscillate faster. Note that while crystal datasheets specify frequency variation as 1) initial accuracy, 2) stability (primarily across temperature) and 3) aging, none of these account for frequency variation caused by incorrect load capacitance on the board. If alternate crystals are specified for a board, all alternates should have the same CL spec. The following equation shows the relationship between the board capacitors C1 and C2, and the CL spec of the crystal. CL = (C1 * C2) / (C1 + C2) + Cstray Stray capacitance Cstray comes from the pins of the chip and parasitics from the board. It is often approximated as 5pF. Assuming the same value is used for C1 and C2, the equation can be rewritten as: C1 = C2 = 2 * (CL - Cstray) Here C1 and C2 Are connected to Crystal Oscillator
@rochdimaria2 жыл бұрын
@@INVOOTECH thank you so much
@ayah36722 жыл бұрын
best explanation ever!!!
@ravina053 жыл бұрын
Why to add crystal oscillator externally?
@INVOOTECH3 жыл бұрын
internal oscillator do not provide that precision and so adding an external oscillator is always advisable. You can read more details for the internal oscillator on the ic datasheet.
@kamaleshand64593 жыл бұрын
very helpful video
@josealfredo62873 жыл бұрын
Is the same connection with the pic 16f84a?
@kunalsirpor673 жыл бұрын
Thanks man, you solved my assignment.
@farahsyafiqa82863 жыл бұрын
Hello can u give me your assignment? Help me 🥺
@shaheryarmehmood99583 жыл бұрын
superb
@INVOOTECH3 жыл бұрын
Thank you! Cheers!
@wakbekabale98032 жыл бұрын
can we use on vs code please
@medilyesoudhini74114 жыл бұрын
you are a life saver thanks
@orimusic97073 жыл бұрын
great video
@le_dr36773 жыл бұрын
well explained bravo
@mrsteve75212 жыл бұрын
Thank you a lot 👏
@asanhikmat18552 жыл бұрын
please more video on this pic 16f877a project
@subhashedna20113 жыл бұрын
Kindly send me the link for Proteus software and code software
@nurha50003 жыл бұрын
how to run coding in mplab from micro C??
@farahsyafiqa82863 жыл бұрын
My led not on . I dont know why .. help
@Maham8993 жыл бұрын
Thanks a lot
@Hhhhhhhhhhh61154 жыл бұрын
void main(){ trisb=0x00; trisa=0xFF; while(1){ if(porta.f0==1){ portb.f0=1; delay_ms(2000); portb.f0=0; portb.f1=1; } } } Q:I want to stop portb.f0 competely after 2 seconds although the switch on .How? Thank you