#1 Say NO to ARDUINO! New ARM Microcontroller Programming and Circuit Building Series

Get ready for a new series on the ARM Microcontroller. This time, I will be using my new ARM Microcontroller book (amzn.to/32ocUlM) as I create new videos while creating various projects.
Purchase my new book: Arm Microcontroller Programming and Circuit Building Volume 1
www.amazon.com/dp-B09PHBT859/...
I recommend using the STM32CubeIDE:
www.st.com/en/development-too...
Recommended servos:
Futuba hobby servo: amzn.to/2xolCzS
High torque metal gear hobby servo: amzn.to/2ktkHbc
HiTec hobby servo: amzn.to/2ksycrv
High precision, high torque metal gear hobby servo: amzn.to/2fRE0Wv
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): amzn.to/2ruFnSn
The drafting pencil I use on these videos: amzn.to/2qioYg2
The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: amzn.to/2qicUez
4561737465722045676720496e736964652e20436f6c6c656374207468656d20616c6c2e20476976656177617920736f6f6e21

[@MrController64]

You are great Patrick, I started learning ARM with your arm tutorials series 6~7 years ago, now i'm working in an mcu developing company, thanks alot ♥

[@PatrickHoodDaniel]

Wow, that is great to hear. Congrats on making you dream come true!

[@AshishEmbedd]

i started my embedded journey with your Avr videos now i am working in Automotive domain with tricore CPU's, thanks alot , its good to see youtube recommended me this video.

[@PatrickHoodDaniel]

I am happy to know that it was recommended as well. Very cool.

[@paulmcgreen]

Could you tell more about your career/education path? I want to start teaching kids and want to begin with Arduino, so I want to briefly describe them the whole picture including the career aspect

[@saranyas6280]

Hi are u electronics engineer

[@gerarddonnelly5092]

I started my firmware career following your videos, very clearly and easily explained. I've just ordered the book and looking forward to the series. Best of luck with it.

[@PatrickHoodDaniel]

Thank you so much for getting the book. I hope it will serve you well.

[@mohamedelgamal6333]

Despite that, I am a civil engineer but I found it so easy and exciting to follow in these episodes. I did a number of projects using Arduino to use some water-related applications sensors. Thanks for your efforts, highly appreciated.

[@PatrickHoodDaniel]

You're welcome!!

[@priyanshusrivastava9288]

Patrick, you are insane. Started my embedded journey from your videos. Love it, more power to you!

[@PatrickHoodDaniel]

Thank you so much!!!

[@rubikon7648]

Very nice and clear explanantion, I am a military officer with the captain rank but i like learn more and deep about mcus, especially arm mcus, thank you.

[@adammontgomery7980]

I'm so excited! I haven't found anyone else who dives into the datasheets like you do.

[@PatrickHoodDaniel]

Nice. Get ready for some more.

[@erikvincent5846]

I started on your AVR tutorials in AVR Studio and now I work on Linux embedded systems. Thanks for your channel and glad you are getting back into it.

[@PatrickHoodDaniel]

You are so very welcome!! This is a passion of mine and I will keep going until I die! you make great videos as well. I just subscribed.

[@heliquackterstudios]

This is brilliant work! Glad to see people taking it beyond the dev boards and truly building what they need - Now to find someone that can do a series like this but for microprocessors/SoC's

[@user-mp9um5qj3u]

For me learning and doing microcontrollers is fun because I learn about how hardware and software interact with each other and how we can control hardware with software.

[@IFoundMyUsername]

Happy to see you coming with fresh content. Looking forward to your lessons

[@PatrickHoodDaniel]

Thanks!

[@yenespace406]

You are a gem! You just answered my question First time seeing you and subscribed already! I have a product in mind that others have already built but I have far more greater marketing strategy and I just know how to sell it. Also there are few common factors that others out there missed. And I was just about to start doing it using Arduino, but turns out Arduino will be just useful as prototype phase (in my case) So i clearly need your channel! Glad I found you! All the way up from Ethiopia, Africa.

[@nazatkabir3442]

this man is a legend. he started making tutorials on avr when there was no tutorial on it.

[@PatrickHoodDaniel]

Thanks. Yes, it was a while ago! This will eventually show my age.

[@databang]

I look forward to the next video, thanks for sharing.

[@hallkbrdz]

Agreed. I love using NXP Arm Cortex-M7 MCUs for my projects. Very efficient and flexible platform.

[@tewodrosgirma3019]

Thanks for sharing your knowledge. You always create excellent videos.

[@calebhufstedler9040]

Just bought the book, I'm excited to start this course, this is exactly what I've been searching for!

[@PatrickHoodDaniel]

Hope you enjoy it!

[@cncmoh]

You're an excellent teacher. I learned to build my first CNC from your videos. I'm working on my second cnc machine with Pokeys57cnc following your videos once again.

[@PatrickHoodDaniel]

Enjoy the process!

[@SeniorAsJunior]

I liked that in my search for ARM MCUs your videos appeared and I was preparing for when I received my development board that I had bought and now I decided to get your book in epub format. Congratulations on your work and thank you very much for sharing your knowledge. :-)

[@PatrickHoodDaniel]

My pleasure.

[@user-nk6gp1wu6b]

​@PatrickHoodDaniel : Just bought your book, it will be a very interesting journey. 😊

[@andrewbarbour7475]

Can't wait to get started! I found a box of 20 of the M501 V04s at an electronics recycler and have no idea what to do with them!

[@IncognitaLabs]

I predict this will be well-received! You do a very fine job of explaining complex ideas in as simple a way as possible.

[@PatrickHoodDaniel]

Thanks. I will strive to do the same.

[@shivakumar-lv6wr]

I will watch this series!! Your series on stm32 was amazing!!

[@PatrickHoodDaniel]

Thanks!!

[@blockhunterlp8748]

Best microntroller videos on youtube. Thank you for explaining everything from scratch. Dont know how you wanna improve these perfect arm series haha

[@PatrickHoodDaniel]

Creating a near impossible application will hopefully show a lot more useful information..I plan to really flesh out state machine code and using interrupts extensively..

[@LovelyClock-kf4lc]

I just started doing electronic as hobby recently. Just found out your channel. Your explanation is so good and easy to understand. I wish i know a place to hang with people with same hobby

[@PatrickHoodDaniel]

Hang with me. I am starting a new series.

[@nolimangulabnan6101]

Big thanks Patrick. Learned a lot from your channel

[@philipacovington]

Wow, it's hard to find the STM32F030 right now. Zero stock and factory lead times of 53 weeks! I will be following your new series!

[@PatrickHoodDaniel]

You can use any of the STM32 line. The chip I use is one of the simple ones, so pick any and it will be fine as long as the number of pins will work with your prototyping setup.

[@Fnta_discovery]

You explained very well. I love it

[@muhammadqaisarali]

Well, I used to watch the videos of this channel 6 years back, the series was "AVR atmega32 programing". At thet time you didn't appeared in the videos. Today I found this video, after few seconds I started thinking that I have had heard this voice. I have learned from your videos. Hopefully will learn from these as well. Thank you.

[@PatrickHoodDaniel]

My pleasure! Enjoy the series.

[@marinehm]

Subbed. I stumbled upon this video, somewhat like I did with Arduino some 6-8 years ago. Looking forward to viewing your Playlist.

[@lohikarhu734]

hi Patrick; i remember learning the real "metal" of what "software" really is...we used a PDP-11/05 manual and did cycle by cycle, bit by bit, analysis of memory cycles, instruction fetches, instruction decoding (you know, the bits that control ALU Functions, indexed addressing...), and i suddenly 'got it'! Software is just reconfiguring hardware, cycle by cycle, "steering" addresses and data.., it was a real "moment", since i had been developing digital logic for about 7 years, at that poimt, and suddenly "connected" the software/hardware worlds! best o' luck with books and tutorials!

[@PatrickHoodDaniel]

Nice story. Thanks!

[@khomo12]

Thank you! I'm looking to start with both the arduino and something more used for production.

[@rihebsassi8466]

I'm so excited Patrick, I can't wait 🤩🤩

[@giannisloukovitis1256]

YES! FUCK YES! You're back ❤️ I can't wait! I wish you all the best with the books and the series

[@PatrickHoodDaniel]

Thank you so much. I am very happy that you and others are still here!!

[@Lwyte17]

Bought the book and hopefully the hardware soon. I look forward to learning along with this series, thanks for giving us your knowledge!

[@PatrickHoodDaniel]

Thanks! Interrupts will be the next video.

[@PatrickHoodDaniel]

I am super excited for this new series. I really hope you all get as much excitement as I will throughout this series. I will be covering all of the really cool features of this ARM microcontroller through a build process of a very complex robot that I have been wanting to create for a long time! It is an impossible project and I will probably experience constant failure, but I think that will be the fun part. 48696e74

[@onurolce]

I've learned many things in your Atmel AVR videos. I hope this ARM series will be effective same level to me. Do you plan to use HAL library ?

[@PatrickHoodDaniel]

@@onurolce I will use the HAL library, as well as the IOC where the STM32CUBE generates the initialization code, and use the code that you ave seen me use before. I will also show all of these variations initially and talk about the comparison. I personally like to delve in deep to understand what is going on at a low level, but I am interested in knowing what my viewers like as well.

[@onurolce]

@@PatrickHoodDaniel very good, thank you :)

[@mostafagaberahmed6657]

welcome back my teacher . i hope this videos to be most viewed on KZbin . lets get started

[@kayakMike1000]

@@onurolce i have written some init code for a few cortex-m cores in NXP "LPC" and atmels "SAMD" line up. Its not hard, BUT it is tedious. its a lot of loading the right value in the right memory location. If there is a tool to ease the tedium, i would recommend it.

[@jackle3002]

Subscribed! Youve got me excited! ARM is the future!

[@PatrickHoodDaniel]

Excellent! Hope you enjoy!

[@setter3329]

Just ordered book,looking forward to the journey

[@PatrickHoodDaniel]

Thank you!!

[@yaghiyahbrenner8902]

wow - its so nice seeing you again, you've been missed!

[@PatrickHoodDaniel]

Thank you so much!

[@omerfarukkarabostan2081]

just the video series i need. I'm looking forward to it

[@PatrickHoodDaniel]

Enjoy!!

[@movocode]

God level explanation. Subscribed within first few seconds.

[@PatrickHoodDaniel]

Thank you so much!! I have a lot of stuff planned for the microcontroller series!

[@jithin_isaac]

Waiting eaglerly for the course! best of wishes..

[@PatrickHoodDaniel]

Thanks!

[@thepainfultruthoftheworld6751]

I don't know how i look at you your really make my walk easy any i don't even know how i get see you as my i brother, i really appreciate you dear brother and i hope i will learn from you more through my career.🙂😊

[@shrijithmjain2137]

I always Like your videos first and then watch them.

[@PatrickHoodDaniel]

Ha! That's awesome. I hope to always be worthy of your likes.

[@TheCzaach]

Whoa! I remember some of your tutorials - they were great!!

[@PatrickHoodDaniel]

Thanks!!

[@markday3145]

With STM32, you can get Arduino-like development boards. Some (like ST's Nucleo-64 boards) have Arduino-compatible headers. And the Arduino framework has good support for STM32. Hobbyists can use them for better performance and better functionality. You can experiment and prototype with the development boards (including Arduino, which has drivers for lots of peripherals), and then design and build a custom board once you've settled enough of the details.

[@PatrickHoodDaniel]

Thnaks for the information.

[@zz4157]

Just bought the book too. Would you recommend the stm32 nucleo board of discovery board? Thank you very much

[@manofmesopotamia7602]

Yes, I have been waiting for this series 😊

[@PatrickHoodDaniel]

Excellent.

[@urielmanup]

Man i love you!. the Atmel series, is the best i ever did!

[@PatrickHoodDaniel]

Thanks. I hope you check out this series as well.

[@lightning_sree2531]

waiting for your video !!

[@kryptocat4240]

You'r really doing a great job

[@PatrickHoodDaniel]

Thank you!!

[@curioseddy]

Electronics engineering and I am here to learn about this amazing microchip. New sub.

[@abdulmajith8662]

Thank you so much, really interesting

[@digitalzoul57]

You are my hero. I learned a lot from you

[@sinazamani7077]

very amazing video thank you so much

[@MichaelOReilly01]

Can't wait! literally just bought the book from Amazon Germany 🙂.

[@PatrickHoodDaniel]

Wow!! Thank you!! Enjoy the book.

[@serg.r4860]

Nice, I bought your book off Amazon. I been reading it after work.

[@user-gr4my3kn1h]

Cool video. I learned programming and this seems like a really cool next step. always loves embedded systems.

[@PatrickHoodDaniel]

Thanks. Enjoy the journey!!

[@sanjaybhatikar]

Sounds awesome 👏

[@PatrickHoodDaniel]

Thanks!!

[@rampr4225]

Excellent 👌👍

[@akhilsankar1999]

Hi Patrick, your deep dive approach to explaining uC theory in a practical context has been an absolute gamechanger! As a mechanical engineer with a minimal digital electronics background, I want to thank you for sharing your knowledge on this forum and making this subject accessible to all of us! One question: Do you have any suggestions on how to learn ( or do you have plans to do some walkthroughs :) ) about how device drivers are written? I am personally interested to learn more about how to interface with the MPU6050 but find it to be a relatively complex component to wrap my head around. Thanks and looking forward to checking out the book!

[@PatrickHoodDaniel]

Thanks for the kind words. The MPU6050 should not pose a problem for you since it uses the i2c (I squared C) protocol. I explained that in my previous ARM series, and I detailed how I2C works. You should take a look at those videos. I will go back through I2C in this new series, but it may be a little while before I get to it. Here is the first I2 video from that series #57: kzbin.info/www/bejne/joSVXmxmfq9qocU. The others are numbered 58, 59, and 60

[@akhilsankar1999]

@@PatrickHoodDaniel great, I'll start with those in that case. thanks!

[@piuniverse9306]

First time in a long time since I watched a video that made scene. THANKS

[@PatrickHoodDaniel]

Much appreciated. I have many more coming.

[@variogenesis]

Stm32 is the choice for many people lately. Patrick I wish the best to the new series...i m sure it gonna be exciting as the old ones.

[@PatrickHoodDaniel]

Thanks!

[@systemachic]

Works good, tnx

[@bendustin7609]

Thank you sooo much!

[@old-gamer-01]

Vey very good content! Keep doing content like this. ❤❤❤

[@PatrickHoodDaniel]

Thank you so much!

[@eis3nheim]

Can't wait to learn from the best.

[@PatrickHoodDaniel]

Awesome. I am grateful. Thanks

[@Italya3343]

Many thanks for sharing your amazing 👏 Could you plz share with us Full Roadmap 2022 of how to become Micro expert & technical skills

[@PatrickHoodDaniel]

I will add this to the stuff I will talk about in the videos. I plan to include all of the technical skills you will need in these videos.

[@ric2play]

U da Man!! I was just thinking you should update your courses!!! Keep on working on the other volumes.

[@PatrickHoodDaniel]

Will do! Thanks!

[@schlaus_kwab]

thank you for the vid! Awesome!

[@PatrickHoodDaniel]

You're welcome!

[@SebastianGarcia-go4tx]

Purchased your book and liked it. When does volume 2 come out ?

[@andrewandrosow4797]

I said NO to AVR 8 years ago. Then I tried to realize a frequency meter with 1Hz resolution up to 10MHz. These AVR chip hasn't 32bit hardware timer - so it was very problematic to realize such an equipment)). I tried to use assembler, but I had not had any success. In addition, prices on STM32 chips were very attractive. There was 32bit CPU, 16kBytes of RAM, 32-bit timer, DMA !. But it was really difficult to understand how to program stm32 - a documentation has more than 1000 pages. There are several clock buses. I can compare STM32 with 80486 motherboard (without video card surely). But there you can be running digital signal processing in real time (in speech band up to 4kHz) and realize digital filters.

[@Bianchi77]

Nice video, thanks :)

[@kasiselvamk]

Hello Patrick, your videos are grate and more useful for ppl who want's true knowledge of micro-controller programming from L0 level. grate job 👍. i have one query, Can we use one programming device to program any CORTEX MCU's from different manufacturer's;As programming protocol are the same. for a instance , Pickit 4 supports CORTEX SWD protocol , So can i use same for STM32 programming ? & vice versa ?

[@konturgestalter]

love it! would you be so kind making the ebook available on Amazon Germany too?

[@PatrickHoodDaniel]

It's there. Just hard to find for some reason: www.amazon.de/-/en/Sergio-Gutierrez/dp/B09PHBT859

[@mytube1000javed]

Thanks for such fantastic video. I need a mcu with wifi. To develop wearable device which is connected to an app on mobile. Which one should I choose?

[@aashutoshswami]

Hello. I loved your series and the book. When is the second volume being released ? I am looking forward to it

[@PatrickHoodDaniel]

Soon. Can't give an actual date. I will make an announcement on this channel.

[@nelsonsosa8797]

​@@PatrickHoodDanielMaster soy nuevo con ARM , puedo comenzar de frente con tu nuevo libro que lanzaras o me recomiendas trabajar primero con el libro que lanzastes hace un par de años?

[@PatrickHoodDaniel]

@@nelsonsosa8797 El volumen 1 será el mejor libro para comenzar, ya que el volumen 2 tendrá temas más avanzados que requerirán el volumen 1 como requisito previo.

[@peter6098]

Do you recommend to learn assembly as well, as programming language? I really wait your further tutorials, and my philosophy is the same to learn as you told in your two introduction videos. For me a bit new the STM32, as earlier, I learned on TI Stellaris.

[@PatrickHoodDaniel]

No, unless you wish to torture yourself. C++ compiles quite well into efficient machine code so there really isn't any reason to use assembly unless there is an optimization that is absolutely required by the application/use of the microcontroller. Before assembly is used, it is always a good idea to find a more efficient C++ or C version first as the number of instructions required for the task may not be appreciably improved.

[@2fourk349]

I've gone a few episodes deep, I was looking at microprocessors, having built my was through an a Adreno learning kit. This series just helped demystify everything. I tried to buy book on kindle in Australia, didn't work. I'll try again, I'm dyslexic, so getting kindle version I can use text to speech.

[@PatrickHoodDaniel]

I don't see why not. I do recommend getting the physical book though. These technical books don't show the diagrams, figures, and code very well.

[@Cryogenics12]

@BuildYourCNC Which kit should I buy for parts needed to complete this book? I bought the book and I'm pumped to start. A centralized list of parts and tools would be greatly appreciated. Will I need my own oscilloscope? Multimeter?

[@PatrickHoodDaniel]

The intermediate kit should be sufficient; however, in my volume II, coming out later this year, will include all of the parts in the advanced kit.

[@Melvs_Cuts]

Waiting for Volume 2 of this book . When is it coming out Sir ?.

[@imlassuom]

I think I'm lucky!! I was thinking its time to switch to RISCV or ARM ... Can't wait... BTW I started AVR from your video its a great memories to remember...

[@PatrickHoodDaniel]

Awesome. the AVR series is a great primer on this series.

[@davidandrews8566]

Hello, just bought the book. Will there be a kit of parts available? And if so will I be able obtain it here in the UK?

[@PatrickHoodDaniel]

Newbiehack com. My next video explains this in more detail. Thanks!!

[@glewiss6696]

Great projet ! I bought your book. Do you mind asking why not using vscode for the editors which tend to be the most common used IDE nowdays and the bluepill which is a well known board used as well with arduino ?

[@PatrickHoodDaniel]

After what happened to CoIDE back a few years ago with the lack of support, I want to use a development platform that will be supported indefinitely. As this IDE STM32CubeIDE is supported by the chipmaker. The use of VSCode does intrigue me, so I will look into it.

[@glewiss6696]

@@PatrickHoodDaniel Ok thanks I understand. What about the bluepill that many people use with arduino programme? Maybe later on. Anyway It'll be really interesting with the F0.

[@wristocrat]

Completely assured on ARM mcu now! Lovely series

[@PatrickHoodDaniel]

Excellent!!

[@nikhuge6580]

Keep it up sir…

[@Bob-be2pj]

I hope you address extending battery life including going into and out of deep sleep modes. This has caused me problem using the Arduino , Pi Pico and Seeduino boards.

[@PatrickHoodDaniel]

I will keep this in mind when I get to using batteries. Thanks.

[@mic03311]

Just ordered your book. Can't wait to get started. If you can make a mix of programming and PCB design with MCU, this channel will become a reference! Keep up the great work!

[@mic03311]

Are you recommending any devboard or specific hardware to follow along?

[@mic03311]

Sorry for the many questions. I see you use a custom PCB for the MCU - is the Gerber file available freely or you are going to explain the PCB design, I understand it is just a basic PCB. Thanks

[@PatrickHoodDaniel]

@@mic03311 Yes, I will go over that in my next video. There will be a few options, but mainly a PCB to breakout the chip. Stay tuned.

[@PatrickHoodDaniel]

@@mic03311 I will explain the PCB and there are cheap versions on the internet, and the one that I sell. I will add the gerber file to the website if anyone is interested.

[@mic03311]

Thanks, looking forward 👍

[@adnansayder2148]

Hi dear thanks for every lessons ı tired to learn hall library and stm32cube ide from st channel but speaker was spekaing German accent it was very bad ı didnt understand then ı began mikroc arm what do u think about mikroc ?

[@d.jensen5153]

I love ARM microcontrollers but I'm no fan of ARM IDEs. The Arduino IDE has shown me that I don't need Keil, IAR, or any of the Eclipse derivatives. To me they are all unnecessarily big and full of extraneous complexity. Thankfully the Arduino IDE can accommodate just about anything...from M0 to Teensy 4.

[@tdab1234]

We all would want that but in reality Arduino is not really used in the real world but only used in learning basic programming

[@d.jensen5153]

@@tdab1234 Why? I've used both Keil and IAR professionally...because the engineering manager specified them. But there isn't a line of code I wrote that couldn't have been written and compiled in Arduino. (Goes without saying I would NEVER use an instruction like DigitalWrite(). That really and truly is for noobs. But Arduino in no way forces its usage.)

[@G-Code_official]

@@d.jensen5153 can you please tell me why digitalWrite is for noobs?

[@d.jensen5153]

@@G-Code_official I was wrong. No doubt there are applications where squandering a few hundred microseconds on the transition of an output pin is not a problem. But I have no use for that nonsense. I'll track my own use of resources and their dependencies, thank you.

[@xxbatman69xx98]

@@d.jensen5153 Hey not sure if you will see this but when you use microcontrollers in industry, do you design a circuit board around a mcu? Or do you use a board with a mcu on it like a NUCLEO board?

[@diana_dev]

Dear Patrick, do you plan to publish Volume 2 of your book? This book is amazing source for learning stm32 from scratch! I'm waiting for second part 🙏

[@PatrickHoodDaniel]

Hi Diana, Yes, I am currently writing the book. It takes a little while as I need to also have technical editors included. I will inform you of the book publishing date when I get near to the end of the writing.

[@diana_dev]

@@PatrickHoodDaniel Thank you! ✨

[@PatrickHoodDaniel]

@@diana_dev I watched your shorts showing some of the project in the book. Awesome!!

[@diana_dev]

@@PatrickHoodDaniel Thank you so much. It’s all thanks to you, your book and your cool channel 😊 I very much appreciate your work. To keep up with my progress and to not give up - I try to do shorts of my results. And it helps to refresh in memory of what I've already learned if I pause studying 😁

[@PatrickHoodDaniel]

@@diana_dev That is a wonderfull method. I will be watching!

[@gilbertowatanabe9149]

Hello! Are you going to teach someday a graphical user interface project on a touch screen panel using, for example, QT for MCUs?

[@PatrickHoodDaniel]

This tutorial series is more focused on the fundamentals of microcontrollers where the users of the series can build up the knowledge to create systems like QT. My personal goal with this series is to create a robotic system that will demonstrate all of the features of microcontrollers. I will get into modern concepts of state machines and machine learning (a subject I have been researching since 2007).

[@alexyoung6418]

I started using the AVR as early as Atmel started transitioning from the MCS-51 family, which I was using before that point. I was on assembly so it was a bit harder for me to switch over. No worries, I've been using STM32 for over a decade, using C of course. The major drawback with the AVR isn't just in the price and resources, it's also STUPID SLOW! 20 years ago a 16MHz system clock was sweet, but it was an 8-bit architecture. Now the STM32 comes with 4x the core bandwidth, easily reaching 72MHz system frequency, with the F4 and H7 series I've been using, they are running at 180MHz and 480MHz respectively. I guess that's why people started trying to run the Arduino framework on the STM32 or various Pi baords. Redesigning PCB is fine, you can shed enough parts to make an Ardnuino more compact. Yet still, I never got used to using that system. Never tested it with any benchmark tools either, but I generally don't trust it with efficiency.

[@PatrickHoodDaniel]

Well said.

[@saranyas6280]

Are u electronics engineer?? Alex

[@alexyoung6418]

@@saranyas6280 Yup, plus mechanics.

[@PatrickHoodDaniel]

@@saranyas6280 No.Learned everything from various sources and University, but I am not specifically an electronics engineer.

[@huseyinyurdakul5226]

When will the new video come :)) We are excited!

[@PatrickHoodDaniel]

I am planning to make these videos available weekly as a maximum duration as a worst case. I have been wanting to spend more time on making these videos so I can transition more into ARM microcontrollers and robotics and less with CNC since robotics is my chief interest and always has been. Thanks for the excitement!

[@Trainntravel]

will touching the pins with bare hands damage the microcontroller? does the stm32 chip have ESD protection

[@takedowntheccp.5167]

hope there chinese version, we are easy learn. thanks!

[@sukmaadhiw9033]

I can't agree with the price point, at least in my region, a single STM32 chip could cost around $5 - $10 while an ESP32 costs just $2, ESP01/8266 cost almost $1, and an Atmel chip costs $2. I think what makes STM32 great is it's reliability, flexibility, and quality makes it really the default option for industrial application. Though ESP32s are close to compare to STM32, i think STM32s had certain qualities that ESP32 don't have, such as flexibility and features (interrupts).

[@PatrickHoodDaniel]

At low quantites, yes the chip is more expensive, but my series focuses on getting to a production level and at high quantities, the chip is very cheap.

[@sukmaadhiw9033]

@@PatrickHoodDaniel Ahh I never knew that they're cheaper in bulk! I thought they were just fancy chips 😁. Now you got me wanting to learn more on STM32! thank you so much!

[@PatrickHoodDaniel]

@@sukmaadhiw9033 Not a problem. Thank you for watching!

[@agelosouzounis3829]

When are you going to edit the 2nd arm book ?

[@peterdavila3045]

Excellent. I'm looking forward to this series. Subscribed. Question: I have been using VS Code with Arduino. I have also started using the PlatformIO with VS Code. Is your book and series independent of the development platform or is this series very tightly tied to Eclipse?

[@peterdavila3045]

I got your book. Let the games begin. 👍

[@PatrickHoodDaniel]

Hey Peter. No, this series is not dependent on a particular development platform. I am using the ST modified Eclipse environment (STM32CubeIDE) which integrates CubeMX. Fortunately, the CubeMX can be set up to create autogenerated code for any environment. the CubeMX can also create schematic, footprint, and 3D part models for any electronics CAD software, like KiCAD, Altium, Eagle, etc.

[@peterdavila3045]

@@PatrickHoodDaniel Excellent. I'll research how others are using the PlatformIO with STM32 processors. I'll then select an appropriate STM32 and set myself up with the appropriate development hardware. I'll reach out to you to purchase your breakout boards for whatever STM32 I buy. Thanks for the great effort in putting these videos together. They're priceless.

[@PatrickHoodDaniel]

@@peterdavila3045 Thank you so much. I hope you enjoy the process as much as I do.

[@peterdavila3045]

@@PatrickHoodDaniel Hi Patrick, I just ordered you "ARM Microcontroller Advanced Kit" from your website. But, I don't know if I'll be able to use PlatformIO with VS Code to work with it. Do you know which one board gets selected in PlatformIO to interface to your setup? If you know, it will save me some time having to dig for it. In addition, I'll be looking to buy a Nucleo board or similar to expedite some of my prototyping and for use with PlatformIO. But then, I plan to be transferring the appropriate final design to your setup for final testing prior to PC Board. I'll use the ST development tools if I have to, in case PlatformIO does not recognize the minimal STM32 chip setup in your kit. I guess I would then transfer the C++ code from PlatformIO to the Eclipse setup for final testing with your hardware setup. Thanks for all your effort to provide quality instructional material. Much appreciated.

[@Lee-gr2sd]

What about the ARM9, any good for a GPS device?

[@SomphongThanok]

How to find your book from shop?

[@mohammaddehghan8762]

Great Does your training explain everything in your book?

[@PatrickHoodDaniel]

No, I will be using the book as a reference when needed. The book details many of the simple methods like basic input and output, using the ADC, basic circuit use and interrupts. I may explain the use of these features, but not in a scaffolding approach. In this series, I will focus on more advanced topic, but still explain them so anybody will be able to learn.

[@mohammaddehghan8762]

@@PatrickHoodDaniel thank you . How many training videos do you upload each week?

[@PatrickHoodDaniel]

@@mohammaddehghan8762 So far, one per week but I will be increasing the frequency when I finish some of the machines that I need to deliver to customers.