Good-looking truck I have two v8 s10's got a 94 ss s10 with 383 in it. The second one has 427ci SBC procharged.
@boostedS107 ай бұрын
Thanks man, and hell that’s badass! A lot bigger then my motor for sure 😂
@jordon7562 жыл бұрын
Beautiful clean s10 man, can't wait to start my s10 project soon.
@boostedS102 жыл бұрын
Thanks! And hell yea !
@kaedyncopper128 ай бұрын
Sweet little S10,thanks 4 the breakdown of what and all is done.
@boostedS108 ай бұрын
No problem, I need to do a updated one soon now that it’s on methanol
@vrg69 Жыл бұрын
Badass truck looking forward to more content
@boostedS10 Жыл бұрын
Thanks man, trying to keep them going, unfortunately waiting on transmission
@luiscarrasquillo9743 Жыл бұрын
That truck looks pretty nice
@boostedS10 Жыл бұрын
Thank you! A lot of time put into getting it how I want it to look, not done yet either
@jasonburke3064 Жыл бұрын
Nice piece. I love that grill. And it’s color matched.
@boostedS10 Жыл бұрын
Thanks man
@heshtesh Жыл бұрын
Very nice truck, your radiator looks like it started off as an oil cooler for an industrial compressor, a friend built ( modified) a core and built me the same radiator with the wide cross flow tubes. Mine was built by API Air Tech in Arcade NY. Unfortunately it's to big to fit into my 94 Sonoma where it would be welcomed on my street/strip truck.
@boostedS10 Жыл бұрын
That’s interesting, I would have never thought of that
@zyairrdev2 жыл бұрын
Saw yall at the test and tuning in sunday. God damn that car was fast.
@boostedS102 жыл бұрын
Thanks! Yea finally startin to figure some Stuff out on it, still got more left in it we slowly creep up in the power
@GabeRyanMedia5 ай бұрын
Sweet truck. Good vid. You've got my sub! 👍🏻 Lots of good inspiration for my '88 S10.
@boostedS105 ай бұрын
Hell yea glad I can help with that💪🏽 and thanks for the sub!
@robertburton295 Жыл бұрын
Nice truck brother!!
@boostedS10 Жыл бұрын
Thank you sir
@VON92 Жыл бұрын
Nice S10 this is my dream truck to build
@boostedS10 Жыл бұрын
Go for it man, get you one and slowly start doing it one day!
@VON92 Жыл бұрын
I just finished putting a 5.3 in a 98 shortbed sierra it's in the tune shop now so once I'm completely done with it I'm getting me a S10
@VON92 Жыл бұрын
My cousin texted me this morning asking me did I want to buy his 85 S10 for 500. I'm getting it this weekend and letting it sit up until I'm ready to build it
@boostedS10 Жыл бұрын
Hell yea man!!
@jensentang6414 Жыл бұрын
Nice video sir,that will help a lot with my build
@boostedS10 Жыл бұрын
Glad it helped you out!
@heshtesh Жыл бұрын
I like where you get to keep your power brakes, I ended up going with Strange Engineering manual master cylinder, due to spread port heads on my 1st gen I was limited to 2" primary tube fenderwell or build my own (no thanks) and left no room full brake package.
@boostedS10 Жыл бұрын
I plan on changing that out soon, my brakes have so much drag on them idk what els could be the issue, caliper is centered on the rotors so it’s not that but the wheels barley make 1 rotation if you spin it.
@heshtesh Жыл бұрын
@@boostedS10 Could your proportioning valve be an issue by maybe not fully releasing line pressure?
@boostedS10 Жыл бұрын
I have to look back and see, I don’t even remember if it has one in line or not lol
@boostedS10 Жыл бұрын
Good catch though
@carldillow3500 Жыл бұрын
That's a bad ass truck u got
@boostedS10 Жыл бұрын
Thanks man, hope it only gets better from here
@Lockedinstreetracing Жыл бұрын
Nice build brother
@boostedS10 Жыл бұрын
Thank you man!
@andersonbortolazzo69822 жыл бұрын
Very nice your video Great explanation💪💪💪🔥🔥
@boostedS102 жыл бұрын
Hope it helps some people
@boostedS102 жыл бұрын
Hope it helps some people
@tristan7092 жыл бұрын
Nice truck man. Did you have to do anything with the steering shaft to fit those headers? Im starting a s10 build myself this winter.
@boostedS102 жыл бұрын
Yes, cut one header tube off and welded it back to fit around the steering shaft
@shortblock68472 жыл бұрын
Nice I'm you made that video now we just need some shirts,stickers,etc to show some support!!!!🔥🔥🔥🔥🔥
@boostedS102 жыл бұрын
One day, I definitely want some shirts made after I get some good pictures to use
@shortblock68472 жыл бұрын
@@boostedS10 that's kool I have a stock transmission cross member if your going back that route I'm in Highlands,TX 77562
@boostedS102 жыл бұрын
Not to far away, but I plan on going powerglide soon
@jayroller70542 жыл бұрын
Bad ass truck bro! ✌️
@boostedS102 жыл бұрын
Thanks man, put a lot of time into it forsure
@jayroller70542 жыл бұрын
@@boostedS10 Yeah I can tell bro! I’ve got a Chevy Luv with a 500+hp small block. I can’t imagine having double the power haha.
@boostedS102 жыл бұрын
Hell yea man, I like the luv trucks
@rooter_glide91812 жыл бұрын
Very nice build!
@boostedS102 жыл бұрын
Thank you! I love that others enjoy seeing the truck build
@CruisinWithKevin5 ай бұрын
Just subscribed and came to see what’s happening lol
@boostedS105 ай бұрын
Thanks man💪🏽
@P-man4208 ай бұрын
badass s10
@boostedS108 ай бұрын
Thank you!
@checkeredpastracing1984 Жыл бұрын
How much HP? And what size feed and return fuel hose? Awesome truck dude.
@boostedS10 Жыл бұрын
It made 1100 on the dyno, and I got -10 feed and return lines. With 2 big fuel pumps
@checkeredpastracing1984 Жыл бұрын
@@boostedS10 nice. That’s the same set up I just put on my twin turbo c10. I am hoping to start it this evening so I was watching some videos and ran across yours! Fingers crossed everything goes good!
@boostedS10 Жыл бұрын
Just comment if you have anything you may need help with, or on Instagram at Boosted_s10_
@checkeredpastracing1984 Жыл бұрын
@@boostedS10 thanks man!
@stevenbelue54962 жыл бұрын
Got a couple questions, first what have you done to the 6 liter, any better internals or just stock? Cam? Second what tig did you go with? alpha maybe? got a glimpse of it but couldnt tell. Sharing any times? Im about to start a similar gen two 99 model, probably LY6 th400 with either an 8.8 or 9" or maybe a aluminum 400 sbc. All this is stuff i have except an 8.8, ive been surfing youtube checking out all the s10 builds for ideas. Hard to make my mind up. 6L probably be considerably cheaper. But i love the old school 400 small blocks
@boostedS102 жыл бұрын
Cam,pistons, rods is different. Crank, heads, and block are stock. And yea I got the alpha machine. It’s not a bad machine but I think I already got a gas leak some where on the supplied hose
@RogerBell-k1w27 күн бұрын
I got a question on how your roll cage was tied in to the frame/outriggers. Building an s10 and I think I have the same cage and I need to modify it like something you have…. Are you in Texas?
@boostedS1026 күн бұрын
The main hoop is welded to plates on the cab floor then added a bar to go down and tie into the frame, I didn’t do the cage so not sure if it’s a kit or not. I’m not a fan of the cage going to the cab so I plan on cutting this one out some point this year
@RogerBell-k1w26 күн бұрын
Is there anyway I can call you or visit with you? I’d like to see how it’s been tied in and I’m in the same boat and trying to get ideas on how to tie it in to the frame
@RogerBell-k1w26 күн бұрын
Not sure if there is a way to DM on here.
@jackperry9369 Жыл бұрын
Nice ass ride creative build
@boostedS10 Жыл бұрын
Thanks a lot!
@jackperry9369 Жыл бұрын
@@boostedS10 thanks I subbed I'll b watching your stuff brother
@boostedS10 Жыл бұрын
Thanks man! Means a lot
@sheltonbogarage9580 Жыл бұрын
What steering shaft? I Love the truck I’m building mine just like it.
@boostedS10 Жыл бұрын
I don’t know the brand of it, I can take a picture or something tho
@helloyesh6 ай бұрын
man i have to ask, how much you got invested in this s10? looking to build one myself
@boostedS106 ай бұрын
Man idk a number really, has been so much over the last couple years lol I’d guess 40k after everything, just my fuel system was 5k
@helloyesh2 ай бұрын
@@boostedS10 one more question hahaha what cage do you have? i cant find one that does through the cab rather than the window
@boostedS102 ай бұрын
@helloyesh it was a custom cage, I don’t think you will find a pre bent one that goes through the bed because it’s technically not the correct way
@advancedstreettechnology2081 Жыл бұрын
Sry to hear about the role over.. any idea on numbers or 1/4 mile?
@boostedS10 Жыл бұрын
Never ran quarter mile, pretty much all the no time stuff around Houston is 1/8th mile
@NX93COUPE Жыл бұрын
How did you mount you Kirkey seat? What brackets did you use?
@boostedS10 Жыл бұрын
I got them off the guy I bought the roller from, he had made his own set that bolted into the stock location and then to the kirkey mounting points
@boostedS10 Жыл бұрын
He used some like 3/4” bar and vent/welded it all together, unfortunately I can’t post a picture here or I would show you
@brucealexander1702 жыл бұрын
I like the truck
@boostedS102 жыл бұрын
Thank you!
@elisturgeon8013 Жыл бұрын
do you have a part number for that ict billet alt bracket? been looking for one that will fit down there inside the stock frame rail.
@boostedS10 Жыл бұрын
551667EWP-3 there is the part number, that is the truck spacing one I believe
@WhateverWithWheels Жыл бұрын
Awesome! Thanks man!
@deadendgarage5401 Жыл бұрын
What oil pan are you running?
@boostedS10 Жыл бұрын
It’s a h2 or h3 idr which one it was now, but hummer pan
@vrg69 Жыл бұрын
Check out Gowen mountain speed shop he makes some badass cross members
@boostedS10 Жыл бұрын
I’ll have to look that up, never heard of them
@teondrickreeder8691 Жыл бұрын
What did it run in the 8th when it was setup like this?
@boostedS10 Жыл бұрын
The last video I posted I went through what it all ran, went a I believe as 5.23 when it lifted a head last pass
@lajones4175 Жыл бұрын
What size Throttle Body is that
@boostedS10 Жыл бұрын
It is a 102mm
@williamrumptz9160 Жыл бұрын
U running stock rotors with rc comp wheels
@boostedS10 Жыл бұрын
Wilwood brakes all the way around
@williamrumptz9160 Жыл бұрын
Even rotors are from wilwood
@boostedS10 Жыл бұрын
Yea all of it
@thomasblottman6741 Жыл бұрын
How much hp?
@boostedS10 Жыл бұрын
The combo made barley over 1000 with 67mm turbos, now they are 72’s so I’m unsure what exactly it makes now but I’m sure that gained a couple numbers with the new turbos
@williamrumptz9160 Жыл бұрын
Or any kind of spacer for center cap to fit
@boostedS10 Жыл бұрын
No it fit how it was, I didn’t change anything or order anything special
@williamrumptz9160 Жыл бұрын
I got stock rotors but wilwood brake calipers just scared center caps won't fit
@williamrumptz9160 Жыл бұрын
Thanks for the help u have a beautiful truck man
@williamrumptz9160 Жыл бұрын
Any drop spindles on truck
@boostedS10 Жыл бұрын
No sir
@williamrumptz9160 Жыл бұрын
15x10 with 5.5 back spacing don't rub on inside
@boostedS10 Жыл бұрын
On mine it don’t but idk if my rear end is shorter any then the original one. It’s like a quarter inch away from the frame at most, super close
@williamrumptz9160 Жыл бұрын
@@boostedS10 thanks yeah I've ask around they said the same thing they say its close but it doesn't rub
@williamrumptz9160 Жыл бұрын
I got 15×10s with 4.5 backspacing on now just trying to tuck more under truck cause that little bit sticking out don't look right thanks again
@tonyrhoton66137 ай бұрын
Src s10 has double that power
@boostedS107 ай бұрын
Yea his truck is a different level lol
@sledgenwedge Жыл бұрын
Just once I would love to see somebody seriously build a 2.2 l instead of just slapping in LS And Throwing away the original motor😢,
@boostedS10 Жыл бұрын
I got the truck as a roller so it was all already missing
@deegan7278 ай бұрын
It usually costs a lot more to build something the aftermarket has zero support for and it would have a lot less power. Stock head casting or even a billet one off and with a stock block it would be a fraction of the horsepower an LS can put out and the LS would have costed a fraction of what that 2.2 would cost to build. 2.2= more money, less power, less reliable meaning you’ll be building and spending that money or more again to do it again. That’s why no one is building an 80s stock block 4 cylinder.
@jasonwann50797 ай бұрын
Why don’t you do that and start a channel. I would love to see the outcome. I think that would be a cool build
@sledgenwedge7 ай бұрын
@jasonwann5079 Kind of hard a r p does not make studs for that particular engine, Nobody makes an aftermarket head.. And so far I Have not found any cams or cranks that would support this in line format, Just like the commenter below , you said it's really difficult to build an engine that nobody builds. But I have done my best new pistons new bearings cam rod mains Cometic head gasket Three core all aluminum welded radiator. Cold air intake and headers with a borla exhaust. It's a good little engine probably wouldn't be so anemic In power if assisted with a turbo or Pro charger of some sort
@michaelweber43842 ай бұрын
Looks nasty... Can I have it?
@beasyphone Жыл бұрын
Very nice truck. Guess its funny to me ; i put one kids college education into a billet crank for my 99 zr2 lol, probably have 2 years salary in it and can nane the bolt plating company i used for the nuts underneath my plsnted seat brackets😂😂. Youd still blow my doors off lol. Im on my 7th S10, jusy aoways had a place in my heart i reckon. But what a great example of a first gen. Ill build one someday, but for now i just put in two non fia Braum Alpha X because i was bored and had a G laying around *kidding. But seriously- looking at yours makes me question my decision making abilities lol. #INEEDANADULT..f*ck, im the adult...but again, Great looking S10. I 💯 % dig it.. S10forum-> Beasyphone /99ZR292
@boostedS10 Жыл бұрын
Not sure how I did not get a notification for this comment, but thank you sir and damn that’s alot of s10’s😂