1000TON HYDRAULIC CYLINDER ROD DIAMETER600

[@NecatiŞafak-u2q]

Müthiş bir iş devasa bir parça

[@MyLatheWorld]

Evet kardeşim teşekürler

[@oscarbaez4756]

10 tons

[@MyLatheWorld]

I'm talking about the power of the hydraulic cylinder

[@brodricj3023]

@@MyLatheWorld I was wondering about that. No way that cylinder weighed 1000 tons.

[@Sillyturner]

@@brodricj3023. Looking at the dimensions on the drawing that shaft wouldn’t weigh quite 4 tons.

[@zorbakaput8537]

@@Sillyturner Not 10 tons not 4 tons closer to 5.2 to 5.3 tonnes in finished state. (around 7.2 cu mtrs)

[@MeryemAçıkgöz-c3e]

👍👍👍

[@MyLatheWorld]

👍👍👍

[@francoisrossini9889]

Félicitation ami. J'ai réparé et entretenu des vérins de 1.500 T et ta façon de travailler est bonne, efficace et démontre une grande expérience. Même le jeune est doué pour ce métier, il est concentré et adroit jusque dans sa façon de ramasser la cravate de levage. Bonne continuation. A 72 ans, je me ressens encore de mon métier.

[@MyLatheWorld]

Thank you master for your nice comment

[@necatisafak8046]

Ustam yardımcı elamanindan Bir video bekliyoruz güzel iş ,

[@MyLatheWorld]

Teşekürler kardeşim çekmeye çalışalım 👍👍👍

[@svobodnyichel]

İyi çalışmalar

[@MyLatheWorld]

Teşekürler 👍👍

[@TOTOTRAZOM]

Encore une très belle vidéo, bravo l'équipe, magnifique connaissance du métier, merci👋👋👋👍👍👍❤❤❤

[@MyLatheWorld]

Thank you very much, beautiful person, we are doing our best.

[@seyityldzlar6334]

iyi iş

[@MyLatheWorld]

Teşekkürler 👍

[@fatihkalin3867]

Yanınızdaki çıraklara gerçekten çok değer veriyorsunuz keşke herkes sizin gibi olsa

[@MyLatheWorld]

Teşekkür ederim kardeşim onlar bizim geleceğimiz yanımızda olan çocukları en iyi şekilde yetiştirmeye çalışıyorum ama eskisi gibi değil artık çırak bulmakta zor

[@ManuelMoreno-ll6ly]

Lo primero que hay que hacer es apoyar el contrapunto a la pieza.Despues aproximar las garras del plato a el diámetro de la pieza,después ir ajustando la concentricidad y el centrado de la pieza en el plato de amarre.Fundamental,lo primero apoyar el contrapunto a la pieza

[@MyLatheWorld]

Thanks bro 👍

[@Miray-n8h]

👍👍👍👍👍

[@MyLatheWorld]

👍👍👍

[@sparky687]

I am really pleased to note how young they both are. The knowledge is being transferred 👍🏾👍🏾👍🏾

[@MyLatheWorld]

Thanks brother, yes we are young for now but we will grow old too, time passes very quickly

[@OyundunySı]

Güzel işçilik 👍

[@MyLatheWorld]

Teşekkürler 👍🤲

[@pvtimberfaller]

What make of lathe is that?

[@MyLatheWorld]

You are asking the brand of the lathe, I think the brand of my nail is S.M.T.C.L.

[@adnanduman9651]

Kolay gelsin 👏👏👏

[@MyLatheWorld]

Teşekkürler 👍👍

[@İbrahimAtik-i8m]

Ellerine sağlık usta güzel işçilik

[@MyLatheWorld]

Teşekkürler kardeşim 👍👍

[@sami4242-]

Ellerinde sağlık ustam

[@MyLatheWorld]

Teşekkürler 👍

[@fatihkalin3867]

İyi çalışmalar ustam kolay gelsin

[@MyLatheWorld]

Teşekkürler kardeşim 👍👍

[@GulcanDuman-b3s]

İyi çalışmalar 👏

[@MyLatheWorld]

Teşekkürler 👍👍

[@TOTOTRAZOM]

Et aussi très beau matériel👍👍👍

[@MyLatheWorld]

Yes brother, the chrome is also very nicely coated.

[@irish-simon]

you can't beat a bit of old school screw cutting no cnc here 😁

[@MyLatheWorld]

👍👍😃😃

[@marcojeeninga2322]

Mooi stuk vakwerk, mooie dingen maken jullie daar

[@MyLatheWorld]

Thank you very much brother, we are doing our best.

[@Mohsinkiduniya123]

Assalaam walekum

[@Mohsinkiduniya123]

I'm from India my name Mohsin I have own my workshop lathe machine shop fabrication shop mein

[@MyLatheWorld]

Hello Mohsin brother, greetings from Turkey

[@habibbasar5599]

Çok süper Bir iş devasa bir rod

[@MyLatheWorld]

Teşekkürler

[@CHOGAN_HT]

Ich habe auch Dreher gelernt… Du leistest sehr gute Arbeit 👏🏼

[@MyLatheWorld]

Vielen Dank, Frau, es ist toll, dass Sie Ihren Beruf erlernt haben.

[@aytingenfores2846]

😊

[@MyLatheWorld]

👍👍

[@AdrianHiggins83]

Wow

[@MyLatheWorld]

👍👍👍👍

[@kezibanozcan9321]

👏👏👏

[@MyLatheWorld]

👍👍👍

[@cc88000]

👍👍👍🤘

[@MyLatheWorld]

👍👍👍

[@meryemcoskuner5050]

İyi calışmalar

[@MyLatheWorld]

Teşekkürler

[@Xris-FJ1200]

C'est franchement pénible ces videos en accéléré.

[@MyLatheWorld]

I'm speeding it up because it's taking too long.

[@ÖmerDaşdemir-n1r]

🎉🎉🎉🎉🎉❤❤

[@MyLatheWorld]

👍👍👍👏👏

[@АгронДепартье]

Where this detail come from/wasn’t it produced using lathe? If yes - then why not produced in one go ? What happened between two lathe operations ?

[@MyLatheWorld]

You have touched on a good subject, congratulations. We have the chrome plating of this ROD done outside. When putting it in the boiler or during shipment or lifting and lowering, they damage the piston side, so I process the piston side after it is chrome plated and delivered.

[@Hobi-atölyem42]

👍👍👍

[@MyLatheWorld]

👍👍👍

[@Citizenturcica]

Mükemmel bir tesis. Borsaya açık bir şirket olmayı hak ediyor.

[@MyLatheWorld]

Eyvallah kardeşim teşekürler Konya nın en kurumsal şirketlerinden biriyiz alanımızda da en önde gelen şirketiz

[@ParamjeetSingh-qm8pd]

For what is this shaft will be used after the turning ??

[@MyLatheWorld]

We produced 1500 tons of HYDRAULIC CYLINDER rod for hydraulic press

[@parnuzutech]

Listen

[@MyLatheWorld]

I did not understand you🙂

[@parnuzutech]

I am listen to learn friends

[@hoangmessi393]

LUÔN LUÔN ƯU TIÊN AN TOÀN LÊN HÀNG ĐẦU. GOOD LUCKY

[@MyLatheWorld]

You are right brother, thank you 👍

[@sdssds1086]

Felicitari la domnii strungari!

[@MyLatheWorld]

Teşekkürler kardeşim 👍

[@toyotabob7535]

I know this has been brought up many times....wheres your saftey glasses? You only get 1 set of eyes...also wearing gloves around lathes and mills is a very bad idea

[@MyLatheWorld]

Yes, you are right. I use all of them when necessary. I use gloves to protect my hands. I do not use them because they are dangerous when adjusting the counter.

[@realrusskij1]

Not all countries have the same safety rules.

[@MyLatheWorld]

@@realrusskij1 Yes you are right

[@fredmago6308]

Una vez vi como en la fresadora a un compañero le saco el guante de tela de la mano, podria haber sido peor, es mejor prevenir.

[@MyLatheWorld]

If you have gloves, you should not touch any rotating part of your hand.

[@robertpeters9438]

Maybe you should get a new sling for such heavy loads. I have seen dirty ones snap from grit damage.

[@MyLatheWorld]

You are right brother, rope is very important in our work. Right now, it is the safest rope that can lift these weights. If I feel that this will be a problem, I will not use it anyway.

[@MichaelWright-l5o]

Your work procedure is unsafe . This should be done with a steady rest to help support while it is being machined . This would also enable deeper depth of cuts with higher feed rates .

[@MyLatheWorld]

I did not use a bearing because the rod was chromed. I am actually someone who cares about safe operation.

[@madmike4]

I learned quite a bit machining over 35 years and I’m finally happy to say I’m getting the hell out of it as of today . Companies don’t pay shit today for skilled labor so good luck with the young generation who don’t want to work . 🖕

[@MyLatheWorld]

You are right in some of what you say, my friend, but I love my job.

[@SasthaSubbarayan]

it is bitter to swallow, but,.it is TRUE

[@MukrimYam]

Itu.setruk.berapa.bos.katanya.hidrolik.

[@MyLatheWorld]

I didn't quite understand what you meant.

[@mehmettopcu3807]

Müthiş🎉

[@MyLatheWorld]

Teşekkürler 👍👍

[@Gülözcnn]

İyi iş çıkardınız🧿

[@MyLatheWorld]

Teşekkürler 👍👍

[@ghostchaser6300]

How much US dollar this one ?

[@MyLatheWorld]

Unfortunately I don't know, my brother, it's my job to do it.

[@CharlesGates-v6n]

The post is inaccurate. Translated to pounds would be over 2.2 million pounds. Next time you post, double-check the numbers.

[@MyLatheWorld]

I didn't write anything wrong, what did you find wrong?

[@DH-wr7rw]

What brand is that lathe? Who made it?

[@MyLatheWorld]

The brand of our lathe is S.M.T.C.L. It is a lathe made in China.

[@fredmago6308]

velocidad de torneado

[@MyLatheWorld]

Are you asking about rotation speed?

[@fredmago6308]

@@MyLatheWorld Si,queria saber a que RPM gira el plato independiente gracias, buen video.

[@MyLatheWorld]

Thank you, it rotates at 80 rpm.

[@FrancoMancone-w6x]

Tres professionnel cependant l'amarrage de la pièce n'est pas sécurisant il faudrait 2cordes

[@MyLatheWorld]

Thanks bro, you're right, it's a bit difficult to balance.

[@mayankpatel59]

It's 1 ton not 1000 ton

[@MyLatheWorld]

I am talking about the power of HYDRAULIC CYLINDER. This ROD is produced for 1000 tons of hydraulic press.

[@ShortArmOfGod]

How could you possibly think this was only for 1 ton, pajeet?

[@MyLatheWorld]

👍👍

[@mayankpatel59]

@@MyLatheWorld sorry brother 😁😂

[@MyLatheWorld]

@@mayankpatel59 👍👍

[@PeterLee-zn3jl]

Turn off the beeping noise..ok..?

[@MyLatheWorld]

Ok brother my fans are sending me messages

[@vptechbiocorp]

Which country you are?

[@MyLatheWorld]

We are in Turkey

[@Citizenturcica]

Bu hidrolik sistemler yerli sanayi için mi? yoksa ihraç için mi üretiliyor?

[@MyLatheWorld]

Yerli sanayi içinde yurtdışına da üretim yapıyoruz

[@backho12]

I always throw some wood cribbing/blocks across the ways at both ends just in case is a slip up

[@MyLatheWorld]

I didn't use it because I was confident, it would be better if I used it, brother 👍

[@andy1way]

One thousand tons?

[@MyLatheWorld]

we produced this cylinder for 1000 tons HYDRAULIC press

[@giorgiobassi9078]

45..... quintali..👍🙏🇮🇹

[@MyLatheWorld]

🇹🇷👍

[@ЖорикСубботин]

Обычная работа токаря, каждый день такую делал,валы карьерных экскаваторов точил.

[@MyLatheWorld]

My colleague, now it is our turn to work, one day we will also retire.

[@isobar5857]

I think you have put two extra zeroes in the title by mistake...!

[@MyLatheWorld]

I guess you thought I was talking about the weight of the material, but I am talking about the power of the HYDRAULIC CYLINDER we produce, there is no mistake in the number.

[@ЖорикСубботин]

От силы 2 тн. Где этот расслабон по двое работают?

[@MyLatheWorld]

The weight of the piece is more than 2 tons

[@MrKotBonifacy]

About five and half tons, I reckon? (5500 kg)

[@MyLatheWorld]

Yes my brother

[@gilbertochavarriagaalzate8716]

1000 Tonnen ..???

[@MyLatheWorld]

I'm talking about the power of the HYDRAULIC CYLINDER

[@donpasquale3187]

Ciekawe czy zdarza się zepsuć taki wał?

[@MyLatheWorld]

It depends on where it is used but I don't think it's possible.

[@jamestamu83]

1000-tons equals 2,000,000 lbs!! I don't think so! Still very impressive, but weight is wrong.

[@MyLatheWorld]

I am not talking about the weight, I am talking about the power of the hydraulic cylinder. We produced it for a 1000 ton HYDRAULIC press.

[@Stefan_Boerjesson]

That is not a 1000 ton object.

[@MyLatheWorld]

I am not talking about the weight of the material, I am talking about the power of the hydraulic cylinder. We produced it for a 1000 ton HYDRAULIC press.

[@Stefan_Boerjesson]

@@MyLatheWorld Then You expressen it completely wrong.

[@MyLatheWorld]

I am writing from a translation, it may have a different meaning, but I checked it, there is no misunderstanding.

[@Stefan_Boerjesson]

@@MyLatheWorld Translators have there weaknesses. Extra care is needed. Don't use complex, multi fact expressions etc

[@MyLatheWorld]

@@Stefan_Boerjesson Ok bro thanks 👍

[@АлексейРогозин-ш1ю]

Молодцы

[@MyLatheWorld]

Thanks bro 👍

[@henrycole8705]

Use a steady rest. That comes off there. the lathe is history. and it will kill you. yikes

[@MyLatheWorld]

I don't quite understand what you mean.

[@SeeSaw72]

@@MyLatheWorld if your piece accidentally falls of the live center it would ruin your beautiful lathe as well as the work piece. Better safe than sorry.

[@MyLatheWorld]

@@SeeSaw72 Yes, it wouldn't be good if such a mishap happened, but the conditions require it.

[@wildniscamper7276]

1000Kg = 1t not 1000t😂

[@MyLatheWorld]

I didn't understand what you meant.😃

[@wildniscamper7276]

@@MyLatheWorld this rod weights maby 1t so 1000kg instead of 1000t or what did you try to say with that titel? is it for a 1000t press? than write that bro...

[@MyLatheWorld]

The weight of the material is over 5 tons, but we produced this ROD for a 1000-ton hydraulic press, so I'm talking about the power of the hydraulic cylinder.

[@wildniscamper7276]

@@MyLatheWorld you guys are doin are great job! but keep workin on those titels😂✌️🍺 cheers from bavaria

[@MyLatheWorld]

@@wildniscamper7276 thanks bro 👍

[@Vlad22051969]

1000 кг

[@MyLatheWorld]

I am talking about the power of the HYDRAULIC CYLINDER, it is produced for 1000 tons of hydraulic press.

[@edekoka6267]

The whole plant is not a thousand tons!

[@MyLatheWorld]

I am talking about the power of HYDRAULIC CYLINDER 1000 tons HYDRAULIC press cylinder

[@karlzimmer683]

Huh??

[@MyLatheWorld]

??

[@野々上昌利-r7y]

Одна ТЫСЯЧА тон????? и всё.

[@MyLatheWorld]

I am not talking about the weight of the part, I am talking about the power of the HYDRAULIC CYLINDER we produce. It is produced for 1000 tons of HYDRAULIC press.

[@野々上昌利-r7y]

@@MyLatheWorld Извини, я не понял.

[@MyLatheWorld]

I'm talking about the power of the HYDRAULIC CYLINDER

[@Skyetender]

Think you have 2 zero`s to many.

[@MyLatheWorld]

Thank you

[@brianosborne4996]

100 ton, surly not!

[@MyLatheWorld]

I am talking about the power of the HYDRAULIC CYLINDER, it is produced for 1000 tons of hydraulic press.

[@sammyd7857]

Absolute crock of shit that a live center can support 1000 tons

[@MyLatheWorld]

We produced this Hydraulic cylinder rod for 1000 tons hydraulic press. I am talking about the power of the hydraulic cylinder.

[@sammyd7857]

@hydraulicfactory the title should be " 1000 ton hydraulic press cylinder"

[@MyLatheWorld]

@@sammyd7857 Of course it could be

[@Micha-nd1cs]

1000 ton hehe ,maybe 100 000ton ?

[@MyLatheWorld]

I don't understand why he showed a sarcastic attitude. If you don't know, you can research and learn. This ROD is produced for 1000 tons of HYDRAULIC CYLINDER. 1000 tons of HYDRAULIC press cylinder.

[@AyşeTopcu-p2t]

👏👏👏👏👏👏

[@MyLatheWorld]

👍👍👍👍👍

[@MeryemAçıkgöz-p1d]

👍👍👍

[@MyLatheWorld]

👍👍👍👍