1000W 48V EBIKE, QUICK NIGHT RIDE. 4K CAMERA.

[@kindnessark8064]

The camera is very good quality. I may try to invest in a 4K camera next now. I use a cheap £40 Oregoen Chamillion camera which records 2 ways at once. I use one on the front and one on the back, BUT the quality is not very good unfortunately.

[@berniegarland1679]

Top Post thanks (y)

[@amarayizayiz1043]

hello sir. Excellent content as usual what did you use to connect the battery to the controller as the battery wire end doesnt match the controller wire end

[@EbikeRyder]

Thanks Amar, I used XT60 connectors for the battery and controller, I had to change them myself, the controller came with bullet connector and the battery came without a connector. If you are having a battery above 52v maybe a XT90 would be better.

[@amarayizayiz1043]

Hello sir. I have a 1000w 48v motor with a 48v 13ah battery. What connectors shall I get and do I have to remove the pointy ends on the controller and replace them with the connectors. Thanks

[@EbikeRyder]

@@amarayizayiz1043 hi, I would recommend XT60 OR XT90 connectors. Yes you would have to cut the point connectors off strip the wire and solder the new connector on. The XT60 or XT90 connectors are available on Amazon and quite cheap, around £4 for a pack of 10.

[@amarayizayiz1043]

@@EbikeRyder hi, can you please put a link on where you bought your battery from. thanks,

[@EbikeRyder]

@@amarayizayiz1043 hi mate, I don't know how to send the link but I bought it from Ebay, its brand name is Yosepower, its 48v 20ah the seller is called yspower-2012. It was £319.99. Hope that helps, if you can't find it let me know and I'll get someone to show me how to send the link.