10012W | VEX Spin Up | Early Season Reveal 6m Drive 450RPM 2.75" 1 Piston Indexer
Пікірлер: 78
@KamalCarter Жыл бұрын
I enjoy the callback to FRC 118 Robonauts 2013 Video
@itsvoid29172 ай бұрын
They really holecounted their reveal video 💀
@5155E Жыл бұрын
Awesome job!! I love how fast it can shoot 3 discs!!🔥🔥
@YouTubePlusOfficial Жыл бұрын
Yesssss, thats what i was looking for. hanks for helping
@PPronounceThis Жыл бұрын
Literally was going to use that song for our next reveal.
@Diam0nder Жыл бұрын
Awesome robot huge inspiration tysm
@kainakamura1246 Жыл бұрын
Nice robot! How many actuations do you get out of ur indexer before you run out of air?
@kevindachille6309 Жыл бұрын
Great video! now... the GMS soft really distorted in my mac, I searched a couple of tutorials to change in nu Options content settings,
@nikethbalakrishnan208 Жыл бұрын
I like the rapid fire indexer.
@urbanfoodecology Жыл бұрын
What gears do you use for your drive base? And how are they positioned, thanks! Struggling to build a 450 rpm drivetrain.
@challacustica9049 Жыл бұрын
Fast and efficient. Nice.
@rainbowofdoom719 Жыл бұрын
CLEAN🔥🔥
@sofifr Жыл бұрын
hello, what are those "side panels" with your team number on it, where can you find it? ty!
@blackout_robotics Жыл бұрын
Excellent choice for the color scheme, not biased though.
@connorm_3605 Жыл бұрын
Black out, black, everything black Black, everything, everything
@ryanallen1606 Жыл бұрын
it's not enough, make the flex wheels black. Make the chain black, matter of fact just take a black paint bucket and dump it
@connorm_3605 Жыл бұрын
@@ryanallen1606 at this point pull an X-Robo and spray paint the entire robot (even the motors) black.
@foothillrobotics1000 Жыл бұрын
How long did it take for your flywheel to be delivered?
@ali-1353 Жыл бұрын
CLEAN AF
@justinan3487 Жыл бұрын
3 words to describe this robot Sean, Black, Hot
@cupcakeman4371 Жыл бұрын
Does your flywheel motor overhear a lot ?
@grqce9799 Жыл бұрын
how did you guys get yours to accurately throw it into the hoop at different distances?
@alfredalvarado4520 Жыл бұрын
Did you cut the mounts for the grey flex wheels?
@Taran_K Жыл бұрын
Very nice
@Ace-rd7tf Жыл бұрын
Hi how did you build your frisbee grabber thanks
@4073B Жыл бұрын
How do you guys shoot discs so fast?
@turtz4life432 Жыл бұрын
Omg 10012W house reveal
@ibrue Жыл бұрын
nice intake 😉 ~ 7686b
@turtz4life432 Жыл бұрын
Haha you’re in our worlds division
@62629W9 ай бұрын
very epic
@eclipse-gt9qg Жыл бұрын
what pneumatics gun do u use
@theflyingcuber Жыл бұрын
SEAN ON TOP
@seanchan-sato3515 Жыл бұрын
51581S ON TOP
@charleslockard8057 Жыл бұрын
do you guys use a double action piston for the indexer? If so how many shots do you get with it?
@chad7917 Жыл бұрын
I don’t know about them, but I use a double action piston for my indexer on my robot and I‘ve never had any sort of problems with running out of air
@charleslockard8057 Жыл бұрын
song is fire
@gioaguirre4833 Жыл бұрын
Have you had any problems with the one motor flywheel? Also what is the rpm of the flywheel if you don't mind me asking?
@seanchan-sato3515 Жыл бұрын
We have had no problems with the one motor flywheel and it is running at 3000 rpm
@ryanallen1606 Жыл бұрын
are your wheels bolted to your gears? Just curious because we also have the 48t gears on our wheels.
@seanchan-sato3515 Жыл бұрын
yes, we use standoffs to connect the wheels to the gears
@c-dawg6472 Жыл бұрын
I just got to ask because I’ve been having so much trouble getting a flywheel to spin fast enough and have the able to get some distance. I’ve tried one wheel flywheel and two wheel and just can’t figure it out. Any pointers?
@HelloHello-mo4mr Жыл бұрын
Similar problem here, still haven’t properly fixed it but it seems to do with not having it properly stabilised or the bars being uneven so the axle bends
@Dazza3000 Жыл бұрын
Hot as always -10478S
@dfuzeyosh Жыл бұрын
Hey, our team is from a very small school and this is a first year making one. If you can can I ask how did you make the pick up mechanic thing at the front go up and down?
@bando9482 Жыл бұрын
it is on a hinge, probably some bars attached to somewhere a bit further up that are able to rotate.
@user-je9co6cr5i Жыл бұрын
You can use a lightly tightened lock nut- Because they wont fall off, unless using a wrench, they wont have enough power to make it stiff. But they will still stay on because its a lock nut.
@jakubstrunc6621 Жыл бұрын
Very nice robot Does it fit all plastics in size 12" by 24" sheet? Good luck
@1010W_TenTon Жыл бұрын
The side panels are supported in the back, so they count as a non-functional decoration.
@declancraig4712 Жыл бұрын
@@1010W_TenTon I am curious about doing this to my robot. Would you be able to provide the ruling or q/a for this? The only reason I am curious as lexan has a different property of deflection than metal on metal which to me would be considered functional. Thanks if you are able to!
@akileshyelchuru8382 Жыл бұрын
OP bot thanks for leaking - 62A
@user-tm5zm9nf2k Жыл бұрын
SEAN MA BOY!!
@seanchan-sato3515 Жыл бұрын
BARRY !!!!!
@alexlocklair2484 Жыл бұрын
real quick, on the flywheel how did u secure the flexwheels?
@seanchan-sato3515 Жыл бұрын
We used a cnc to make lexan inserts
@seanyeow6726 Жыл бұрын
You guys are using 45A for the flex wheels on flywheel
@seanchan-sato3515 Жыл бұрын
We are using 30A
@chevy3096 Жыл бұрын
sean op !!!
@seanchan-sato3515 Жыл бұрын
3324B op !!!
@logandennis5414 Жыл бұрын
Sean op
@MAikenMagicFRCTeam Жыл бұрын
What gear ratio did you find worked well for that 1 motor flywheel?
@seanchan-sato3515 Жыл бұрын
3000rpm
@morgang5237 Жыл бұрын
Were you using a 600 rpm motor??
@seanchan-sato3515 Жыл бұрын
Yup
@tremix4449 Жыл бұрын
what rpm is your intake motor
@seanchan-sato3515 Жыл бұрын
600
@pres8531 Жыл бұрын
Do you answer questions in. your comments?
@seanchan-sato3515 Жыл бұрын
yea
@bertenheimer Жыл бұрын
They already won bro
@CreatorAcademyAustralia Жыл бұрын
Awesome robot! 27272A would love to connect for alliance pairing at Worlds :D