106 amps 4-pill build

[@TechNineKOQ1152]

Nice and neat build just what I like to see, good job. You can also put a 103 or 104pf cap from the hot to ground to trap the RF from the fan. If you want to put a diode on the hot buss to ground, and a snubbing diode on the relay between the positive and negative. Also try using a 33pf cap on the bypass of the relay to ground to lower the pass thru SWR. everything else looks good. Keep up the good work! from your friend The Professor "Tech-Nine" of Tech-Nine Technologies.

[@frppower1]

Oh wow thank you so much, that means a lot coming from you, thank you for the nice comments and thank you so much for the tips on things to do, I will definitely do them, I know you’re a very respected builder and iam humbled that you took the time to look at my build, wow, thank you for that and the tips so much, take care and thanks again!

[@TechNineKOQ1152]

@@frppower1 You are very welcome! anytime I can help when I have time just let me know and I will get back to you. P.S. I use a 180pf on the input of my DD-400-HG 4-Pills but I will try your 220pf to see if there is a change. If it is then I will use it from know on thanks to you. See you it's bed time for me good night!

[@DonkeyStomperProducts]

I found a 180pf little low, 220 pf little high. 200 pf seems to be it for me@@TechNineKOQ1152

[@newtothreedee]

Thank you for your time and humble nature in presenting your craft.

[@frppower1]

Wow thank you for the nice comment.

[@Dallas-Rife-UDX-347-Tennessee]

Looks great . You have an awesome DX desk setup I saw when you scanned over there to show your Carl Built . Super !! Keep up the good work . Ive always wanted to learn but I keep making excuses . I think for real this time next year I should be finished with a major radio project and actually be able to get a few things and start . Until then , I’ll keep following along and enjoy your content . 73’s

[@frppower1]

Thank you very much,

[@OfficialMrGameX]

very clean build

[@frppower1]

Thank you.

[@28chicagovideogate50]

Beautiful job sir. I love your shop. Wow! I noticed the input transformers soldered to the board. I’ve never seen that before. Not gonna lie,I kinda like it 73’s from 28chicago. God bless.

[@frppower1]

Thank you very much for the nice comments, sorry for the late response been busy family stuff, I really appreciate the nice comments, take care and 73s

[@frppower1]

Oh wow I just looked at your profile and realized who you are, the nice comments mean a lot coming from you , your first two pill clown built and your other videos are among a few that were my first videos I learned from, your kind words mean a lot coming from a experienced builder like yourself, thank you very much 28 Chicago, take care my friend and 73s

[@28chicagovideogate50]

My pleasure. Your a great addition to the CB KZbin world. Keep up the great job. 73’s

[@scottlee1211]

Nice looking build! Thanks for sharing the video.

[@frppower1]

Thank you, very much.

[@pontoonparadise8087]

Very nice build!

[@frppower1]

Thank you very much

[@randyguay7115]

Nice lookin box . Love a clean lookin build.

[@frppower1]

Thank you very much, I really appreciate it.

[@jessiec4128]

I have to say, that is a nice build for sure!

[@frppower1]

Thank you very much for the nice comment I really appreciate it.

[@DonkeyStomperProducts]

Looks Nice to me Good Job!

[@frppower1]

Oh wow thank you so much, that means a lot to me coming from a professional builder like you, thank you for taking the time to look at it!

[@DonkeyStomperProducts]

Just calling it like I see it. Nice Work@@frppower1

[@TheBudman302]

Nice and clean build

[@frppower1]

Thank you very much

[@dwells1180]

good job keep up the good work

[@frppower1]

Thank you very much

[@genesmith482]

Great job!!!

[@frppower1]

Thank you

[@rubenmartinez9519]

keep up the good work

[@frppower1]

Thank you very much

[@henryortiz3656]

First of all, I wanna thank you for your videos. I truly learned a lot from you. I actually built the same box. Your four pill seems to work fine however I can’t seem to find that blue output, tuning capacitor. I don’t know if there was a mistake on the numbers or whatbut maybe you can correct that for me if you don’t mind I appreciate it and I thank you so much again

[@frppower1]

There not easy to find, when I built this four pill I did it exactly like Carl builts 400hd and he had a blue capacitor on the output and it had 151j 6kv on it so it found some of them on eBay and ordered them, and they worked, here is a link to what ica has for tuning capacitors there’s is a 150 3kv but Iam pretty shure it will work the same, Iam just learning the tuning of these amps, so I don’t really have a solid answer for you, but i pretty shure it should be around a 150 pf capacitor on the output, sorry I can’t help out more www.icamanufacturing.com/shop/p/tuning-capacitor-3kv-150pf-120pf thank you for the nice comment

[@frppower1]

This is not exactly but the 150 pf ones in this kit should work just fine www.amazon.com/10000pF-Voltage-Ceramic-Capacitor-Assortment/dp/B073TW1XG1/ref=asc_df_B073TW1XG1/?tag=hyprod-20&linkCode=df0&hvadid=693270340071&hvpos=&hvnetw=g&hvrand=1697612190553412532&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1027270&hvtargid=pla-1649669417969&psc=1&mcid=98f4cb50f8f1387189ce70450d9ec29d

[@DavidHeath-cr9on]

What do you have to do the your truck to make it handle 108 amps . Run 2 batteries. Or add a alternator. Or both . ❤

[@frppower1]

I would say alternator, and a battery isolator, one battery for the vehicle and one for the system, that’s how I did a car audio install years ago that had 4 amps

[@lnglng6961]

❤❤🎉

[@titankiller666]

Absolute top-notch and what a clean build Plus I love your setup totally OCD just like me anyway 73'S from Canada😎💯🇨🇦

[@frppower1]

Thank you very much

[@garybragg517]

4 pill

[@paulshaw4542]

great to see your 4 pill build .i want to build an amp the same specs .what would the max drive input be ?

[@frppower1]

Max input carrier of 8w or 180w max carrier out of amp. Max peak input 100w. thanks for checking it out.

[@samuelh8441]

Good work man. Question: very curious about the yellow strip nut/bolt thread checker hanging on your wall. I use those when in the big box stores..didn't know they sold those?

[@frppower1]

My father got it from ace hardware, he told me that he asked one of the sales guys that he always talked to when he went in the store, could I get one and dad said he ordered him one , that’s my dad’s storie anyway, not 100 percent shure if that’s how he really got it

[@samuelh8441]

@@frppower1 That's awesome..no worries..

[@frppower1]

www.amazon.com/Thread-Measuring-Vertical-Checker-Metric/dp/B071HTKL2T/ref=asc_df_B071HTKL2T/?tag=hyprod-20&linkCode=df0&hvadid=642059619798&hvpos=&hvnetw=g&hvrand=483984058592755964&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1027320&hvtargid=pla-1599800458221&psc=1&mcid=a4d5131969ac3cd98fa2bf40e6af9da9

[@frppower1]

I typed in a google search and it turned up a few different ones, but there all like $45 to $65 , hope that helps.

[@frppower1]

www.amazon.com/Retisee-Identifier-Standard-Centimeter-Classic/dp/B0CGDDBX63/ref=asc_df_B0CGDDBX63/?tag=hyprod-20&linkCode=df0&hvadid=675731002496&hvpos=&hvnetw=g&hvrand=483984058592755964&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1027320&hvtargid=pla-2244489923936&psc=1&mcid=fef30d0c05b8320385866cdfd019c014

[@ironhead320]

Looks good

[@frppower1]

Thanks

[@ironhead320]

@@frppower1 was thinking of try a 2x8 but not sure have to do more research on how to build

[@frppower1]

yeah ive never built one bigger than that 4 pill,id have to research it also>@@ironhead320

[@ironhead320]

@@frppower1 looks like a lot of work have to think about that

[@larrymartin4631]

How do and where can I get all the parts to be able to build my own can you please help me

[@frppower1]

Hello , start by watching my 2-pill amplifier parts list video, if you haven’t already seen it, it shows you all the parts for a 2-pill build, and most all the parts come from ica manufacturing, here is a link to there website www.icamanufacturing.com/

[@frppower1]

kzbin.info/www/bejne/oaGclIuweZllg9k&pp=ygUuZ2F0ZWtlZXBlciBpbiBhbXAgYnVpbGRpbmcgMTAyIGtleWluZyBjaXJjdWl0cw%3D%3D

[@frppower1]

Watch this guys videos, he has a lot of them on keying circuit, relays , inductors, capacitors, and how there used in these amps and how rf flows through the amps www.youtube.com/@1883GotDown/videos

[@frppower1]

kzbin.info/www/bejne/m2fUm3acaNWWrbs

[@frppower1]

kzbin.info/www/bejne/bpOZcoGamdl5sNU

[@fulltruckereffect]

🎙️🎙️🎙️

[@bossman-91]

nice build theres still a couple more things i would do to it if you need some help or tip and tricks just let me know..

[@frppower1]

Thank you very much