(1070) Challenge: Andy C's Schlage

[@jamiemoore2550]

Mr bill, you should do a t-shirt proclaiming Bosnian Bill says "WE DON'T NEED THAT STINKING KEY" I think quite a few subs would love it...p.s. Can i have 10% of the profits for giving you my wonderful idea(JOKE) pukka vid as always and nos star from wales...

[@bosnianbill]

How about a regular LockLab T-shirt? www.patreon.com/bePatron?u=2912724&patAmt=1

[@qpox]

If you take up flower arrangements, remember that roses also has security pins!

[@matttorres5510]

i have no idea what im watching but im mesmerized.

[@PhrontDoor]

Heart dropped when your tension tool / wrench came out before plug spun.. I was like NOOOOO -- unfair - he worked so hard.. LOL

[@AlbertLebel]

I have had that happen, soon as its picked the tension wrench pops loose. Best thing to do is freeze and do like he did. I have learned so many tricks from B'Bill.

[@Sobegod00]

Had to laugh. The ad before watching this video was for Kwikset re-keyable locks...

[@dooleydooley4742]

happy this isn't a "Whipped by" I feel bad when you don't get them open... you and the lockpicklawer should do a "pick off". I think that'll be a GREAT episode

[@georgeeads8689]

One thing I have learned when a pin pops out and you are still in the open position never never turn it back to the lock position. Bill you were lucky on that one. Great video.

[@rayhicks5952]

great entertainment from start to finish. eclectic music intros plus eye candy graphics, solid content, well shot and amazing stream of consciousness monologue.

[@grosstravis]

Andy is a tricky guy. I couldn't pick that guy as soon as you did though. These customs that you guys do are interesting to watch

[@radodrill]

at 9:30 it looks like the keypin in 4 is a little shallow, that could explain why it would stick a bit.

[@MRWonderingHaggis]

I know this video is 2 years old. But I’m a new subscriber. The Location bit about coming home having a sink full and trying to unlock the door was funny and in my mind I turned that joke in to dirty joke

[@mineman2142]

i love that pinning tray

[@ThePockyJocky]

Bro... your voice is so soothing. Don't take this the wrong way but this is the second video that's put me to sleep when I have had trouble.

[@ChristmasLore]

Definitely looks like my entry door has a Schlag. Breathing, now! It does have that characteristic high at the end of the key, low middle, high end. Like a valley between two mountains. I can now sleep sound (with my window.....wide open!)

[@mynock250]

Cant say I've ever seen a 7 pin Schlage before, nice pick Bill.

[@LockpickingNord]

Well picked buddy!☺ what a crazy part I have suffered with you as the core no longer wanted to turn .. evil situation!😐

[@Probably_tryna_sleep]

those weird spool like top pins kinda looked like little Stanley cup trophies lol.. Good pick Bill!!

[@larryg7336]

That is some nasty pinning, Good pick Mr.Bill

[@mw3goymw3goy]

I love it bill I'm adict to watching you work

[@machintelligence]

If there was ever a key that was guaranteed to break off inside the lock, that was it.

[@Deepwaterjew]

Avoid Andy's locks? No, I want them.

[@R_P_K]

That intro had me looking for my phone.

[@Ardeact]

That's seriously the iPhone 4 ringtone... Is your phone really that old?

[@zshredclh10]

That ringtone is available still on iPhones

[@Golinth]

iPhone 4 is considered old? damn.

[@jzdpd]

theone102 yes. try using it in 2017

[@Darkassassin09]

That 7th Chamber looks like it was added to the lock

[@zackshawn3317]

I know what andy was trying to get the lock to do..the long key pins are supposed to jam up in the Bible when you put a pick in the key way kind of like anti bump pins.. Very nice picking as always Bill..

[@hafkensite]

@bosnianbill I have to ask, what's with all the different intros?

[@redsyss2081]

What Is the music in the start??

[@mamefreak3]

would also like to know

[@Mikeywil0003]

its an iphone marimba ringtone remix

[@austinskylines]

adrian fuks dank beat forsure

[@jackedupjunkers1922]

it is mutant marimba chopped & screwed by dj fletch. however good luck finding it due to licensing reasons in the United States. i already contacted some listening platforms about why the song/album isn't avalable in the U.S.

[@micahnightwolf]

Darude Sandstorm

[@kose2ik]

You teach own locks to modify the more secure (no to open strangers locks)?

[@frankbiz]

So security pins don’t work if one is a good lock picker like you. Great work.

[@stratsteveo106]

Its all about slowing down the lock picker and hopefully stopping them. Like ASSA barrel pins being super difficult. I tell my customers locks are just to slow down or deter a thief

[@yetis4lifeyetis4life6]

Great video! I aspire to make a challenge lock worthy to send to you, Bill :-D

[@Buzzcut897]

Hey Bill, new subscriber. I was wondering if I wanted to get into locksmithing where is a good place to start?

[@bosnianbill]

Talk to a local locksmith because the laws vary State to State.

[@Buzzcut897]

bosnianbill Tried that, went to 2 local shops and both just told me "go to community college lol". Also in an older video you said you like to bring challenge locks with you on long flights, my question is how do you get your picks past TSA?

[@send9]

TSA has no problems with picks, I always travel with mine. There's only a few states you can't have picks in (TSA is federal anyway), but traveling to other countries is another story.

[@solareon]

Looks like #7 got drilled in after the fact. That would explain the tight warding towards the back as it wasn't perfectly center.

[@jamesmurphy8014]

Nice pick! Don't take up flower arrangement. Just getting used to lock sport and pollen doesn't like me.

[@yayitze]

How do you mount back on a lock????

[@edwardharoldbutler7076]

WOW... The aliens visited Andy house and had Bill in mind.

[@davemunch999]

Does anyone know how the key ways are made/cut in locks like these ?

[@ManWithBeard1990]

I've wondered about that as well. It's probably broached, I think, but if you wanted to build a custom one yourself from scratch it's probably easier with wire EDM.

[@shockwavecity]

probably broached all the way through a long slug of metal, then they literally cut keyways off the slug.

[@rileyfenley522]

Durrington Dave it looks like it was a previous key that was modified with hand tools.

[@davemunch999]

Thanks for that but it was the key way I asked about not the key itself.

[@FusionDeveloper]

I can't seem to find the answer. I guess it's possible it could be a REALLY long key shaped file (maybe 1-10 feet long) that starts from the bottom. i.imgur.com/EwBHRbm.png The reason it would be so much longer than the keyway it is cutting, is because it would be filing it down a tiny bit at a time. I think this may be the only way, because I don't think it's possible to have spinning blades or rotating files to cut some of the keyways I've seen and still have precision. However, a secured plug with a track based guided file, sounds possible. Let me know if you find an actual video showing this 1 single step. It's something I've wondered about.

[@zekeyo37]

What song is that introoo plz reply

[@kenadams3328]

hi Bill what vise is that

[@bosnianbill]

See the description f/details

[@VincentACorey]

Where did you get the vice you use?

[@lxRAVERxl]

Corey Vincent Panavise. Links should be in description.

[@knoblick7536]

Nearly dropped a bollock thinking about unlubed keyways.

[@woundedmonk1884]

That clamp looks like it's been repurposed from something else. Am I right? if so what is it?

[@lxRAVERxl]

Wounded MONK it's a panavise made for locks.

[@woundedmonk1884]

lxRAVERxl oh cool.

[@lxRAVERxl]

Wounded MONK Sometimes on cylinder locks you'll see him wrap them in a piece of leather so no damage is done on softer metals like brass when tightening the clamp.

[@808beerable]

what kind of vise are you using?

[@ryantfinchum]

808beerable check the description

[@gavinford377]

that intro is poppin

[@RichardsWorld]

That was a well built challenge lock, but Andy could have at least smoothed the key some. All of those rough and jagged edges wouldn't make well for a daily key.

[@douro20]

He violated the MAC rule...

[@monkey_breath]

shoving anything in to anything unlubed while intoxicated is a bad idea!!!

[@miamimercenary]

That is not a customer happy lock 🔐

[@kerryhuston3669]

hi Bill. it's time for all-time worst lock made. lots of comedy like your famous Master Lock 🍌 episode. you have comedy in all your show if you will I call it wit at times. love your c shows. zorkbozz

[@williamfairfaxmasonprescot9334]

Awesome tackle by #BosnianBill

[@DeathToRain]

The key pins look like chess pieces almost

[@marioff3584]

6:48 Gesundheit

[@ar-gaming9014]

BosanianBills Needle point my mom said she cant wait for that

[@TommyGun5136]

I read this tital wrong....

[@RoeLunatic4ever]

2 on 1 day....whoehoe

[@mshambagaming7809]

👌

[@TV-xc5ut]

that key looks just nasty

[@abdelazizbouhdide7055]

I cant open a sica lock 😂😁😁

[@arnie0311]

sweet

[@timothydavy6431]

Guys,... BUY ANDY'S LOCKS ;)

[@TheWham083]

#5

[@derael61]

"CHANBERS OF hORROR"

[@Bodi2000]

Why do you keep calling them copper springs? Copper is malleable and can not be used as a spring. Those are bronze or monel springs, maybe beryllium copper but not likely - beryllium is expensive and carcinogenic.

[@TanTan-ni4mg]

Youre not smart.

[@bradleyb4178]

Ive never been this early!

[@stig..locks..r956]

XXXXXXXXXXXXXXXXXXXXXXERLENT WORK BILL STIGLOCKS..R

[@seanb658]

Enough challenge locks. Get back to showing off odd and unusual locks.