Installing Conveyers for our Robot Feeding System

[@robinghunt]

His account and followers is growing steadily. Good material and interesting subject matter. He works his butt off too!

[@camus6208]

The built is done, nothing to see…

[@motel581]

Those both have to be AI comments

[@robinghunt]

@@motel581 I’m not artificial intelligent, I’m the real deal intelligent. Lol

[@johnmedici6655]

​@@robinghuntI think some people that hear someone that talks intelligently they automatically think it's AI. 😅

[@adammiddleton4037]

Or it could be the wording? People typically wouldn’t speak that way. Has nothing to do with intelligence

[@81carrerasc]

Love seeing you and your Dad working together ....... we don't see enough of him ! G'day from Oz !

[@mikeklehr7105]

WOW!! When I was young and did chores on our family farm the cows got corn silage, bailed alfalfa hay. Topped that off with grown corn, little oats and a supplement. Now a days every supplement is weighed Measured and feed value calculated. Wish you the best on this project. I can't wait to see finished and running.

[@anthonyhengst2908]

That's us, right down to our wheelbarrow delivery system.

[@robynmorris2408]

What a beast of a job getting that wall siding back up!!! Great job, you are almost there.

[@nolyth8129]

If you put an inductive sensor on your office pointing to the mixing station it can detect the mixer and turn on the fan with a timer so it can keep running a bit longer then the time needed tp mix a badge of feed

[@drooplug]

He should be able to tap into the conveyors. Use the sensor you mentioned, operate the fan on the same circuit, or use it to operate a relay.

[@TheGreatPOD]

@@drooplug I agree using a sensor on the conveyor, is a better idea, if I understand from some of Eric's earlier videos, one of the feeding machines basically lives at that docking station. Once it's filled, it will head out and drop off the feed and the second feeder will move from its parking station underneath the conveyors and live there until it's ready to be filled with the next batch of feed, and then it will head out, so the only really good place for that kind of sensor would be on the conveyor. Although you don't know which one of them conveyors is actually going to be bringing feed to the wagon, it may just have to be an optical sensor that sensors across the top where all the feed is coming from, or you could use a power inductive circuit one on each of the conveyors, and if any one of the conveyors is running, it, will trip a relay to turn on the fan with a timer for five or 10 minutes after the conveyor stopped running before it shuts off, you probably also want a Switch next to the door to override to turn the fan on just Cuz. But what do I know I'm no farmer. 😀.

[@bearswartz2907]

Y'all are making it way more complicated than it needs to be! The robot system already turns on a conveyor. Easy enough to trigger a relay that controls the fan whenever a conveyor comes on. If it needs to run for a few minutes longer than the conveyors, use a relay with a timed delay shutoff.

[@mikep5027]

You guys are crazy talented.. you do almost everything yourselves.. I love that

[@ScotWalt858]

Nicely done! Gotta love it when you can start to see your plan coming to fruition!!

[@mllee2008]

WOW!! Nice job! Thanks for letting us have a front row seat for this project Eric. ♥️🙏🏻🇺🇲

[@Trapper3000]

Very exciting seeing it all come together Eric.

[@PrivatePAuLa29a]

looking forward to seeing the entire setup going. i bet it's going to be cool as heck seeing it all running together

[@zeekk109]

Your going to be smiling and have a great sense of accomplishment when it’s up and running !!

[@jazzerbyte]

Fascinating to see this come together!

[@lordofhowell7158]

Quite the operation! Brilliant video 💪🏻 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@joshdettmer5836]

It’s so exciting to see everything come together

[@dennislang4375]

Crazy complicated looking. Lots of planning and forward thinking, best of luch with this 21 1/2 century system.

[@troysmith3680]

So cool to see this coming together. Happy to see a small family dairy thriving when so many I see are dying off.

[@AncilOverbey]

That is phenomenal. So enjoy watching how God has gifted you with your skill set.

[@davekrieg1654]

Eric, the project is coming along pretty well! With your video documenting all the process for if you have issues down the road. It also reminds me of when we built our silo to the new auto conveyor system we built back in the '70s.

[@ronzezulka6646]

Another great update. Looking forward to seeing the robots run. Always a coin toss when ya have to change feed sources. Glad it's working out.

[@RonaldChappus]

P 22:24

[@Xtremeraverbaby87]

It's all coming together so well, well done to you guys for making it happen

[@awaalk777]

This is a really cool project! Coming together nicely. Thanks for sharing

[@claudelory1473]

Eric, I am happy for you and I know it is a great expiation for you seeing the conveyors in place, Looking good, I am happy for you. God bless you. Claude

[@richardbradfield7437]

Great job putting it all back together!

[@billpotmesil]

Pretty awesome! Love watching it come together!

[@paulstephens4760]

That set up is pretty awesome, all the conveyors. and you’re a pretty amazing carpenter Eric

[@carleichler4338]

You have accomplished so much. Keep up the hard work. Your goal is within sight!

[@CharlesReiche]

It's really cool to see how all this is coming together.

[@seadog6351]

It looks really good. You guys did a great job. Can't wait to see it in operation.

[@firashusseini9263]

great work in putting things back in order, continue with the updates and all the best in your progress

[@rontronnesjr]

Project is coming along well and looks great!!!

[@Hehrfarms1]

Awesome patience, it shows!

[@steveteyssier815]

Looking awesome Eric!! Your dad is a great guy and the help you all have! The videos are top notch!! Keep on rolling!!

[@Vinson9119]

Love videos of you guys installing stuff ❤

[@pattiwagner1980]

Looks great! You guys do super work! Thanks for sharing with us!!!❤❤❤

[@prohrerjr]

LOOKING REAL NICE!

[@rogerweaver7686]

All your cuts were perfect first try!

[@robertthomas5590]

Always enjoy your updates.

[@ricklarouche4105]

You’re making it happen! Good on you! 🎉😊

[@farmshoffman8475]

Great awesome video, nice set up going in , corn needs some frost to dry it down

[@homey3051]

Good job guys

[@Token_Civilian]

Looking very nice.

[@JB-mf1zc]

Professional work right there!!!!! God Bless!!!!!!!!!!! He's coming soon!!!!!!!

[@paultijink4235]

The entire setup is really looking good. You are doing a great job. Looking forward to everything being hooked up and in operation.

[@joetheagent]

Yeah buddy! Lets goooo! Made some great progress in this episode. That feed room is going to look sharp when its finished. Can't wait to see all the parts finally going!

[@sherryoverbey9938]

Eric, you are a genius!

[@Zeke-yv3nw]

Wow!! The amount of brain power and hard work in this video is amazing!

[@steveneal2706]

Eric, you and your dad are amazing. The siding job looks great. Great job guys . thank you

[@asquithmainlines699]

It has been interesting watching this all come together. Defiantly a high capital upgrade. If you were to ask your Dad how he is feeling right now would he say apprehensive, excited or just a little bit nervous how this will all work out. Really will be a huge change in your operation.

[@Well_I_am_just_saying]

This is almost like the Jetson's with all of these robots nowadays!!!

[@shutton]

futuristic, man.

[@mrpesky163]

Nice! You and your dad rock👍

[@billjoat]

Looks like you're doing a great job Eric!! Not only being a dairyman you would seem to be a good sub-contractor as well. It's looking more and more exciting all the time. GREAT JOB!!

[@surebrah]

I hope after all this you and your Dad can chill and have more time to yourselves.

[@coyroberts8356]

Looking good!!

[@mikenedjoika2172]

Coming along looking good can’t wait to see it running. Nice job with the metal. 👍

[@flyfliker]

The best KZbin content! Thank You.

[@donaldgibson3121]

Wish you good luck with that setup. That is a lot of remote control moving parts and you only need one to go bad to create a major mess.

[@toddtusler1024]

Looks awesome! As if you don't have enough to do, but I think painting the wood pieces white would look really sharp!

[@JohnDoe-jq5wy]

GREAT INSIGHT...ALL THE PLANNING MADE FOR FLAWLESS FINISHED PRODUCT 😅😊😅🎉❤... VERY PROUD OF Y'ALL 🖐️👏😊

[@drsmith4806]

Starting to take shape can't wait till all set up & kinks worked out, keep up with the video's we are totally hooked & hope you guys are totally satisfied with end result.

[@johnbucklerfarms]

I hope you put a Shed over the Conveyor or Top because Snow and Ice will Be Stuck or Dump into Robots!

[@daveklein2826]

Nothing wrong with moisture in the feed

[@dmfor9001]

Nice work. Agriculture leads the way with technology and innovation.

[@obiwanrazzy]

So cool to see your new setup coming together.

[@albertbusscher4270]

You two would make good roofers the way you did the cut-outs and putting the sheets back !! Looking forward to it being finishes and a great harvest to top it off. Greetings from Australia

[@drkoontz]

Great job, well worth the time it took to get it right!!!

[@JimWhitaker]

Great to see the progress you are making. I will be following the next steps. 👍

[@wolzer90]

Interesting video! Now you can see how the conveyors run to the vectors, before it was a bit difficult to imagine.

[@simplydeplorable8018]

It is awesome to see how well you and your father work together…

[@jimsteele7108]

I am excited to see this whole operation start.

[@robertmiller8336]

I was talking with a friend after church this morning (one of the few dairy farmers in Bucks county PA) One of his college students who has been working for him on and off for a while is starting a new job with the company involved in your project. I also follow a guy out in Iowa, he had the first Lely system, both what you are doing and robotic milkers. It has been interesting seeing it in operation there and watching your build.

[@scottehrenreich4995]

Good ole fashioned OSHA approved farm work. I love it. 😎😎

[@jeffnawrocki6375]

I think everything is awesome. Looking good. Can’t wait to see it all running

[@judsonhunter78]

Looking really cool. But I wonder, shouldn’t the exhaust fan be mounted from the outside, flush with the exterior?

[@CARyan08]

Nice work cutting the metal in on the walls.👍

[@glenn_massie3039]

Why am I so excited to see this all start coming together? I’m not directly benefiting from it 😂 but man is it going to make my job easier 😂

[@carynix8043]

Looks awesome! Enjoyed seeing this feeding system come together

[@TheGreatPOD]

Awesome video as always, I'm so happy and excited for you guys. And thankful that you documented this entire installation. As someone who works nowhere near a farm I find it absolutely fascinating. Also being a big fan of logistics, it's just wonderful to see all these conveyors and stuff coming together, and I have to say I'm very very impressed with your skill set as far as installing all this stuff and making the installation look awesome. Keep up the great work, I can't wait to see the system actually working, saving you and your dad a lot of time giving you more time to look after the cows. Sidenote, you never mentioned them, but I hope the family is doing well and the kids are growing like weeds. Keep up the great work, stay safe and healthy.

[@Anthony-hc7ej]

Always amazed, after all the daily tasks are complete on the farm, at all you are able to accomplish on the special projects. Looks like an insane amount of work. Would be a good teaching method for many businesses out there not just in agriculture as to continued innovation and keeping up with new trends in the business to work smarter and not harder. Probably a speaking opportunity showcasing how far the farm as came for sure. Cheers to your success

[@marleneray1044]

Big transition! Congratulations. Hello from St Paul Minnesota ❤

[@GaryLaurin]

Amazing progress. Going to be a great addition to your everyday routine. Thank you for sharing 👍🏻🇨🇦

[@AurigaMV]

Great job on installing the conveyors and updating the system! It’s impressive how quickly everything came together and how well it’s working. Keep up the good work!

[@perkirkegaardlemming720]

An angle grinder generates sparks of metal and emery. They burn into the surface treatment of the profile steel plates and the metal shavings rust and the surface becomes rough and ugly. A piston nipper is used to cut profile sheets. Contractors learned it the hard and expensive way, new wall/roofing. Exciting to follow your projects.

[@richard3008]

looking great and yeah it was a good idea to remove the metal wall sheets yeah i was a pain to put back and cut around but it looks so good now just goes to show what you can do with a little help and a bit of hard work wont be long now till it all done and you can sit back and watch it all work

[@TjTaylor4706]

Slick setup

[@steveadams99708]

Eric, you and your Dad are men of so many talents! Really great to watch your progress.

[@DJ-bh1ju]

Love the amount of work you guys got done... Bet you'll love it when it's all up and running.

[@blairtuckey9045]

Came together very nicely. Good looking setup

[@harveypenner2386]

Very Good!!

[@jimpolk]

Absolutely great vid today Eric. That's a heck of a lot more complicated than I thought when you first mentioned it. Fingers crossed it all works together when you finally flip the switch.

[@zendaebbe]

Lucky inspector Doggo is there to manage all the hard work, dont want anyone to get hurt!

[@heidizoeller9652]

Impressive work!!! It's cool seeing the vision come to life!

[@NgNg-p5c]

Tidy job - well done!

[@Dj-zz]

Looking great Eric. You have a well rounded & broad skill set. It’s really good to see you continuing to think about safety. ie utilizing ear plugs. Have a nice weekend with your family.

[@wildrat8101]

Great video :) I enjoy watching the progress very much :)

[@Andre_V_Montreal]

Wow! Lots of work but it looks good!

[@russellgilson4072]

Eric its obvious that there was lots planning, hopefully the new installation will deliver like you all anticipate. Great job!

[@JackieDannenberg]

The outside drop between the silo to the conveyor is significant. You going to put something more there ? I’m thinking winter snow and wind and the silage, etc blowing all over the place. Maybe a piece of round canvas down to the conveyor ? You must be excited ! It’s really coming together ! Congratulations !

[@OOpSjm]

Add a 110v relay to the fan and it will switch on when the conveyor starts.

[@richardlaurent7229]

Your designing all looks professional not just doing it but makes it look good looking. Looks like a lot work came together and well done.

[@helmkladivo]

Amazing job guys, it looks great.