I watched this video after finding a Razor A Kick scooter all rusted up in the woods last weekend. I removed the rust, greased it up, and got it functioning again. When I decided to upgrade the wheels to the new 110s, I had the opposite problem where the front wheel fit no problem at all but the back wheel would hit the spring. When I moved the spring the wheel would still hit the rear axle. I then used a hacksaw and a pliers to cut and bend/break off about 1/4 inch on the top of the deck right where the rear fender is so I could push it back just enough to clear the wheel. I filed and sanded any rough edges. I then drilled new holes for the brakes about a quarter inch behind the old ones. Problem solved and it works great now. It was a pain but I had the tools for the job. It's an excellent upgrade and makes the scooter way faster for a grown up kid like me (42 years) hence making it way more fun. :) I also drilled a hole in the folding mechanism and stuck a bolt, nut, and washer into it further securing the handlebars and removed any play in them. This thing is fire now. Thanks for the video of inspiration!
@Recaiden10 жыл бұрын
Just put 110s on my A4. Advice about cutting out the plastic over the front wheel was really helpful.
@p1nesap10 жыл бұрын
Thanks for posting-have fun!
@p1nesap11 жыл бұрын
Raise brake with Allen key while securing opposite end bolt with wrench. Oil the spring and give it some pops. Make sure the plastic piece is not rubbing against wheel. It does fit. Check back when you get it.
@dylonslife11 жыл бұрын
That is awesome dude!!! The extra 10mm really does make a huge difference in performance as well as looks.
@w1tnesep69710 жыл бұрын
What wheels would you recommend for the Razor A2 scooter?
@nebulagraphics21508 жыл бұрын
I am upgrading to 100's on my A3. I use this scooter to get home from school and since the max weight limit of the scooter is around 100 pounds (I am 15, about 40 pounds over the weight limit). It also doesn't really help that I ride on the street / really bad sidewalk as well. So since I am over the weight limit, the wheels keep cracking.
@jeffwongdesign11 жыл бұрын
Now that you've had it on for a while, what do you think? Are the 110's worth it? Also, do you have a link for the ABEC7's that you're using?
@p1nesap11 жыл бұрын
Yes I think the conversion/upgrade is worth it, but others may not want to start cutting up their scooter to make 110s fit. If you like tools and tweaking stuff I'd say go for it. The link to titan_skater is in vid description. Great wheels.
@Tom-et2cd Жыл бұрын
Hey I was wondering is it possible to put 110mm wheels on a 200mm scooter?
@joshuabrown50578 жыл бұрын
Nice upgrade
@p1nesap8 жыл бұрын
+Joshua Brown thanks, upgrades are fun.
@p1nesap11 жыл бұрын
Glad to help man! Scoot on.
@vortecmob116810 жыл бұрын
Have you heard of pro to grippers before? They're great wheels
@p1nesap10 жыл бұрын
A bit pricey for my budget but thanks for heads-up.
@nathanwebb353110 жыл бұрын
proto***
@vortecmob116810 жыл бұрын
nathan webb I know, autocorrect's a bitch
@nathanwebb353110 жыл бұрын
haha yep I hate it
@johnbouttell58277 жыл бұрын
Heck
@proobuio9 жыл бұрын
Hey man, I just wanted to say because of you I bought a kick push scooter.. I was wondering if a 120 mm wheels could fit in this particular model? Hit me soon please and I really enjoy your video
@p1nesap9 жыл бұрын
proobuio unfortunately 120mm don't fit, just 110. If I had to do it again I'd get Razor A5 with 200mm wheels. Bigger wheels better cruising.
@lonevaultranger1759 жыл бұрын
You could try looking for a fork that can fit 120mm wheels but the fork will be threadless. With the razors like that they only use a threaded fork and threaded compression system.
@byronedmondson45838 жыл бұрын
+proobuio just get a 2016 envy prodigy these razors are shit
@knexextreme48508 жыл бұрын
Do you do stunt scooter
@Mrtrevbot2 жыл бұрын
Could you make a video explaining how to remove/reinstall the brake? I took mine off and cannot figure out how to get it back on. I can’t find any literature anywhere
@p1nesap Жыл бұрын
Watch the video dude.
@Mrtrevbot Жыл бұрын
@@p1nesap maybe YOU should watch the video haha you didn’t remove the brake.
@p1nesap Жыл бұрын
@@Mrtrevbot I just loosened it, didn't remove. I don't scoot anymore & hope you get the brake on 🤞
@allforit10110 жыл бұрын
yes and it wasnt clearing it by a couple of mm
@aldenw960811 жыл бұрын
I don't know if I would want to get it. Seems like a lot of work just to get 10mm more, and the scooter is missing some parts. Just got the 100mm and it's all good. I'll think about it, but just doesn't seem worth it.
@eelnats1711 жыл бұрын
how do you raise the brake? because I've been trying, and it doesn't seem to go high enough to let the wheel spin.
@tinwas_taken4 жыл бұрын
Fixing it because I think my wheel is the cause of my scooter being so loud when going fast
@lowered1810 жыл бұрын
A4 purchased , waiting on 110 wheels, :). I have a question about your a5 review, how fast where you going before wobble set it in, Thanks for the tips. , g
@p1nesap10 жыл бұрын
A5 wheel wobble is due to handlebars being too narrow for me. But it's not an issue for many people. Might want to check my updated A5 review: Razor A5 Lux Adult Scooter Review Thanks for watching.
@maybebabyny5 жыл бұрын
Thanks for this video. Im wondering if these would fit on my daughters A2?
@p1nesap5 жыл бұрын
Gee I wouldn't do it. The A2 is a rattly little scooter. I recommend upgrading to a scooter with higher weight rating & bigger wheels.
@maybebabyny5 жыл бұрын
@@p1nesap She is 6. Everything they make fot her size is pretty ratty. Ideally I would like to find a pair of air wheels that fit on it. She doesnt care about speed as much as a smoother ride.
@maybebabyny5 жыл бұрын
Update. I had to shave the wheels to have them fit but they are still miles ahead of the original tires.
@allforit10110 жыл бұрын
p1nesnap im having the same problem i cant raise the break pedal enoughto let the wheel roll. could u give a detailed explanation on how to maximize the break pedals height or maybe even a video, thanks
@p1nesap10 жыл бұрын
Hey, you loosened brake with hex key, then pulled brake up to max height, then re-tightened while holding brake in position, yes?
@MichaelHsuVideos10 жыл бұрын
Did the mod and figured this out: If you're not getting enough clearance, try riding the scooter and slamming the brake, which should bend the hex screw that holds the brake in place a bit more. Also, if you're trying this on a brand new A4, you need to ride the scooter and use the brake first, otherwise the hex screw will be perfectly straight and turning it won't have any effect on the brake height.
@jonahruffner79139 жыл бұрын
Hey so I have a custom trick scooter and it has 98 mm wheels can I put 100 mm wheels on there please let me know asap thanks
@bqilie9 жыл бұрын
You can
@jordantrinh570710 жыл бұрын
just asking why cant you just get a pro scooter
@RICKY-lw5xw8 жыл бұрын
how did you take out the front black pice
@MichaelJohn1307 жыл бұрын
madmofo100 did you figure this out? Any tips?
@chewdock889 жыл бұрын
may I have the other 110 u have tires on mine and it slow
@anthonyladuca81658 жыл бұрын
cool
@jackmarlon92948 жыл бұрын
you know you can get up to 125mm
@danielchais46038 жыл бұрын
Does the guy have a job?
@murderyurface35955 жыл бұрын
Danielchai S yea man! He ‘scoots’ there and back every day! Top dawg on the shop floor! 🤣
@lonevaultranger1759 жыл бұрын
One question why are you wearing a helmet on flat ground.
@BrandonSc0tt9 жыл бұрын
you want get a better cost if you use the same barring and the wheels and that scooter suck your not cool when you sat scoot