120Watt Bidirectional USB QC PD Module working

This is the 120Watt Bidirectional USB QC PD AFC Charging board testing and working video. 120Watt Bidirectional USB QC PD AFC board having a single USB C that can be used for both source and sink operations from the same USB C connector. It is very useful for DIY very high power power bank for any industries where the Battery connected to it could be charged using fast charging PD protocol and the device that gets connected via USB C could charge in very fast charging method.
Be it any phone or device, if that supports fast charging this module is suitable and make it covered.
Additionally this 120Watt Bidirectional USB Power Bank module qualifies the AEC standard for Automotive industries.
To Purchase this board, visit our online store -
punoscho.in/pr...

[@Ezio470]

Is there a version of this board for higher voltage li-ion battery pack? like 48v? my ebike battery is rated at 48v (41v-52v) and while i can power usb devices no problem i wished there was a board which could power usb pd laptop

[@vadymsoshchenko8721]

Hi, are you sure that this module support lifepo batteries? According to the seller page it’s forbidden to use iron batteries!

[@vadymresmin]

@punoscho2022 JFYI

[@sinisterwolf89]

Can you safely put these in prarallel on a battety pack to make a DIY powet bank for multiple devices?

[@koushiksarkar33]

Please answer my question🙏 can I attached 50,000mah battery 14.8 -16.8 volt battery? And How many mah support this board?

[@punoscho2022]

Yes you can attach 50000 mAH

[@pareshbhai7917]

Sir video hindi me banaye

[@kandavelkanagaraj939]

It does support laptop charging ? , can you share the realtime test video and how much amps pulling with the moudle ,can i connect 4s lifepo4 battery

[@papaisou11]

Yes you can connect 4S lifepo4 battery. And I charged laptop using this module in PD configuration, my MSI laptop had a PD charging port.

[@kandavelkanagaraj939]

​@@papaisou11Thanks , it will produce normal / heavy heat while charging laptop ?

[@punoscho2022]

The heat is nominal around 50-60 degrees. With that heat, it worked with no issues. Nominal laptop takes 40 minutes to charge fully where a 65W pd charger takes 20-25 minutes. We accepted this variation and it worked well as per customer record.

[@user-wj2ml4kn8k]

​@@punoscho2022 when will 100w module will come in stock

[@vadymsoshchenko8721]

@@papaisou11 are you try to charge your lifepo pack with this module?

[@aquariumjugad8484]

अरे मेरा रिफंड कब मिलेगा आपको कॉल नंबर भी नही हे (order id 11307)