(1213) Challenge: Cry BB Puzzle Picked Open

[@thorlancaster5641]

You were correct about the Duck tape sleeve, it was only there to prevent the lock from flopping around in the pipe cap. On pin 4, the master wafer is below the T-pin, not above it. I should have cut the groove on hole 4 a little deeper because the false trap pin did not work (until the plug was turned 180). That groove on pin 4 is **supposed** to prevent the core from turning unless the wafer is on top. Picking it CCW won't hurt anything, it just won't open. Nice picking job as always Bill.

[@chriscobble48]

Thor Lancaster since it wasn't talked about in the video I just wanted to say I appreciate how cleverly this was named. "Cry BB" being used instead of "Cry Baby" was really clever since you used the BB for the first pin. Bill interpreting it as "Cry Bosnian Bill" gave me quite a chuckle!

[@paratruk1]

thank you that was a fun one have a good year Jim

[@anonyMous-hn5yn]

Dear Bosnian Bill, you have been an amazing influence on my life, in such a positive way. I first got into lockpicking as a hobby because i was working third shift security, which i frequently had to help guests get back into their rooms or car. I started shimming doors with butter knives and coat hangers, after a couple months, i decided there must be a more gentle way. I found your channel, subsequently the LPLawyer, and it changed everything. Ive learned so much from you, and i love every video you have ever done. Thank you for everything, i hope you enjoy your retirement, you sure earned it. You will always be loved.

[@gsuberland]

Bill's cut-off expletive on battery failure made me chuckle :D

[@myreeflife7072]

Love to see these crazy locks!

[@bama4816]

Lol , love the "commercial break" lol.. nice

[@YellowQu4ck]

After watching several videos, I am beginning to think locks are nothing but peace of mind. I once thought a Master No. 3 was secure, but a novice like myself can pick them 😂

[@michaelladue5655]

When he said "click" AVE was the first thing to come to mind.

[@bensmith4563]

uncle bumblefuckis every where

[@trekmaster30]

So, I take it your camera cant plug into ac power as a backup or does the chord get in the way?

[@dsloop3907]

The cat powered generator is offline also.

[@WineScrounger]

D Sloop if you can get useful effort out of a cat... you’re a better man than me.

[@SgtKOnyx]

I find having a line in a circle that isn't the diameter to be in the way myself.

[@WineScrounger]

SgtKOnyx it’s too early to be that sharp

[@_BangDroid_]

Some camera's (like sony) can't be charged when in use, I know it's very dumb

[@sarnold1277]

Nice to add about personal preparedness on your site! I will check it out!!!

[@edgarvalencia3657]

The pin prevemts you from turning the lock, and.getting leverage on that back plate on the core.

[@trm96]

Grrrrrrr Bill! You forgot to show us the pins...

[@jeremiahkennedy1683]

Talk about a sleeper lock lol by the look of the masterpiece in hand and the closely healed gouge mark on your thumb, I thought you may of used something more aggressive but yet again it was a fair game challenge lock so... Great pick Bill!

[@jamhough22]

Pin in the plastic case is to stop it rotating when your picking it. And the tape to fatten the lock out

[@jezzamarkham5285]

Cool bit of picking considering the state on that core!! Ps. i just squandered my Christmas present money and ordered a "Madbob Double Ghosts pick Set". These are the first picks iv'e ever bought not made! I can't wait to try them out, fingers crossed.

[@RPRosen-ki2fk]

Those were the first picks I bought. I loved them, they were so much better than my homemade ones. Madbob can be slow shipping, but the quality is ... OUTSTANDING! I'm sure you''ll love them, when they arrive.

[@jezzamarkham5285]

R.P. Rosen Thanks for the comment. The picks arrived from Madbobpicks.co.uk in 5 days and i ordered them just before "New Years Eve"!! I guess i got lucky with the mail. I've used them every spare moment I've had and sure enough they definitely have an edge on my homemade picks and are well worth the money. I'm so glad i found Bill's channel as for me it's like "Alladdin's Cave"!!! Pick well R P.

[@dannyboyz7061]

I'm new to picking. What would be a complete and excellent picking kit and where would I get it?

[@jamesmurphy8014]

Great pick with some weirdness in the pin department lol! Thanks for the video!

[@dmizer]

I'd like a good look at the pins.

[@hardcodedsoftware4212]

I got a KZbin notification for your comment

[@dmizer]

The Smetxy I replied to your comment in error and deleted it. My mistake. Sorry.

[@hardcodedsoftware4212]

Dale Wark , 😂 don't worry about it, I was just a little confused

[@4lifejeph]

What was that plastic cap that the lock was in used for?

[@hardcodedsoftware4212]

Why does bill not just use bottom of the keyway on this lock?

[@bosnianbill]

Oh SURE, that would have been EASY... But when have you known me to choose the easy path? Besides, when someone says "you can't do this", then I REALLY want to do it. Pure, 100% stubbornness. That's all it is.

[@TheWham083]

The Smetxy, Thor threw down the gauntlet and Bill said "I don't want your stinking gauntlet".

[@peaceandllov]

The Smetxy Spoiler alert 🚨

[@hypernovie]

to learn you the tool that deals with just that problem.

[@Zodliness]

The most motivational part of any challenge, is someone shouting "I bet you can't do that"

[@aliceinmadseason2319]

So if i just put a ball bearing in one chamber instead of a driver pin what difference would it make?

[@bosnianbill]

It would widen the shear line of that chamber, making it much easier to pick.

[@aliceinmadseason2319]

Bosnianbill sweet, then i won't be disappointed. This must be how my gf feels

[@larryg7336]

A little rustic, but hey you opened it. HAPPY New Years to you too Mr.Bill

[@timjackson5555]

Happy New Year Bill. !! Putting those Souber Picks to work. we don't need no stinking 🔑

[@raincoast2396]

Stay legal... STAY WARM!

[@markadkins9290]

Very composed for 28,thanks again Happy New Year!

[@cardiffpicker1]

I know it's a bit off topic but has anyone got information on slick locks van door lock? They look like a good design but curious about pick resistance .

[@s1283]

Bill, been watching for about a month and a half now. Relatively new to the pick scene. Picking it up more as a useful hobby, for work and “my govt job”. Maybe you have done this already in the many videos I haven’t yet seen, but would love a BB’s hand picked pick kit, maybe you have a one company “set” you perfer, but so far I’ve gathered you hand picked various tools you have in a carry or go-to set. Would love to see it! Thanks and look forward to more in 2018!

[@BeeSting862]

Look for video no 985 for the LockLab Toolkit.

[@s1283]

Peter Hawkins will do thanks!

[@AlbertLebel]

Thanks for getting a challenge lock done in the cold Bill. It’s 19 here in Shawnee Oklahoma. Happy New Year Lock Lab.

[@jeremybrown7475]

Albert Lebel just drove through Oklahoma last night yeah pretty cold there headed back to Houston from Colorado

[@RPRosen-ki2fk]

We've got NEGATIVE ten in New Hampshire ... BRRRRRR.

[@AlbertLebel]

R.P. Rosen oh my God. Then I don’t have it so bad. Be careful.

[@RPRosen-ki2fk]

No you certainly don't, I would gladly trade with you. They're calling for -20 this weekend. I don't know why ... I live here. LOL

[@mikeburdi3464]

Nice video Bill, cool intro, good pick as always. Happy New Year to you and your family, and also to the whole lock lab family!

[@koloec94]

Do u buy challenge locks?

[@anonyMous-hn5yn]

"but it worked, you cant argue with success"

[@charlesmckinney]

Bill, you're slicker than yellow socks on a red rooster.

[@BeeSting862]

Happy New Year Bill.

[@Mr1234Lego]

Peter Hawkins i

[@robertclark3258]

Happy New Year, sir. I am always and completely amazed by your picking skill! Amazing!

[@4X4F250Diesel]

What is the name of the music during the break

[@turgsh01]

but but but... I wanted to see that funky 3rd pin... you said you'd show us the pins. :'(

[@SgtKOnyx]

That pin was probably too keep the lock from rotating inside the sleeve.

[@paratruk1]

that was fun thank you Jim

[@applecider5846]

What a hodgepodge of parts. Great pic as always Bill. Happy New Year Everyone...

[@jamespack8366]

Awesome as always Bill

[@MrSpaz1969]

bill the wife won't give you a room to pick in the house lol

[@janmeurer4334]

Trying to rake??

[@Kraken1000]

Buy a heater! It's currently 39°F in my corner of the UK.

[@idkidk4334]

Kraken1000 -4 where I live

[@Zodliness]

Ever thought of running your camera on a power supply or external battery pack?

[@WineScrounger]

Modern Leveller this would work if it’s got the ports for it. Just plug in an eBay special USB power pack and I bet it’ll run for days. I always keep one when travelling in case I’m stuck in the airport with no power.

[@bosnianbill]

I do have several extra batteries for that darn camera. Problem is, when you plug power into the camera's charging port, none of the controls work. I really need to take one of the cameras apart and figure out how to connect an external battery to the internal connections...

[@WineScrounger]

that’s a nuisance. Paging Big Clive, he’ll have an idea I’m sure.

[@ovalwingnut]

Thank you for the 2018 video! BTW, recommend a thorough Purell© "treatment" post-picking... (that's what my mom use to tell me:) Cheers!

[@philliphealey7573]

happy new year Bill keep vids coming sir

[@DogsBAwesome]

living in temperate soggy UK has its advantage in the world of mega-weather

[@Itsa_Mea]

The pin he had in the outer shell was just for alignment purposes.

[@kmg501]

I think it was more to keep the cylinder from rotating in the sleeve.

[@kmg501]

Jimbo, Agreed.

[@Itsa_Mea]

kmg501, yes, we are saying the same thing. The pin holds the inner lock assembly and outer shell case aligned, so the lock tab can engage in the slot of the outer shell.

[@edgarvalencia3657]

Jimbo alignment is not a challenge.to do....

[@Rb-hm5mliu]

Happy new year bill!!!

[@dsloop3907]

Due to the national outrage of LockLab watchers having to endure a camera failure during recording of a gutting video, BATTERIES FOR BILL ( BFB ) will immediately begin taking donations to make sure this never happens again. Look on the LockLab website for further instruction. BFB thanks you. LOL. j/k.

[@bosnianbill]

I don't NEED more batteries, i need a schematic for the darn Sony Cybershot camera so I can wire in a huge external battery pack...

[@dsloop3907]

www.ebay.com/itm/AC-Adapter-Power-Supply-For-AC-LS5-Sony-DSC-P8-DSC-P10-DSC-P32-DSC-P41-DSC-P52/172627044451?hash=item28315fa863:g:ztoAAOSwWkJY8mXn

[@aliceinmadseason2319]

Happy new years everybody

[@shawnhickman8672]

Nice pick on a nasty looking lock.

[@shaunozzyoz425]

H . N . Y Keep the awesome videos coming cheers S.

[@Rosa_AI]

every day hundreds of camera's die cause they forgot to recharge the battery,donate now and you can help save a camera from losing footage!

[@gregoryfiach1970]

hi guys, just wondering if anyone had a promo code for sparrows? much appreciated.

[@toomdog]

Who ever heard of picking a lock closed

[@RobinPillage.]

cold as a witch's tit all the way down here in south Louisiana, I know it has to be cold up there. Happy New Years ol boy

[@Drunken_Frog_40000]

Try TOKOZ GAMA PRO padlock :)

[@nukenvy2]

Try using AvE’s trick to keep the work bench warm with a oil pan heating pad in a cold workshop or garage. kzbin.info/www/bejne/fXPPdWONp6uAgac

[@keld101]

Fake! I saw the jump cut!

[@thekingofsteel4413]

The ugliest Core I've ever seen 😂

[@markjohnston-st8cn]

2

[@robwhite560]

3st

[@chriscobble48]

Rob White 4rdst

[@TheWham083]

1st