WHEN BUYING XT60I CONNECTORS ON AMAZON! Please check the description or reviews to see if center pin is connected to the negative. Most of xt60i connector including mine was listed as xt60i but center pin was not connected. But there are some out there!
@Sylvan_dB2 ай бұрын
Or connect it yourself when you put the connector on the wires.
@derf_the_mule14052 ай бұрын
I highly recommend fuses to prevent damage to your vehicle and wiring. The EcoFlo units with the Orange (not yellow) XT60i connectors charge at 8A with the i pin open or shorted to positive and 15A when shorted to negative. This can be confirmed with the XT60i car cable and MC4 cable.
@gunwiththewind2 ай бұрын
Thank you for the comment! And yes i did add the inline fuse to my final installation.
@AndrewMoizerКүн бұрын
What a solid solution. The ‘solar’ charge controllers are DC/DC converters after all!
@ennybm2 ай бұрын
I had been thinking about this for weeks but you did it first! Great job, thanks for sharing
@gunwiththewind2 ай бұрын
Thanks for your comment. I will try to upload update video sometime this week.
@johnmal59752 ай бұрын
Very clever. I am going to get the pecron car charger it can be used on any power station. It charges up to 500watts which is enough. You can lower it as well and its 142 bucks with the discount out the door. I would do this I just don't trust myself. Lol great video!!!
@NigelNaughton2 ай бұрын
I'm having a hard time finding one.
@johnmal59752 ай бұрын
@@NigelNaughton Go to their website.
@NigelNaughton2 ай бұрын
@@johnmal5975 yeah they are on backorder. Shipping sometime in August if they were ordered before July 15. If not they have no idea when they will be available again.
@gunwiththewind2 ай бұрын
Thanks for the comment. As long as powerstation is rated for solar panel input I think it should work no problem. If your Pecron power station uses XT60 for solar input you don't need to buy xt60i connectors. and if it does use xt60i cable check if center pin is connected to the negative. Because my connector was listed as xt60i connector but it did not have connection between negative and center pin.
@johnmal59752 ай бұрын
@@gunwiththewind On the pecron car charger they have mc4 connectors just like a solar panel has. So whatever you connect solar with normally you use as if you were using a solar panel.
@jimmay86272 ай бұрын
This also makes using external 12V batteries for capacity expansion 2x as practical. Nice!
@SirJamez02 ай бұрын
Smart thinking. I've been looking to do something similar, except i have the Delta 2 and the River 2 Pro that only have one XT60i so i will need a 12-24 converter to make it work. I would advise checking the temperature of your alternater after charging for a while to make sure it doesn't overheat, it may reduce its lifespan.
@gunwiththewind2 ай бұрын
My oe alternator was 80 amps. I upgraded to 140amps and only pulling 30 more amps from charging the battery. I haven’t checked the temperature but i think it should be fine. But i will take your word and check it before my next roadtrip next month
@harveyhenry35982 ай бұрын
Yep, and with a separate 12-24 on each input of the D2M we would see 800 watts total input/or same as the EF alternator charger.
@kirok31842 сағат бұрын
"I 'believe' the square side is the positive..." I guess you'll find out pretty quick.⚡
@leadfarmer732 ай бұрын
This is BRILLIANT my brother!!! Wowwwww BRILLIANT!!! 👏🏽👏🏽👏🏽SUBSCRIBED!
@gunwiththewind2 ай бұрын
Thank you so much for your support!
@CristianMatos2 ай бұрын
Man, great job!
@gunwiththewind2 ай бұрын
Hey, thanks!
@FindeichlustigАй бұрын
Guys!!! With so much power in a 12 volt car system you have to be careful with the thickness of the cable. With 400 watts and only 12v, the cable has to be a certain thickness depending on how long the cable is!! Please always use a cable thickness calculator from the internet!! Otherwise, if the cables are too thin, a cable fire will start!! And your car could burn down!!
@gunwiththewindАй бұрын
Yes. I did use online calculator. Each cable transfers 200w to each port not 400w. I got two set of cables connected to ecoflow each port receiving 15amps. Calculation shows OFC 12gauge wire thickness. Ran test for couples weeks now everytime i drive. Wire temperature is barely over ambient temperature. On most newer cars, cigarette jack can roughly output 150w-200w and i know for sure those wires are not 12gauge.
@FewerOptions-mx7qt22 күн бұрын
@gunwiththewind yep 12 ga is plenty you could even go with 14 ga. 12ga is good for 20a and 14ga is good for 15a in conduit.
@derrickboatman15608 күн бұрын
Yeah voltage drop calculator would be handy not a bad idea to put an inline fuse on there either
@AndrewMoizerКүн бұрын
@@gunwiththewindCould you plug in the cigarette lighter charger as well as the two ‘solar’ ones? To get a bit more (although I think this solution gives more than enough for most use cases anyway).
@MicahsRants2 ай бұрын
Thx for this work around 💪🏽💪🏽
@gunwiththewind2 ай бұрын
No problem!!
@jasenhenry2 ай бұрын
probably want to oversize cables of that length. and as others have mentioned, fuse the hot nearest the power source for safety
@gunwiththewind2 ай бұрын
Yes for final installation i did install inline fuse near the battery. After putting in wiring information into online calculator 12gauge was sufficient.
@keithbrookshire2 ай бұрын
Subscriber #301 here. Thanks for the Ecoflow hack!
@gunwiththewind2 ай бұрын
Thank you so much! I have it fully installed in my car now. I will try to make an update video this week. Thank you again.
@derrickboatman15608 күн бұрын
That's a good video
@gunwiththewind8 күн бұрын
That’s a good comment
@nickknack58842 ай бұрын
I would add an inline fuse to those lines for safety. Size the Fuse to the wire size. if the keep popping then you will need bigger wire for bigger fuses.
@gunwiththewind2 ай бұрын
Thanks for the comment. I did use inline 80amp fuse for the final installation. Thank you
@tonyinfinityАй бұрын
I bet your heart stopped for a second after the screen turned off when you were checking if it worked.
@KrizAkoniКүн бұрын
I use that relay in my setup and have it wired so it only engages when the car is running so I don’t accidentally drain my battery. 🤓
@samuelfox8126Ай бұрын
Simple genius
@toddincaboАй бұрын
👍
@leeharkins64772 күн бұрын
Why not connect a Honda generator?
@Robert313522 ай бұрын
Good video. I already purchased the EcoFlow 800 charger, so I am behind the curve. I was wondering if you could show how you can daisy chain the ecoflow battery to another solar generator while being charged from your alternator. In other words, charge two solar generators at the same time. Thanks. I subscribed!!.
@gunwiththewind2 ай бұрын
Thanks for subscribing to my channel. Currently ecoflow is my only powerstation. But if you want to charge two powerstation using same cable, i would splice into my current charging cable and put connector on it. Since xt60 is rated for 60 amps and i am only using 15, i dont see any problem doing it this way.
@Rock-Bottem19822 ай бұрын
I'm concerned about the massive added draw you're pulling from that alternator if you're wanting to drive and charge at the same time, as that charging system is rated to handle the electrical demands of the trucks accessories like the A/C system, the defrost, lights, computers etc... Trying this on a newer vehicle with way more power demands can cause some serious damage to your cars electrical systems. I don't recommend doing this
@gunwiththewind2 ай бұрын
Yes you are right. Many people don’t realize how much their alternators can handle before installing other accessories. My OE alternator was rated for 80amps and checked draw with clamp meter showing ~50amps, 60amps with everything on. In order for me to do this i did upgrade my alternator to 140amps ahead of time. Also i used manual isolator so i could charge my battery when i am not using other accessories.
@Purinelz2 ай бұрын
Great idea. By any chance did either the cables or the converter emit sufficient heat to be concerned?
@gunwiththewind2 ай бұрын
No it did not. I will make another video of my install. xt60 is rated for 60 amps. I am only running 15amps on each connectors and my wires are full copper and thick enough for 60 amps.
@stevenshircliff3932 ай бұрын
Outstanding! How can I make this work on a Delta pro?
@gunwiththewind18 күн бұрын
You can do this exactly the same way. Sadly delta pro only has one solar connector with 15amp max and it will take forever to charge delta pro. You want to incorporate voltage changer to make this work more efficiently.
@stevenshircliff39318 күн бұрын
@@gunwiththewind Yes, have 12v to 48vdc converter. Get 720W coming in to Delta Pro
@tommo97572 ай бұрын
I would suggest watching Gadget John's experience with ecoflow in his van build before buying/ installing anything
@upinya52233 күн бұрын
Now find out what that ticking in you engine is,
@tonyinfinityАй бұрын
I know you said an inverter has an efficiency problem but who cares if the truck is running. you can charge at 500w, 750w and so forth with an inverter. It's better than 400w
@gunwiththewindАй бұрын
My old setup i had to install inverter in my cab and fan ran really loud and alternator I had i could only do 400-500watts on inverter anyways. If alternator can support bigger inverter i would have used inverter setup again. But point of this video is to do it cheap without purchasing other equipments.
@story12342 ай бұрын
Hi can you explain why you didn’t use a battery isolated and then hook up the wires? I don’t really understand
@gunwiththewind2 ай бұрын
This is my test run. Just to see if i am getting 30 amps between two lines. For the final installation i did use relay to isolate two batteries. I did not use automatic battery isolation because i want to turn it off when i am using other accessories. There are some that can be by passed using a switch but couldnt find the information about duration of the bypass.
@Nickleg26 күн бұрын
@@gunwiththewindWhich relay did you end up using? Link? Thanks
@gunwiththewind12 күн бұрын
search on amazon “irhapsody 200amp relay” i over sized the relay for safety reasons.
@alexanderolivera77042 ай бұрын
What happens if you just connect one xt60i plug?
@gunwiththewind2 ай бұрын
Since ecoflow limit each solar input at 15amps. I will only average around 200watts with single connector.
@simon3592 ай бұрын
I wonder if I can do this on my Anker?
@gunwiththewind2 ай бұрын
I don't see why not. If Anker uses regular xt60 instead of xt60i then there is no need to modify the cable.
@Mmmmmmmiwish2 ай бұрын
Mmmmm im confused. Ive seem someone on here charge their ecoflow delta with the eco 800w charger from a battery with no alternator ,, so just a battery and still get 800w
@gunwiththewind2 ай бұрын
Your cars alternator is controlled by ECU to produce amount of charge depending on the load you are putting in the system. If the load goes over the amount that alternator can produce you will probably blow fusible link between alternator and the battery to prevent your car from burning down or damaging electrical components. Without alternator you don’t have to worry about producing charge for your battery and your car burning down from overloading alternator. So it can run as long as battery has enough power and keep up the voltage. Most of the car starter battery can’t run 800w for long time without proper alternator because voltage will drop under 12v and ecoflow alternator charger will shut off. It makes more sense to use if you use deep cycle battery.
@gunwiththewind2 ай бұрын
There are ways to run full 800w with small alternator but it will cost more money. 1. Buy auxiliary deep cycle battery. 2. Buy DC to DC charger to control the charge into auxiliary battery. But it will only work until your auxiliary battery has power. Since 800w 12v is 66amp and most of the deep cycle battery is 100amp. With 20amp dc to dc charger your system will work for about 2 hours or less while your car is on. Or Just lower the charging speed on ecoflow app according to what your alternator can produce. And at that point is alternator charger really worth it?
@TheOffroadCamper20 күн бұрын
What you’re doing with work but your alternator is no longer charging your car battery only the EcoFlow so eventually your car battery will go dead
@gunwiththewind18 күн бұрын
Thanks for the comment. I made second video to show how everything is getting charged with amp meter. If what you are saying is correct, charging ecoflow with cigarette jack port or installing bigger sound system will kill your battery but it won’t. All your electronics are powered from your main car battery. Your cigarette jack port is connected to the battery same way as my set up.
@gunwiththewind18 күн бұрын
I just want to make it clear, your ECU determines how much amp to generate from your alternator based on the voltage of your system. When running more electronics on your vehicle offroad lights, sound system, AC, inverters, etc will make your voltage drop. When ECU detects drop in voltage it will cause more resistance on the alternator to generate more amp to raise the voltage. As long as your alternator can supply the amp that is required it will keep your car battery around 14v.
@StephanLabrecque2 ай бұрын
You should use 8awg wire. 12 is to small. Be carefull!
@gunwiththewind2 ай бұрын
Maximum wire gauge thickness for xt60 cable is 10 gauge. After doing calculation 12gauge wire was sufficient for my install.
@TheCornucopiaProject-bd5jk2 ай бұрын
Considering that you use 2 cables, you only increased charge rate per cable from 12v 8A to 24v 8A
@kirok31842 сағат бұрын
Leaving metal tools on top of your battery? C'mon man.
@drillsergeant6232 ай бұрын
Umm charge it from your outlet at home, 120V. Come on now
@gunwiththewind2 ай бұрын
Thats way too easy haha
@leebritton30192 ай бұрын
What if you have a power outage?
@ikipearl2 ай бұрын
Iota makes nice small chargers
@Bigbriansc13 сағат бұрын
You can buy stronger alternators. 220,280,300,350, even 400 amps.