12v Pressurized Water System Demand Prius Stealth Camper Shower Pump Van Car Sink Vanlife 12 Volt

I build a compact low power on-demand auto shutoff 12v pump water system for my Toyota Prius. Can be used in any small space. Can easily be removed and transported. Can change attachments for handheld sink to outdoor nozzle with various spray patterns.
Here is a link to my website where I give you links to purchase all the parts you will need for this project:
priusstealthcam...
Water Pump: goo.gl/LbtNBf
Dometic Fridge/Freezer: goo.gl/bGuu8T
Prius Stealth Camper build video: • Prius Stealth Camper B...
Electrical panel video: • Prius Stealth Camper -...
Bed Build: • Custom Fit Bed Build, ...
Privacy Curtain Build: • Light Blocking Privacy...
Website: PriusStealthCam...
Closed Captioning and Translation: Filipino, Swedish, Russian, French, Chinese, Dutch, Indonesian, German, Hindi, Spanish, Irish.
** WARNING: Do not attempt any electrical work shown in this video unless you have automotive electrical experience. Electricity is dangerous and could harm you and/or your vehicle. Proceed at your own risk **

[@151mcx]

Pro Tip, when using that metal clamp, put some electrical tape or cut a 1" of the hose cut a slice in it, and wrap it around the existing hose so that it won't eat through the hose and cause a leak.

[@larryh3987]

Omg, I can't believe you actually did this back in 2017. I completed a similiar set up with a 2.5 gallon jug of water to a USB powered pump, then I connect the pump to a garden hose and that's all. Battery power, mobility, leak proof, and small foot print. The most difficult part was finding something to connect between the pump and the garden hose without leaking and I used a O-ring in the 3/4 to 1/2 adapter and it did the job. I'm so thankful that technology came a long way and people out there actually thought of way to make our life easier ;)

[@thebestisyettocome4114]

There is simply no other way to say it...This gentleman is a expert on the subject of car camping in a Toyota Prius. Period. The videos are done with a true understanding of knowledge and experience and thought. Five star rating 🌟.

[@timdillen]

1 E L M E R You are very kind. Thank you!

[@warrenkawamoto8660]

Did you seal the top opening of the water container? Don't. If you do, a vacuum will be created in the container, which will collapse the walls. Instead, insert a piece of tube as a snorkel so that air still can go inside. The height of the snorkel will prevent water from spilling out.

[@Beach_Guy]

I have been researching different water system setups for camping / boondocking & this 5yr old video popped up in recommended, which is by far the best one I have seen. I am rolling with this setup. The pressure is what sold me. Outstanding bro this is brilliant👋👋👋

[@manuelgracia8488]

People like You is what this world needs. Thank you for your simple & ingenious project. Love to you and your camping journeys.

[@wildbill463]

Just watched two of your videos and like how you show each and every part you are using and where you got them, they were easy to follow and that is great for some of us older campers. Thanks

[@timdillen]

Stewart Billingsley Thank you for your kind comments. I’m glad to hear you found them helpful. Thanks for watching!

[@janellehouillon9067]

Vanlife is my someday dream, but I have absolutely NO skills except for sewing and I want to self-build if I can. I have watched a million videos to get the how-to of what I want to do. This is exactly it! And you have put into such perfect layman's direction that even this old lady can do it. This set up is perfect for how I want my fold away shower. Now hopefully I can find a video to help me incorporate the exact same idea into just a home made copper pipe sink faucet with a with just a garden hose hand turn valve - I have no idea how to work the mechanics of that! Thank you so much for doing this video!!!

[@a.w.thompson4001]

Than you for showing the process in such detail. Seeing the potential problems at each step, and how to counter them, really makes this accessible to viewers with no experience. Your Prius and other expertise and teaching ability are outstanding. 👍👍

[@wendyfahmie7608]

II am impressed with your ingenuity, so I subscribed! Using a hair dryer to soften the hose is a good idea. When working on my yard drip system, I soften my 1/2" and 1/4" drip hose in hot water in a tea kettle to get it to go onto barbed connectors without a struggle. Squeezing the hose onto the barbs makes a better connection, but I need to wear a glove to protect my hand from getting burned.

[@timdillen]

Thank you - glad to have you here! The hot water idea is definitely better than the hair dryer - a lot faster. Thanks for your tip!

[@Tanja220]

This is why we love U tube , geniuses like you 😊

[@ismailibrahim1469]

Your the best I've seen ever in terms of how to do something.very patient and wonderful kind soul thx a lot

[@timdillen]

Thank you for your kind and encouraging comments - I really appreciated them. Thanks for coming along!

[@kenwatson7815]

10 out of 10 for easy to follow instructions, excellent viewing and narration, thumbs up for sure

[@SouthernPatriot1]

You could spray paint the container black as well and place in the sun. Really inventive ideas!

[@timdillen]

That's a great idea!

[@jadasb25]

Chalk paint or milk paint would be less toxic than regular spray paint...

[@ScottyToaster]

Excellent ideas and a well explained video. I see this was made about 3 years ago. Would you mind doing an update to let us all know how your invention worked, and if you made any changes? Thanks!

[@smithsmith5290]

Car camping level : Expert :)

[@timdillen]

Stephanie Smith Awe Thanks! It was a challenge. Glad you liked it.

[@trevorhartley5166]

Stephanie Smith is

[@debslifesimplified6406]

I love your way of explaining, your voice is very clear and the filming is great. I am in the process of several projects getting ready to go on, you have helped me to see what I need to get to get my submergible pump going.

[@timdillen]

Awesome! Glad you are finding the videos helpful. Thank you for your kind comments.

[@betitonator]

You’re a man of vision! I’m impressed. Thank you so much for filming and sharing.

[@timdillen]

betitonator Thanks for your kind comments. It’s fun to share my gadgets and adventures with people like you. Thanks for watching.

[@user-bh3ew6ii4g]

Dude, you are brilliant! You've earned a subscription from me. I'm going to try this for my SUV camping conversion. Now I'm excited to watch more of your videos.

[@timdillen]

Thank you for your kind comments. You will have a blast converting your SUV. Perfect time to do it.

[@user-bh3ew6ii4g]

@@timdillen i think I will have fun doing it. But even more fun using it afterwards. :) There are just so many possibilities that it's hard deciding exactly what to do.

[@jessicachen5682]

I've watched a few of your videos, and I'm so impressed by your thoughtful attention to design and rigorous testing! Thanks for sharing your process in such helpful detail. Keep up the great work!

[@timdillen]

Thank you! Glad you are finding them helpful. Thank for your kind comments!

[@user-cr4se9yb7n]

Thank you!! This helped me with some road blocks I was facing. I built the same thing except I used a kitchen sprayer with a brass quick disconnect instead of the hose attachment. I have everything hooked up to two 6 gal water jugs with quick disconnects that I modified to lay down in the spare tire bay of my Grand cherokee.

[@lonestarlaurel8620]

Awesome! You nailed it! For me and the rest of us out here. Your How-To videos are so relevant and easy to follow. Good job, well done. Thanking you!.

[@timdillen]

Thank you for your great comments! So glad you are enjoying the videos and finding them helpful. Thanks for watching!

[@davesworld7961]

You have some of the best instructional videos I've seen. Always very thorough and full of little helpful tips.

[@timdillen]

So glad you are enjoying them. Thanks for your awesome comments and for watching!

[@Stephanie9959]

Going stealth in a Prius! Seriously that is amazing and this water system rocks. Thanks for all the hard work. You know alot of us would just buy these from you.

[@longhairmullet]

Stephanie Guilmenot yep agreed, you build it and they will come.. or purchase on etsy or something :)

[@KeeperOfKeys22]

I appreciate your existence and your content!

[@DougGreene]

Been going through a lot of your videos. Dude ... you are one of the more creative DIY'ers I've seen. Really nice work on this.

[@danfulcher5485]

I predict you're gonna have a ton of followers. Content is interesting and original, production is detailed, editing is superb.

[@timdillen]

Thanks for your encouragement and kind comments and thanks for watching!

[@jessicagypsyjane]

I just came across your KZbin Channel as I own a 2007 Toyota Prius. I was going to BUY a Honda Element for camping and now I don't need to! This has been a total game changer this Saturday Morning. If I can do what you have done I am SET!! Thank you so much for posting these videos. I don't know how the electrical works with this Prius so I am going to have to learn, but thank you.

[@timdillen]

Jessica Sampson I’m so glad I could help! They sure don’t give you much for trade in on a gen 2 Prius that’s for sure. The Prius would be a cheap way to get started. The Element is great for space but I love getting the crazy good mpg. Thanks for your kind comments and for watching!

[@jessicagypsyjane]

I am learning so much, the reason I am so excited is because I love the Prius mpg and what it can do, and I don't even know everthing yet, but I will learn and this is exciting. Thank you for responding and I look forward to seeing all you have accomplished with your prius, this is a whole new world.

[@scott.wallace8625]

Building the same thing for my boat. Pointed me in a better direction. Thank you

[@willnettles2051]

Great lubes for pushing on the tube is either vaseline (or lithium grease) or temporary slippery is Windex. Ammonia is basic (opposite of an acid), a property of bases is they are slippery--however, when it dries it's no longer slippery. With ammonia or Windex, there's usually not much residue left, so it won't get slippery again if gets wet. I don't know if it would be good for drinking water, but for this I wouldn't hesitate. Nice project. Thanks for being our guinea pig...

[@timdillen]

I didn't think of that, would have helped!

[@raymondharris7226]

This was so AWESOME, I truly appreciate this. I have a ton of IDEAS since seeing this. I am very grateful...

[@ronwasser4852]

I like the way you do your conversions and how you actually put the finishing touches to your work. Have been following your channel for a few of your videos now. Great videos.

[@timdillen]

Thank you! Glad you are enjoying the videos and thanks for subscribing!

[@toefurcub]

Boil water for the tube to expand it's easier than hair dryer.

[@name.terrie]

If you didn't want to have two sprayers...What about just taking the outdoor spray nozzle off and stick it in something to catch or absorb the water left in its head, then just turn the flow regulator to closed. Then all you have to do is put that spray nozzle back on and adjust the flow regulator to allow flow again. A great product for camping fixes is Sugru. If you don't know about it , you can get ideas online. We love it. That is what we'd try for dealing with the spaces in the lid / hose. Thanks again. Now back to finishing watching the rest of the video.😁

[@timdillen]

Thanks for the ideas! I will have to check out Sugru. I have not heard of it.

[@name.terrie]

@@timdillen I cannot wait to see what you do with it 😉 I seriously think you will love it. Best wishes!

[@timdillen]

Just watched the video on it - very interesting!

[@bencuraza5045]

GREAT Idea; project which resulted in a VERY NICE boon-docking necessity for cleanups and a convenient shower. Also, your Vid is well presented step by step and what to anticipate resulting in your message being clearly received. Too many times other channels are NOT well thought out losing confusing the viewer. Thx for Sharing and I look forward to many many more. :))

[@timdillen]

Thank you for your kind comments. This turned out to be a great little modular system that is easy to put in other vehicles. I try to be detailed but sometimes I get engrossed in a project and forget to stop and include everyone. Glad you found it helpful. Thanks for watching!

[@33tarot]

33k views. Getting my 2007 Prius this November. Excited!!

[@rstevewarmorycom]

Yup, you need an inlet vent in your water tank to let air in as the pump sucks out water.

[@egn83b]

If you want warm water you could always run some tubing inside a black plastic bag in the sun on your roof and cycle it back in to the water container or heat up a quart of water and dump it back in the container. The one thing about having stuff under the seat on the floor its great in the summer for keeping food and water from getting hot even when the car is 120 degrees inside it very insulated area.

[@timdillen]

Sounds like an interesting project!

[@latebloomer3133]

That was awesome built! Thanks for step by step instruction.

[@timdillen]

Glad you liked it. I like how modular and portable it is. Thanks for your comments and for watching!

[@pskcatlet]

I'm going to try this in my kitchen in the van!

[@timdillen]

pskcatlet Awesome! Let me know how it turns out.

[@MotoM1234]

Didn’t understand the Flow control valve until you switched heads…thx…

[@gsdls]

Great video. Thank you.

[@carlitos.593]

Man!!! Thanks for this awesome video. I definitely going to add it to my SUV Camper conversion

[@timdillen]

Cool! Hope it works out well for you. Thanks for watching!

[@bmwproboi05]

Thanks for the detailed video! I was thinking about doing this instead of a pressurized container

[@timdillen]

I thought about the same thing. This one is modular and can fit in odd places by selecting any type of container available. The pump fits in small places too. Glad you liked the video, thanks for your comments and for watching!

[@Vera-dc7my]

Fantastic. All questions answered in this video. You thought it out and delivered it beautifully. Thx

[@ericmarks6322]

You could get a 12 volt cup heater that you drop into a cup of water if you really need to heat the water for a shower. Just a thought.

[@whyh]

You have a MICROWAVE in your Prius???!!! You're amazing!

[@timdillen]

Thank you! Yes I like to travel with all the comforts!

[@longhairmullet]

William Ho im going to look for that video set up next!

[@CallMeFil]

@@timdillen what about a pressure cooker? Lol

[@jakeluna6178]

Thank you very much for all the videos. I will be applying and adjusting to my 2001 Toyota Tacoma

[@timdillen]

Cool! You will like having the extra room, will make a great conversion! Thanks for posting and for watching!

[@tkevin849]

We are the manufacturer of micro pump.same pumps.great video.

[@timdillen]

Cool. It's working well.

[@tkevin849]

PSC Camper Conversions you can try ours if possible.we are hope to do it.may I have your email or Skype ？

[@longhairmullet]

Slimeline Beverage Dispenser. Lol , they should reconsider that name... great DIY video, I thank you.

[@skrongo]

Now you just need plumbing to drain that water out stealthily 😁

[@norriscoleman3141]

GREAT Car, Van or Truck dweller shower hose

[@timdillen]

Thanks for your kind comments. It was a tough project but turned out to have a lot of flexibility. Thanks for watching!

[@imaudm]

So you can heat water on hot plate or in microwave and pour it in the slim line tank for shower

[@laurajphillips5981]

Love your instructions, very useful Thank You!

[@timdillen]

Glad you enjoyed the video. Thanks for your kind comments and for watching!

[@mytakeonhowto]

Very inventive! Great build! Thanks

[@kare5525]

Wow! This is the best. So very glad that you engineered this solution and shared. Looking forward to your next video!

[@timdillen]

KaRe Thanks for your encouraging comments. I love tinkering. Even better when there is someone who appreciates it. As a KZbinr said, “The Prius is Legos for adults.” Thanks for watching.

[@RolandoNispiros]

Appreciate the step-by-step!

[@greateralexander]

Incredible pointers. Thank you. Gonna try this.

[@timdillen]

Greater Alexander This turned out really well. I am adapting this to another vehicle and it’s easy since it’s small, modular and scalable. I think you will like it. Thanks for your kind comments and for watching!

[@Environmenthrall]

Thanks for the walk-through!

[@mcanultymichelle]

You could always keep a baby diaper underneath , just in case it decides to leak when you have it in your car.

[@mariad4183]

Great info and tips! Thank you for sharing honey! xoxo

[@augustaanderson4046]

This is amazing! Thank you so much. Getting ready to use this for my build

[@gladtidings4all]

Great job! Great tutorial! Thanks!

[@dagotommy4037]

Good for off grid showering but planet Fitness for the concrete jungle

[@singhmaster4]

There is a better idea and save all the building. Submersible pump with a shower head or kitchen sink head. Charges with USB car charger. $30. Drop it in any container and push button to start.

[@DreamMachineX]

Wow, that’s cool. Can you share the link for it?

[@wanderlostrvr2582]

Had trouble with the pump. Not enough pressure for my hose sprayer seemingly. Plus the usual leak around the water hose fitting. Nothing new there. My simple project took more time than I thought. Lol. Need to do more research. Not sure how to install the shutoff switch to an existing lead either.

[@tranquilitytravels2994]

Wonderful instructions as always

[@livefreeadventurers2353]

A dude thanks for sharing this is a great idea

[@timdillen]

Thank you! Glad you found it helpful.

[@johnwagnerjr5073]

I ENJOYED IT. THANKS FOR THE INFO.

[@timdillen]

Thank you and thanks for watching!

[@kellykeith7129]

I love this Idea

[@timdillen]

It has come in very handy and is easily portable for other uses. Glad you liked it and thanks for watching!

[@theimperfectfruitarian3640]

I love your creativity! When you leave something permanently plugged in to the 12volt, it doesn't tug on your battery?

[@timdillen]

The imperfect fruitarian Thanks for your kind comment. I imagine some things could pull on the battery so I installed an energy monitor. I unplug everything else and see if there is any draw. The pump does not pull power when up to pressure but I unplug anyway if not going to use for a while just to be safe, for now. Thanks for watching!

[@markmissildine8345]

So the exact seaflo pump is unavailable...which other one will do the same? Thanks, great videos

[@Hovermaster]

Strong work

[@AndrewSkalak]

Can this pump be submersed? I saw a different project that did that. Seems like a great way to guarantee no leaking and make the whole thing more contained. I ask because I wasn’t impressed by the pressure created by the pump in that video.

[@deborahbrebner1237]

Loved this video! Was wondering what is the shower nozzle you used? Thanks.

[@yoyokum1483]

Or you can just buy a 5 gal. Solar bag ($10) with a spigot and shower on/off already attached and no leak. Sun heats up water for dishes, shower, whatever. They also come in 3 gal. bags.

[@byrona422]

A little bit of a good silicone may help also

[@timdillen]

Byron A Good idea

[@chapter4travels]

If you use silicone tubing instead of vinyl, all those connections would be easier and not leak, also it won't be all curled up all the time.

[@timdillen]

I did not know that - thank you for the tip. I will have to try that out. I hate how these curl up when you put them in a water bin.

[@chapter4travels]

Sorry, I should have started out with how well you did the video, but I was running out the door, very helpful. Thanks

[@timdillen]

hehe! no worries. Thanks!

[@Yotrek]

​@UCfQyhPHNARAqFSrjsPUOQTg I just built this system today. Thank you, this is the comment I was looking for. The curling tube is causing a problem in a 3 gallon water bottle. Wasn't sure how to fix it. Either: 1. use a stainless steel rod as a stint to keep the tube straight. 2. Insert into the water pvc and an elbow attaching it to the inlet on the water pump. 3. Will try silicone tubing first.

[@shahbazkhanjs]

Thank you for sharing.Awasome job!

[@timdillen]

Glad you are enjoying the videos. Thanks for watching!

[@shahbazkhanjs]

you very welcome

[@lestalkmorebasss]

They make a garden hose to male thread (with a ferule) adapter in one piece

[@daylight5500]

Hi, do you have an update on this concept?

[@robertbrown5167]

Lol what sort of ABSOLUTE MADMAN has a microwave in their prius? Fair play. Nice.

[@timdillen]

hehehe! I ended up taking it out as I found I like eating out better than cooking!

[@guerillarepublik1680]

love it bro! great job!!!

[@timdillen]

Glad you liked it! It's a nice small modular system that's easy to move around. Thanks for your comment and for watching!

[@LiveEasy]

This is really great!

[@timdillen]

Glad you liked the video, turned out to be a neat little modular system. Thanks for your comment and for watching!

[@stallters]

Watch sealing around your water container fitting. You have to keep it vented or it will not work. Maybe a check valve from the hardware store?

[@timdillen]

Finnigan58 Good point. I ended up putting glue around the tube but left a tiny hole. Not sure if that will be big enough for flow for a shower. Will have to test. Thanks for your input and for watching!

[@patfiore7510]

I hope you got a patent on that where can we buy these already made up

[@grvsays]

So does the pump turn on automatically as soon as the pressure is released from the other end?

[@fernboggess5]

I noticed the way you got your power from inside the center console. My consul will not open without sliding the lid backwards. I went to the Toyota dealer and they said that there was no way to overcome that problem. I am willing to bet that you can figure it out if anyone can.

[@malaekahana1]

Stay Away From Using the Clear, Soft Plastic Hose Lines... Use The Clear Braided Pressure Line Instead...

[@Yotrek]

Just built this. I left the pump on for ~15 minutes and it split the clear plastic tubing. Not sure if the braided tube will expand (with a hair dryer) to fit over the 1/2" inside diameter hose barb. The other end of the hose is smaller and fits perfectly on the water pump outlet.

[@Yotrek]

Agreed. I just built the system in the video for a prius camping trip. I left the pump on under pressure for ~15 minutes the tubing split. Just replaced it with braided tubing. Will test it in the wild this week.

[@CallMeFil]

@@Yotrek Can you give us an update

[@Yotrek]

@@CallMeFil I bought a 20' roll of braided tubing from Lowes for $20. The inside diameter of the tubing matched the I.D. of the water pump. Easy to install. much better.

[@gracecallowayable]

Wow!!! That’s awesome!!!👠👠👠

[@timdillen]

Glad you are enjoying the videos! Thanks for your great comments and for watching them!

[@KD-dr3gy]

was wondering why all the deigns used the kitchen sprayer. The shower spray is way better!

[@timdillen]

True. I liked the idea of being able to use different attachments, works well for me.

[@byrona422]

Very cool, were you able to seal up the hose that enters the water jug the round hose to the square fitting where it doesn't splash water out in your car?

[@timdillen]

Byron A Yes! Put hot glue around the tube and so far it’s good. Thanks for watching!

[@michelharris6648]

Can you share if you have to have your Engine running to work this setup? If your 12V runs while car is off how much battery does it pull? If my Jeep has to be running are their any ways to change that?

[@jasonpierce2634]

m setting up my van and bought the same pump maybe a size bigger. My application is for a mini kitchen and regular house faucet. Im hung up on the on/off switch. It doesn't appear that you have a on/off switch in this video and my question is do you need one? Does the pump regulate on automatically on the faucet is turned on? Thanks in advance for you response and time. (Equip seaflow self priming pump, 7 gallon water jug)

[@MayYouLiveLongAndProsper]

My two cents - The hose clips are too wide - Better to use narrow cable ties - even better if you warm the pipe first :)

[@tonysmith5077]

Would be much easier to use hozelock fittings

[@wanderlostrvr2582]

Is an in-line filter worth it? I bought one but will probably return it. Plus I would have to buy yet again: two more fittings. Ugh

[@timdillen]

The filter would be a good idea if you will be places you are not sure about the water quality. If you do, make sure it is easy to get to to replace. I just didn’t have the room. I don’t drink the water in the bin, I bring bottled water. I put a little bleach in each jug just to make sure nothing grows in the system. Thanks for your comments and for watching!

[@wanderlostrvr2582]

Thanks. I too do not use it as drinking water and add bleach. Now it’s a matter of getting two other fittings. Another trip to Lowe’s...?!

[@SwampNStomp]

does it maintain pressure when you raise the nozzle? I am considering this pump to make an outdoor shower on my camper, it would have about 6 feet of head though.

[@leafriver8130]

Hi Novice DIYer here and your video is giving me light. regarding the water pump, can you leave it plug for a long time as long as batttery would support it? I am wondering if there is a max time to leave the pump plugged in before it overheats. I really do not have an idea how the camper water pump works. Thanks for the help!

[@timdillen]

Glad you are finding the videos helpful! The pump can remain plugged in and won't draw down the battery. It might have an LED light on the plug but that would be very minimal and not impact power. I like to turn it off or unplug just in case it gets triggered going down the road!

[@alinegreeley1102]

Mine does not turn on🤦‍♀️ does the 12v cable have to have a switch