13" Daytons on my Cadillac Fleetwood

[@danielsmith1883]

Aye.....what up CGOD... Man this put a smile on my face!! ☺😀 I'm leaving this comment 40sec into the video & soon as I saw the Pontiac....my day was made. I had a Bonneville the same year but four door. No switches but, had some mods for the street. Even had plastic covering all the seats like folks couches were back in the day. Thanks for the content

[@CGOD]

Not a problem man, glad you enjoyed it!

[@danielsmith1883]

@CGOD them Daytons immediately changed the persona of the Lac! Its gonna hit hard out there

[@CGOD]

I’m lovin it thus far!

[@danielsmith1883]

@CGOD... That's what it's all about...glad we're able to see the journey with you. Stay up fam and blessed. I'll check for when the next one drop

[@CampfireTalesYT]

my fav video by you, i love this car

[@CGOD]

It was a great car unfortunately someone backed into it and the insurance cashed me out on it

[@CampfireTalesYT]

@@CGOD Oh, no, that's horrible.

[@CGOD]

@@CampfireTalesYT maybe one day I’ll own another but there’s a few local to me all done up already

[@CampfireTalesYT]

@CGOD For the back skirts I know you gotta grind off. The 2 plastic clips.. Does it rub anywhere else with the 13s?

[@CGOD]

@@CampfireTalesYT all I had to do to clearance it was shave the clips. Dayton wheels have a higher offset than any others though, so I had to grind the front calipers and run a small spacer. The rear will require more work to tuck with China spokes.

[@vicbergins]

Hell yeah nothing like a fleetwood i got me one a weeks ago got rid of my lowrider lincoln.

[@LamontBoucherville]

Fleetwood looks great

[@CGOD]

Thanks!

[@grantiti1545]

Much luv homie, New subscriber from New Zealand 💯

[@CGOD]

Hell yeah man! My old Lincoln that I built on the channel got sold to a m8 in New Zealand!

[@shaadfrmdoe60]

Nice looks homie. 👍🏾

[@CampfireTalesYT]

How much did you have to shave in the back? Did you shave just the inside or skirt inside edge of the backs?

[@CGOD]

I shaved as much as I could without messing up the skirt

[@CampfireTalesYT]

@@CGOD i would have loved a video on that lol

[@CGOD]

@@CampfireTalesYT basically when you put the wheels on you’ll be able to tell what needs clearanced

[@JorgeHernandez-nv1yf]

Shits bad bro..keep it up homie

[@haroldwilson1485]

Nice looking caddy I got a 96 Fleetwood brougham

[@CGOD]

Sweet! This one was a 94

[@arturoramirez7296]

WHAT'S UP BIG DOG... I DON'T KNOW IF YOU KNEW ABOUT THE S . O . S . NOT THE GANG BUT THESE ARE SOME LITTLE SPONGES THERE IN A BOX WELL ANYWAYS THOSE WILL CLEAN YOUR WHITE WALLS WHITE CLEAN HOMIE... TAKE CARE BE SAFE BIG DOG

[@All_About_the_Benjamins]

Didn’t you have 14s on your Lincoln? I agree, 13s are the way to go, but damn.

[@CGOD]

Yeah but that car was mainly driven slammed so the 14’s would tuck more than 13’s and thats the only reason I put 14’s on it.

[@All_About_the_Benjamins]

@@CGOD oh ok

[@michaelangelodiglio6678]

How is it riding on 155-80-13's? How does the car stop? any safety issues?

[@CGOD]

It runs and drives great, no issues at all really aside from speedometer being off a little from the tires being smaller

[@michaelangelodiglio6678]

@@CGOD Oh thats good. Thanks for the reply. i was just concerned about the safety...

[@MrOmerta]

Looking to get mine some spokes too.

[@mathewmaldonado3570]

Nice

[@iramcasas]

Have a 97 Deville myself, trying to put 13s on mine but after so much shaving a messed up one caliper any advice

[@CGOD]

Run a spacer to help clear

[@CampfireTalesYT]

Are spacers safe with knockoffs?

[@CGOD]

It depends which kind of spacers. Bolt on spacers are fine, if you’re using slip on spacers you have to keep atleast 1/2” of threads for the lug nuts to hold good. I’ve ran the 1/4” slip on spacers from autozone without problems but I wouldn’t go bigger than that

[@CampfireTalesYT]

@@CGOD i dont want the wheels to stick out and i know caddis are FWD so im trying to figure out what to do. Im in east Tennessee and theres no shops out here knowledgeable in this lol

[@CGOD]

@@CampfireTalesYT if yours is a FWD caddy you’ll want standard offset wheels so they don’t stick out, the 1/4” spacer wouldn’t be noticeable at all

[@CampfireTalesYT]

@@CGOD oh i thought all Caddi's were FWD lol yeah standard for sure but reverse looks so good haha

[@CampfireTalesYT]

@@CGOD im still debating on a Caddi or Buick Roadmaster which is RWD and looks similar

[@kevinpulley5989]

Hey bro nice caddy i have the same color ,were can i find the rear bumper strip.

[@CGOD]

I found it used on a Facebook group for 93-96 Fleetwoods. I don’t think they make them new anymore

[@vicbergins]

Put washer behind the spacer so you want have to grind the caliber.

[@CGOD]

That sounds ghetto though, I don’t want the wheels to stick out anymore than they already do

[@vicbergins]

This is why we have fleetwoods we have shims on the upper a arm you can put shims to bring the wheel back in there are alot of ways to do it reason why the caliber needs all that proper cast around it if you take it off your brakes will some how in the long run will just go bad .lowrides are extended by Aarms you can say thats getto too.

[@cammed6speed]

​@vicbergins I'm running into this problem on my 99 deville the rear cleared but the fronts I was thinking about grinding calipers too. Or what do u suggest. My first project

[@matthewsalas3014]

Will 13x7/14x7 china's clear the back? What would fit best with out having to shave anything or shorten the rear end

[@CGOD]

13x5.5 spokes will fit without any issues. For 13x7 chinas you’ll have to shave and possibly roll the fenders. 13x7 Daytons I was able to just shave and be good. Every Cadillac is different though, so some small changes might be needed

[@matthewsalas3014]

@CGOD they do better clearence, probably be better to just saving up for daytons. Thanks👍

[@CGOD]

@@matthewsalas3014 yeah they have a different backspacing than China wheels so they fit behind skirts easier

[@billyhernandez7540]

What size of rims does that old school car there badass

[@CGOD]

Those are 13x7 Dayton’s

[@kevinpulley5989]

Hey bro i have another question for you,i ran the amp wire bypass kit,an it was all good for a week,the my double din start saying AMP ERROR, what do you think is wrong.

[@CGOD]

Amp error? Maybe your alternator is going bad or possibly if you have an amplifier it could be going bad or a bad connection

[@kevinpulley5989]

@@CGOD I guess it's a bad Connection because it's the factory amp in the trunk.

[@CGOD]

@@kevinpulley5989 well if it’s bypassed then the amp shouldn’t be hooked up at all

[@kevinpulley5989]

@@CGOD o.k well maybe I hooked up too many wires when I put it together,I'm not good at wires only mechanical shit,do you think I hook something up wrong like the Dimmer,or illum.

[@CGOD]

@@kevinpulley5989 I don’t think so, have you tried googling the AMP ERROR? Somebody else may have the same issue as you

[@ThyBlackBambino]

The right set of 14s would probably look better tbh

[@CGOD]

I’m a fan of the smaller wheels. I did 14’s on my old bagged Lincoln. That car looks good on 14’s

[@calvinbrock7133]

What airbag kit is that

[@CGOD]

On what?

[@thecanman132]

How did you get your 13s on there?

[@CGOD]

Shaved front brake caliper and 1/8” spacer. Rear I had to shave the inner fender

[@thecanman132]

@@CGOD thanks bro 👊🏽😎

[@aidandaubert]

Did you sell the e36?

[@CGOD]

Yeah I did

[@karina1369]

Does it rub at al in the rear?

[@CGOD]

No it does not.

[@karina1369]

@@CGOD had to take mine off bc the skirt would clear on my 96 but I have no clue why mine does rub just on my back rear side

[@CGOD]

@@karina1369 sometimes the bushings on the rear differential go bad and cause some play

[@karina1369]

@@CGOD Ah ok I’ll talk to my mechanic first thing next week appreciate it

[@heribertoaguilar2078]

Yooo weren’t you running 14s on the your other ride 😂😂

[@CGOD]

Yeah but it originally had 13’s hehe 14’s was just cause it looked cooler laid out

[@djdlo]

YO do u have insta? I have question for ya