(14) Check The P-Delta effect- Tall Buildings Design - Etabs

In structural engineering, the P-Δ or P-delta effect refers to the abrupt changes in ground shear, overturning moment, and/or the axial force distribution at the base of a sufficiently tall structure or structural component when it is subject to a critical lateral displacement.
in this tutorial you will see how to check the P-Delta effect of our model.
Excell File Link: drive.google.com/file/d/1j2Zk...
All Parts: • ETABS: 20 Story Buildi...
Part 01: • (01) Designing a 20 st...
Part 02: • (02) Strat new project...
Part 03: • (03) Define Section Pr...
Part 04: • (04) prepare the DXF f...
Part 05: • (05) Import the DXF fi...
Part 06: • (06) Define the load p...
Part 07: • (07) Define The Mass ...
Part 08: • (08) Define The Load ...
Part 09: • (09) Assign Loads- Ta...
Part 10: • (10). Automatically M...
Part 11: • (11) Assign Pier Labe...
Part 12: • (12) Assign The Frame...
Part 13: • (13). Assign Diaphrag...
Part 14: • (14) Check The P-Del...
Part 15: • (15). Check The Eccen...
Part 16: • (16) Check The Soft S...
Part 17: • (17) Check The Heavy ...
Part 18: • (18) Check The Torsio...
Part 19: • (19) Check The Story ...
Part 20: • (20). Modal Analysis ...
Part 21: • (21). Response Spectr...
Part 22: • (22). Check Spectrum I...
Part 23: • (23). Design Core Wall...
Part 24: • (24). Design Shear Wa...
Part 25: • (25). Design Columns ...

[@uzmakhan4222]

thank you so much for making these videos

[@kishorpoudel6338]

how can i calculate incremental factor by rational analysis if there is p-delta effect?

[@abdulqayyum5444]

Sir provided excle sheet in the description in not correct it's showing error. please provide the Excel sheet as shown in the video

[@samnangdoeuek9705]

If P-Delta is needed in the case, what we will do next step then?

[@abyfrancis6622]

Sir .. In which situation we need to add pdelta effect?

[@ANNvlogs88]

HI ENGR. What to do after giving p delta combination.. again to check ? plz reply

[@Nikesh977]

Could you please upload ASCE-7-05 ?

[@ibrahimallawi7621]

excel sheet link is not working? could you please shear it again?

[@inno5infra]

In my case if it shows 'redesign' and i mean not showing 'no p delta' then what is the step to make it safe/no p delta.?? Please reply anybody have practiced this project.??

[@patrickj898]

Could a reupload of the excel please be done

[@rezasharifi1186]

DONT WE APPLY COEFFICIENT TO EARTHQUAKE IN P-DELTA?

[@saeednegar709]

DEAR SIR,,, I WANT TO KNOW ABOUT THE ONE THING THAT IN THE LAST VIDEO/TUTORIAL YOU RAN THE ANALYSIS, AFTER RUNNING ANALYSIS WHAT IS THE NEXT STEP IS IT CHECKING THE P-DELTA EFFECT OR CHECKING THE STRUCTURE ELEMENTS TO KNOW ABOUT ITS BEHAVIOUR WHETHER IT IS FAILED OR PASS. PLEASE EXPLAIN IT TO ME IF YOU DON'T MIND THEN

[@ehsantutorials5020]

the next step is check the p delta effect.

[@saeednegar709]

@@ehsantutorials5020 ok thanks

[@qureshisiddig9274]

@@ehsantutorials5020 How we check the p deltta affect if i assigned wind load only on my tall building

[@Yotor_Tube]

😍

[@NeerajSingh-ss1ui]

Dear sir, how to prepare excel sheet? If not a problem, Can you send this excel sheet?... please 🙏

[@ehsantutorials5020]

Hi dear The excel file link is already shared in description of this video.

[@nasimreza4040]

Sir base shear check dibo kivabe?

[@muhammadnaveedkhan9587]

Why you take P as a combination.... Please tell me what is in P combination formula

[@muhammadnaveedkhan9587]

@jever doran thanks I just simply define p delta all the time.. Hope it will not be wrong.

[@md.sayefpasha6840]

all (dead load + live load) DL+LL

[@md.sayefpasha6840]

Vertical Loads by gravity = P

[@saeednegar709]

IF THE MEMBERS ARE FALED THEN WHY YOU''RE GOING AHEAD...FIRST CHECKING OF MEMBER IS ESSENTIAL THAN GOING AHEAD

[@ehsantutorials5020]

I am going step by step . no members failed and not any mistake yet.

[@saeednegar709]

@@ehsantutorials5020 thanks for your efforts

[@rodolfoorler6495]

interesante video, bien presentado. Tema importante. Saludos, dejo enlace de un video propio que espero les guste. kzbin.info/www/bejne/gXfcmH2Yp7pnkJo

[@khuls1000]

Sir provided excle sheet in the description in not correct it's showing error. please provide the Excel sheet as shown in the video