14900K Load Line Calibration explanation. Fix any trouble.

Hi everyone, in this video I want to share some information on how to use the load line correctly and obtain significant performance without overclocking the processor. At the same time the system will be put in a position to have the right basis to perform a stable overclocking of the P-Cores and E-Cores.
With my current configuration without going outside the Intel specifications I can obtain a score in CB R23 of 41967 points and in CB 2024 of 2405 points. Good vision everyone.
Please consider subscribing and liking as this helps me create future content! : )
👇
if so click here / @expowerg3046
Thanks for watching!!
👉Asus Rog Maximus Z790 Apex Encore
rog.asus.com/it/motherboards/...
👉Intel 14900K
www.amazon.it/dp/B0CGJDKLB8?p...
👉iCUE H150i RGB Elite Liquid CPU Cooler
www.corsair.com/it/it/p/cpu-c...
👉Corsair Domiator Titanium RGB DDR5 7200 MT/s
www.amazon.it/dp/B0CHSBX471?p...
0:00 Intro
1:00 Load Line Calibration
2:17 LLC#4 = DC_LL
3:50 Benchmark
6:23 Bios settings

[@sevakbouladian1843]

So my system is staibel i put after al Dc Line on Auto like You and 35 ram settings evrething done work very well but i reach 37200 just like before do You know why ? Now im at IC AC 0.33 and i reach 38700 and is still stabel IA Dc on auto

[@expowerg3046]

A lot depends on the construction characteristics of the motherboard, PCB and VRM with its power supply phases. So it's hard to say where the problem is. However, if you copied my same settings to Thermal Velocity Boost and your temperatures are at the level of those you saw in my video, you can now try setting your two favorite P Cores to 61X. You will do the same on the Specific Performance Core tab and Thermal Velocity Boost. Obviously if it is not immediately stable increase IA_AC loadline by 0.01 mohm until stable and try the benchmarks again. I can't do more than this as I don't have the system at hand.

[@sevakbouladian1843]

@@expowerg3046 is not on Your lvl this temperature:( You reach some about 97 96 and my is on 100 101

[@sevakbouladian1843]

​@@expowerg3046i set by Core used 61x core 1 limit and core 2 limit 61x and by specify performance core 4 an 5 also 61x i understand You right ?

[@sevakbouladian1843]

ASUS ROG Hyperion GR701 is good one You think when i buy this ? For my PC

[@expowerg3046]

Hi, I think they are both a valid choice. See also Fractal or Lian li. See you😉💪

[@sevakbouladian1843]

❤

[@TrueNoobzZ]

Yo could you please remake the video in English? I'm trying to stabilize my 14900K on an msi z790 mobo.

[@expowerg3046]

Sorry i don’t speek english that good but there are subtitles. Sorry my friend

[@sevakbouladian1843]

Can be that my case is to smal becous i reach 100 C -101 enchanced my minimum is 45 C at start

[@expowerg3046]

Absolutely yes! it is a factor not to be overlooked also in relation to the fact that you have mounted a 4090 which is a monster of a card!! open everything you can open and equip yourself with a better case, a test bench would be the best. Which I'll have to do too!😅

[@sevakbouladian1843]

Hehehehehe okey i will try open everything and I buy this week new case You have any recomenedation nzxt H9 is okey ? Or samthing expensive i need

[@sevakbouladian1843]

❤❤❤❤

[@sevakbouladian1843]

You can put subtitles and u will understand:)