150 gram 4K Epic Filmmakers tool *not a mavic*

[@MrSteeleFPV]

Ahhh. I want it !! So cute !! THOMAS making it happen

[@VijitChandna]

Omg mr steele

[@georgeaura]

Ok someone needs to sell a quad with all this done to

[@Skafiskafnjak51]

I want it too !

[@KDoba]

I will buy it today

[@TeamFarins]

@@KDoba Keep an eye on us! :D News in a couple of weeks

[@alexlemmon3538]

@@KDoba bhacustoms.com/collections/bind-and-fly/products/decased-hero-6-full-kit-on-beta-85x?variant=33287847510155

[@ChillerFPV]

@@alexlemmon3538 virus detected on site and site doesn't work

[@jaro1454]

6:31 you need to properly shutdown the gopro from the app to permanently save the settings.

[@ummagawdFPV]

Good to know! Thanks!

[@Burn377]

I've seen you buzzing around the naked GoPro group, was wandering when you were going to do a video on it :p

[@JamesFPV]

I like your style of this build. You've caught my interest.

[@uscskierbro]

Did you watch the video? ummagawd.com/collections/all/products/umma85x-beta85x-naked-gopro-cinewhoop-kit

[@mathieuf.2788]

I love this content from you, to boot you’re completely excited about the build, your struggles, and the end result!

[@ryanjennings8132]

I want to buy this right now ready to fly. Please put this as a RTF drone on your shop, I bet a lot of people would be interested.

[@yvonvite]

oh yeah, I will totally buy one.

[@mrnofriski]

yeah me to

[@bradchamberlain3907]

Me 2

[@jerwallzz]

sign me up

[@flightevolution8132]

RTF for a drone like this doesn't make any sense. The kind of people who are capable of flying a quad like this don't need RTF because they already have their own radios.

[@jakobjfpv]

These shots look so unreal! I also really like the color grade you put on there. It's so cool that people like you experiment a lot with new stuff and therefore constantly push the limits of FPV drones

[@captianssundee4809]

Newton’s second law means that the motion of an object is based on the net force on the object and the weight of the object. So by using a dampener there is less force on the object which results in less acceleration (of the GoPro not the kwad)

[@baggszilla]

Haha I love the super calming music with the super steady flying footage.

[@jlarson42]

The footage that little guy is capable of is very impressive. My experience with clean and dirty setups is your awesome frame design, the original Acrobrat. I love exploring with it. Happy flying Tommy 💖🤓

[@stevenkelby2169]

Hey! He's not that little! Oh, you meant the quad! 😂

[@PaulBarger]

Audio error at 8:08! Hate it when that happens! Cool video, I want to build a cinewhoop for use on my channel so bad! I have two Hero 7s. Wonder if it can be done with the 7. I love the audio left in on the video too.

[@humbertocortes68]

Hi... Great creation... Thanks in voice from all the community... Sorry but the link of print on thingdiverse is not available... You can realease a new link for it.... Thanks in advance.

[@Jacey2001]

Ive been gone for a while, came back and am glad you're still ripping vids.

[@rototiller345]

Put the lense on a micro servo so you can adjust the sideways tilt in the wind

[@jackjohnson4524]

Duuuude I just realized that my Hero5 black is still in my graveyard... the front and back screen are smashed, but the lens and electronics are still golden. Perfect for going naked! Hanging on to broken parts can be so rewarding!

[@ummagawdFPV]

strip her!

[@peterzingler6221]

If you set your filters to match the motors you will gain alout. So something around 700 hz on the lpf.

[@michael3573]

Dig. Thanks for the links to build this. This video and the pilots' ingenuity is what got me into FPV. It was black magic voodoo to me too.

[@crazierthorn10]

Man, you're so smart, that's also some amazing drone footage...wow. Makes me want to disable obstacle avoidance on my Mavic Air 2 and get crazy.

[@bugbaaltuber]

I like the idea of inverted motors. Did you think to do a caddx vista version without gopro of course? Thanks

[@rccrazy7495]

Very cool says the drone newbie .. can you tell be what is the best transmitter for my new emax tinyhawk indoor. Taranis Qx7 class is what I'm leaning to.Thank You for your time I really appreciate it.

[@CoppertopFPV]

Tina whoop is another candidate for this. flies well and much easier to attach the hero to. Lighter also. I'm having a lot of fun with mine.

[@Infarlock]

Would love to buy something like this, even if it weights slightly more 4 mins of flight time is more than enough if you have 3-4 batteries for it

[@mr.m.4887]

Great done! Thanks for sharing, would be nice if you can share the PID settings, too :-)

[@MrBeatboxD]

best mini cinewhoop design i've seen so far, soo clean. good job

[@BOSSINDIVIDUAL1]

Best one I've seen to date. Looks amazing!!!

[@rogerfpv7408]

just WOW man!!!! Thanks, really thank you for keeping giving so much to this community!!!

[@joshuatucker7939]

Really curious what's the best pid configuration for this umma85 build with the rc in power motors you sell :) thanks for your time! You da man!!!

[@klgbca]

This thing clicks so many checkboxes, it HAS to be productized. Great presentation.

[@dividingbyzerofpv6748]

Curious what you could get out of a Lithium Ion pack. It kinda blows the sub250g option out due to a 3s 18650 is around 155g. But the possible flight time improvement is a real bonus. Also, it would give issues on clean/dirty plate and need adjustment. But... i have several 3 to 4in quads that are geting 12(flown agressively) to 20+min flights on 3s 18650 3000mah using 1404 to 1408 3600-3700kv motors. Current limitations for a VTC6 cell are around 15amp continuous and 30 amp burst.

[@jhonsonnunez9105]

hello warm regards I have a drone jjrc x11 collide with a tree and then the drone does not synchronize with the control how can I reset the control

[@iSeeFPV]

It’s pretty awesome to see micros get this kind of attention. Great video Tommy and thanks for sharing the process with us!

[@jackiemonroejemfpv4204]

I did the power and video through the charging port. It was much easier, but it was a few grams heavier. Sweet build!!

[@yngndrw.]

The GoPro Hero 6 has multiple LEDs, so I'd be tempted to mount one in view of the FPV camera so that you know the record status as you're flying. It would probably need a little printed shroud so that the light doesn't affect the recording though.

[@ummagawdFPV]

I've thought about this.... I even thought about putting a tiny mirror in the FPV view lol

[@MuscleAerialCinema]

How can reelsteady work if you detach the lens from the board? Isn’t that a pb for gyro data?

[@4CFPV]

oscarliang.com/how-to-use-reelsteady-go/ in this write up, Oscar Liang says the gyro is mounted on the same pcb as the camera sensor/lens. There is an accelerometer on the MB, but the data can be fixed.

[@CyrusHostetler]

Why the Hero 6 and not something newer? Did I miss that? Or is it just because the hero 6 is cheaper?

[@ummagawdFPV]

the hero 6 just plays the best with Reelsteady GO (and yea it's a bit cheaper than an 8.... avoid the 7 if using Reelsteady)

[@Colazsmithtv]

Bro u need to sell this...same set up...I'd buy one

[@Neilqjensen]

super cool my man! after watching this I need this lil ripper in my quad arsenal. The man!

[@kandredfpv]

I just added the 5 thousandth like for this video. I'm only now going back to watch your earlier videos on how the UMMA95 evolved. You should post more of that amazing flight footage. Awesome work Tommy, and such humility about it. 🌟

[@iDroneLab]

4:50 omg 😱!!!! that's me Thanks bro ! 😌😌😌

[@ummagawdFPV]

iDroneLab no, thank you! Your guide was muy bien!

[@iDroneLab]

ummagawd ☺️☺️☺️ thx 🙏 bro !

[@jaro1454]

@@ummagawdFPV but you didnt credit me😕😂

[@strattonford2557]

Hey buddy I see in the product listing you hard mount your fc inside the battery bay of the plastic shell? Could you give more explanation??

[@alishanmao]

I think Insta360 go just takes all this hard work away. that tiny lightweight 20g camera can stick to any whoop and records super steady videos with its flowstate stabilization. I think some people did the videos with that too. saves a gopro from stripping too :)

[@dronevan]

I have both, it is not the same. Gopro RS gives you a Hi Res SuperB Video. Insta360go is good for Insta and social apps stories. Or to be viewed on a smartphone screen :) different worlds

[@drkastenbrot]

The insta360 does not compare with a gopro 6-8. For cinematic flying the gopro is all you have.

[@renaudjacob1111]

Could you do a build tutorial on the new 95x HD version ? :)

[@Finalmile_FPV]

That’s amazing, the build, resulting footage quality. I’m blown away.

[@ummagawdFPV]

thanks man

[@smithyrtd]

Imagine DJI got to the market with a ready to fly version of this, they'd make a killing, in my opinion, it's the next big thing for filmmaking!

[@m8rx007]

Not as small, but (almost) ready to fly: www.dji.com/fpv?site=brandsite&from=homepage

[@Langor]

@@m8rx007 i think this one in the video can still use an analog set freely, which brings down the cost considerably and keeps your options open to different drones (if you have a fleet) where you can swap drones and keep the same goggles. Using the DJI system kinda constricts you a bit within the system if you want to view vtx stream from different drones (unless you get an analog mod on your DJI goggles), and the air unit is heavier than this stripped down Go Pro, and i dont think it will do 4k. even though the caddx options might be lighter... there are just different advantages to this kind of setup depending on what you want to do. it's an interesting set of options that are offered right now in the FPV world

[@lawrenceshin2150]

How do you capture sound on drone footage while minimizing the prop noise? I understand onboard footage will inevitably pickup prop noise, but can a directional mic be run simultaneously on the ground for the subject being recorded, and minimize the drone noise from the ground? Does this question make sense? hahah

[@KyberRay]

one question, the sensors in the motherboard in the gopro were calibrated to the position of the camera sensor, and use that data to stabilise the footage (in EIS), did the rearrangement of the camera sensor and the board affected the stabilisation capabilities of the gopro? if it did how did you tackle that??

[@ghostsoftherepublic]

too cool ! that footage of flying into the garage and though a little box ! shaky or not. I am Hooked !

[@gavinvales8928]

Nice work! The stripped down GoPro community has come such a long way! Is there a video out on the board to use the GoPro as your fpv cam?

[@thanhnha1408]

I'm totally down for this, love your contents as always man! Will there be a build tutorial video for the Umma85 just like the Acrobrat? That would be DOPE cuz your video production is GREAT!

[@skeyehawkproductions2383]

Tommy do you plan to do a step by step built with DJI Air unit? would be awesome!!!!! I am sure that Video will be a HIT!!!

[@kewei4767]

This is insane! Thanks for the great tutorial. I will probably build one soon and I am gonna try looking for a high capacity battery (not sure if it can be done) to increase its flight time.

[@ummagawdFPV]

Good luck!

[@GeebusFPV]

Now this looks like a little fun project. I’ve been looking for a new point of view and the Mavic Pro just isn’t cutting it anymore. This definitely fits the bill.

[@MBrulla]

Thanks for sharing the STL ..that's the thing that really sets it apart from other Naked 85mm whoops I've seen. Great build. If you want to solve the ND issue...either de-case the ND as well, or try some combinations of window tint. Stick it right to the lens.

[@ummagawdFPV]

I've actually since been using ND's for the Mavic zoom... works wayyyyy better and doesn't come off

[@MBrulla]

@@ummagawdFPV Good to know! The quality is definitely better from actual ND filters rather than tint.

[@georgewashington1621]

Did you leave the analog camera on purpose? I dont know how modern gopro's work, but when i built my first quad years ago with something like a gopro 2 or something like that, ofcourse it was a big 450 frame, i just bought a cord with a little usb connector that someone made, plugged it into gopro's USB, plugged the wires on the other end into my vTX and just flew with the video output i got out of the gopro, it could give you a video out feed on USB while recording at the same time. Dunno if modern gopros would do that, though

[@ummagawdFPV]

I'm not sure if modern go pros do that still, but the problem with that 'back then' was the latency.... it would be impossible to fly at any speed worth shooting

[@georgewashington1621]

@@ummagawdFPV I havent noticed any latency on my gopro setup, i flew my quad FPV with only a gopro on board (i think it was a "silver" or "white" version, extra light version)

[@MarkAngel86]

can you still do a horizon lock on Real Steady GO with the board mounted horizontally?

[@ummagawdFPV]

great question that I forgot to address. No, at least not straight off the card. But this now exists so you CAN use horizon lock: bit.ly/2WL4OwF

[@jmsterdam]

When you’re changing the orientation of the board wrt the camera, does it effect the smooth and hypersmooth features as it doesnt know which way is up anymore?

[@alexferrante]

Asking the real questions here!!!

[@dragonballz0]

Good question, since he doesn't exactly go into the details of whether he disassembled the GoPro "out of the box" new with default settings it comes with... or if he's used the GoPro prior to disassembly (with any settings he might have changed prior to disassembly).

[@ummagawdFPV]

that's a good question.... I only intended to use this with Reelsteady. And that requires that hyper smooth be turned off. That said, the gyro sensor is in the lens, so if hyper smooth ONLY looks at sensor data that exists there... it should be good.

[@CraftMaiker]

@@ummagawdFPV that was the answer I was looking for. Thanks Tommy! Could you maybe try that out for those of us intending to use hypersmooth? Just to confirm it

[@DamonFavor]

That thing is sweet. I haven’t felt like doing a new build in a while but now I can’t wait to make one of these. Thanks for the great content and all of the info and resources.

[@TheMadmacs]

newtons 2nd law of motion :once an object gets funky, it stays funky

[@ummagawdFPV]

😂 I like that... and mike Tyson doesn’t like funky

[@rycop]

Been lurking on the Naked GoPro group waiting for this to come out. Next up - bigger motorsss!

[@geefpv4859]

Awesome vid bud I've just made a Tina whoop with naked gopro 6. Man the soldering was small but all worked 1st time. I hadn't heard about the record on a switch which sounds good. I'm loving it in isolation n cheers for all the good work bud

[@calypsoraz4318]

This thing is so damn cool. I've been waiting for the video ever since I first saw the pics on IG

[@R21654A]

Hey bro, loved the video! I wanted to ask your opinion on the likelihood/possibility of attaching a stand alone unit of a go pro onto a mavic mini running through a seperate source of power and/or running directly off of the mavic mini’s battery! On another note, Do you think it’s possible to change the sensor of the mini to something off of a go pro or another dji drone like the new mavic air 2 or mavic pro? Love to hear your and anyone else’s thoughts on this idea! Thanks! 🙏🏼

[@SkyGizmmo]

Nice Frankenwhoop. An Amazing Cinewhoop opens up the flyable spaces without intimidating or creating liability.

[@ummagawdFPV]

Yes indeed!

[@hateeternalmaver]

I was pretty dismissive toward these "unable-to-freestyle flying GoPros" with their unnatural looking Reelsteady footage at first but I think I'm getting it now, it's like an evolution of "our thing" that's becoming a tool to a broader audience and different use cases. Bravo! 👏

[@peterzingler6221]

I still dont like real steady footage. It just looks wrong.

[@grahamjw75]

Looks awesome!!, I just need to get the courage up to take a GoPro apart but I’ve been wanting to do this for awhile now

[@jb-fpv7384]

Will Real Steady Work On a Hero 4 Black ?

[@rikkcrazycanuck]

Thanks for sharing, nice to see you've been doing something productive with your down time.

[@SoaringExperience]

Make a ready build one for sell. Like a stripped GoPro etc... People (maybe me) will buy it. I build a few quads in the past, but flown a few RTF quads from banggood and this is great as well. They fly not that bad and almost no time needed to set them up

[@fearmjpekade]

Im so curious, why not using gopro 7 for the best stabilization..??

[@ummagawdFPV]

the goal is to use Reelsteady and it plays best with the hero 6 (avoid the hero 7). If you don't plan to use Reelsteady then the 7 would be a great option

[@fearmjpekade]

@@ummagawdFPV Oh i see.., so according to you ReelSteady is better than gopro stabilization? Maybe you can patch me more information on this one?

[@thanhnha1408]

Do you need to do any gyro data convention type of thing before running the footage through Reelsteady?

[@ProjectMockingbird]

Since micros and Whoops are kinda my thing, let me know if you want some tuning advice. They are indeed a different beast when it comes to tuning.

[@ummagawdFPV]

Project Mockingbird would love some help! The FC actually had 3.5.7 out of the box. And while I actually like the way it flies more than 4.1, I did notice that prop wash isn’t great on it.

[@ProjectMockingbird]

@@ummagawdFPV For sure man...hit me up (patrick j. clarke) on Messenger and we can chat about a tune :)

[@MrTimmyGT]

Hey Tommy, what gopro settings did you settle on for a default setup. I'm about to rip apart my hero 6 and I want to make sure I have good settings before I do it!

[@elfkind5590]

Suddenly I have the urge to fly my QAV500 with the zenmuse gimbal!

[@ummagawdFPV]

lol, I had an ADS400 with a mobiles cam

[@lukasmakessomething7322]

This is pretty cool. I wonder if it would be possible to do something similar with 360 video.

[@VicknairDoesThings]

So amazing man, looks like you’ve been finding ways to stay busy and flying during this lockdown. Props dude! 👍🤘🦾

[@ummagawdFPV]

lol yessir

[@uscskierbro]

Hey Tommy, on your Umma85/95 setup page you have for step 5 "Copy these values in the PID/Filter Tab". The image is too blurry to see what your values are... Thanks in advance!

[@ummagawdFPV]

Caleb Farro I’ll fix that, thanks for the heads up

[@timebert1132]

I just bought a 85x v2 from BetaFPV, it flies ok, but I get an insane amount of PropWash when Im just slowly decending. Is there any way to make it slightly better through PID tuning?. Maybe flash JESC to the ESC´s?

[@BlackMarketFPV]

Hey man! first of all massive fan of your stuff and this video has inspired me to try this path! At the end you mention the wind playing a part and flying sideways.. have you tried the horizon lock? if so does it do any justice or just look weird?

[@ummagawdFPV]

horizon lock actually won't work straight off the card like this, but you can run it through this tool: bit.ly/2WL4OwF and then it'll work like a charm

[@AlvieeG]

Never heard of you...but now I'm glad I found this video...nice stuff...subbed!

[@Volunteeringjobsthai]

why dont u use a Gopro 8 camera with the hyperstabalisation to make it smoother without having to edit steady after?

[@ummagawdFPV]

while hyper smooth is good, it doesn't hold a candle to Reelsteady

[@kaarleenzz]

Can't you fix the angled footage (caused by angled flying because of wind) in reelsteady by stabilizing with the 'horizon lock' ?

[@ummagawdFPV]

Ah shoot, that’s what I forgot to mention. Horizon lock won’t work with this setup without running the video through a script. Jaro Meyer (from the FB group I mentioned) came up with a tool to handle that. That said, the horizon lock feature can probably fix it, however I prefer my shots to be dynamic.

[@soli3605]

HELL YEAAAHHH Was about to do 95x Pusher setup and was just about to open up fusion360 and make my own mount Awesome stuff as always, thanks!

[@dash8465]

Just put the beeper on a switch in the modes tab?

[@bytesabre]

When you fly whoops, you get propwash, just goes with the territory, and you can reduce it but not get rid of it completely. The upside of going places other drones can’t go far outweighs this. I’m probably not gonna take the naked gopro route, but I am experimenting with an insta360 go on a mobula 7 which is giving interesting results at the cost of red hot motors

[@georgewashington1621]

What batteries you use? I've got a mobula 7 too. Did you do any stripping of the 360?

[@bl4ckr4bbit]

did you correct gopro's fisheye effect thru reelsteady GO?

[@lucassheridon9809]

can you still connect to the gopro via your phone once its stripped down?

[@Dav2112]

That's awesome man, been following the little peaks you've been giving on Instagram, nice to see exactly what you've been doing.

[@pylot8187]

Aww dang... I was hoping you were going to show your DJI build up, and like how you mounted it underneath. But awesome video anyway! It’s been awesome to se you in the NakedGoPro group!

[@ProLogicEnt1]

How much to buy yours¿?

[@giancarlo6723]

I hope the Go Pro people are listening. for the amount of drone pilots that use them a lite version would be nice to see.

[@ummagawdFPV]

fingers crossed

[@biggun98056]

Do you halft to have a license for those small drones

[@Free_3.0]

I have 2 questions(If you don't mind) 1) With the radio record hack, are you still able to use the record button on the ribbon cable? 2) Did you come up with a better solution for mounting an ND filter?

[@ummagawdFPV]

Yes and yes. I now use NDs made for the mavic zoom

[@Free_3.0]

@@ummagawdFPV cool, thanks!

[@lucassheridon9809]

does that flight controller support Crossfire?

[@poastoast]

i took apart a go pro today! it’s on a roof along with my 4 day old quad :D Edit: I’ve flown for roughly 1.5 months now, and have at least 20 hours on simulators*

[@ummagawdFPV]

poastoast 😂

[@mistercohaagen]

Did you use tweezers or shear force of impact to conduct your disassembly?

[@poastoast]

mistercohaagen the good ol’ love tap on concrete ;) though I gotta say, I didn’t tap hard enough because I got the RLOD

[@bobdobbs7828]

Simulators? Where do you find a drone simulator?

[@AGILISFPV]

@@bobdobbs7828 if you have steam download Liftoff. A lot of others use Velocidrone.

[@AeroPhil]

does a naked gopro with a horizontal pcb work as well?

[@madhatterfpv80]

I’d like to see your CNC set up. I’m trying To get back into flying I haven’t flown in like 8 months it’s crazy! Build looks awesome! I 3D printed a few ducts for a “Cine whoop” never finished it!

[@Matt_Barnes]

Really digging these deep dive videos. Great content man thanks!

[@ummagawdFPV]

Cool... because it’s probably going to be the type of content I make for a while lol

[@nikfpv3456]

That's fresh. What sort of cruising flight times are you getting?

[@ummagawdFPV]

about 4min with a 4s 450mah

[@PATELPARTH3344]

@ummagawd can I buy it from you? What would be the price for assembled drone?