3 years later and this is still helping immensely. THANK YOU!
@msyahrulm274 жыл бұрын
thank you very much for helping me in completing my college assignments
@TechAcad4 жыл бұрын
Happy to help! And thanks for your great support my dear Friend...
@eggxecution3 жыл бұрын
@@TechAcad thank you so much good sir I'm really bad at this to be honest
@b2b313 жыл бұрын
This is high school for me
@bomberhood72342 жыл бұрын
I really wish they were more specific with directions. Thank you for helping me understand this. You’ve been a real life saver.
@MadisonLincks Жыл бұрын
You're the only reason i have a 94% in this 8-week class before taking the final exams, THANK YOU!!!!!!
@TechAcad Жыл бұрын
Glad it helped!
@blueman16772 жыл бұрын
I just want to thank you for the wonderful videos you have produced regarding packet tracer. Your videos got me through this last semester.
@TechAcad2 жыл бұрын
Great to hear!
@richardkelly75553 жыл бұрын
'thank you so much for making these videos!!! I know I wouldn't make it thru this semester without your help
@TechAcad3 жыл бұрын
You are so welcome!
@ethix17943 жыл бұрын
Literally the goat of virtual learning
@TechAcad3 жыл бұрын
Glad it helped!
@VoqCithri2 жыл бұрын
For those who have a problem with "Console into SW1 from the Terminal on PCA" - CLI should be locked. You should use Terminal on PCA to configure router first, and then switch your cable from Router to Switch, and then open again Terminal on PCA, here you go, configure Switch.
@frankwu46579 ай бұрын
You ARE A LEGEND! This is THE answer I've been looking for! ALL videos showing "click to switch", but YOU, and only YOU, point it out the "Console into switch". BIG THANKS!
@ashtenlastname40452 жыл бұрын
i woulda died without your videos man thank you so much.
@matthewrodgers71902 жыл бұрын
Thank you thank you thank you ive been struggling through the class and cannot find anyone who speaks english (im american and only speak english) all of the other ones are in spanish or a different language so there not any help to me ill b sticking to your channel from now on when i need help keep up the amazing work
@michaelm46543 жыл бұрын
Thanks so much for these videos. It really helps going through these step by step.
@TechAcad3 жыл бұрын
Great to hear!
@jamieplaysyt7965 Жыл бұрын
Thank u for helping me out with my college work assignment
@johnaagrinsoni87292 күн бұрын
you are the best explaining thank you
@invader444443 жыл бұрын
Amazing. So helpful for when I get stuck. Thank you.
@TechAcad3 жыл бұрын
Glad it helped!
@linawnielsen122 жыл бұрын
Thank you very much for the great video, very clear with each steps, and good in explaining too.
@TechAcad2 жыл бұрын
Glad it was helpful!
@iamghost_4043 жыл бұрын
this is so helpful man you awesome
@TechAcad3 жыл бұрын
Glad it helped!
@danflock11612 жыл бұрын
Your videos are excellent!
@TechAcad2 жыл бұрын
Thank you very much!
@romeocfc385710 ай бұрын
Top video, you guys don't miss!!!!!!
@TechAcad10 ай бұрын
You're the best!
@annaesalhi52103 жыл бұрын
thank you so much for wonderful explanations
@TechAcad3 жыл бұрын
So nice of you
@tg94604 жыл бұрын
Thanks for the great work you are doing. Is it possible to download this for step by step practice? Thanks again.
@TechAcad4 жыл бұрын
Thank you so much for your great support... And you can contact us using our website. Link you will get from our Facebook Page.
@KeeK78912 жыл бұрын
hello tech Acad! I have a question. when I go to open the CLI tab for SW!, it says the CLI tab is locked. Do you know why this is and how I can access it? Your videos are amazing and help me so much. Thank you!
@VoqCithri2 жыл бұрын
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
@CcCc-jv8tz3 жыл бұрын
Ty! You are a life saver! ♥️
@TechAcad3 жыл бұрын
Glad it helped!
@TheNamloc1003 жыл бұрын
15:55 The command you typed in for Disabling all unused switch ports didn't work for me so I typed in the exact command on the instructions "interface range F0/2-24, G0/2" and it worked.
@TechAcad3 жыл бұрын
Glad it helped!
@serenade7133 жыл бұрын
You're awesome! Super helpful!!!
@TechAcad3 жыл бұрын
Glad it was helpful!
@elshaddaikalimpong20854 жыл бұрын
Could you please do the Thank you? 10.4.4 Lab - Build a Switch and Router Network I search but not find it
@renan61094 жыл бұрын
You are the Best. Thanks
@TechAcad4 жыл бұрын
You're welcome!
@Unauc62 жыл бұрын
Thank you for your help.
@TechAcad2 жыл бұрын
Glad it helped
@somagarcha5985 Жыл бұрын
I complete my assignment by following your steps it shows 95% but should i do?
@zelrius8714 Жыл бұрын
Same here, I checked results and I get 97% because my startup config for switch 1 is wrong but I don’t know where I’m messing up. I even redid everything
@mohamedbayo30853 жыл бұрын
Thank you professor
@TechAcad3 жыл бұрын
You are very welcome
@kashifmunir41564 жыл бұрын
Hi Tech Acad, you are doing wonderful job. Can i request you please provide us all the Packet tracer files and Documents for CCNAv7 . Thanks
@TechAcad4 жыл бұрын
Hi please contact us using our website. Link you will get from our Facebook Page...
@BillySwift. Жыл бұрын
I can’t thank you enough 👍
@TechAcad Жыл бұрын
Any time!
@CliffBotaoАй бұрын
thank you 😇
@TechAcadАй бұрын
You're welcome 😊
@rtpeterson033 жыл бұрын
Thank you, friend
@TechAcad3 жыл бұрын
Thank you too
@mckeinryaurin95982 жыл бұрын
Why i couldn't enter the RTA password? the password was 123 but it kept saying it was invalid
@MultiAltron2 жыл бұрын
Thank you soo much!!!
@lilkibby31113 ай бұрын
I did everything correctly, but Vlan1 has an issue with port status, I dont really want to restart this entire thing again (my 4th time)
@PrasantaSahoo-f7b4 ай бұрын
RTA and SW1 are both locked, so cannot console to RTA from PCA, kindly suggest a solution. Thanks
@abhishekraj4775 Жыл бұрын
thank you
@TechAcad Жыл бұрын
You're welcome
@riwantositinjak3372 жыл бұрын
thank you so much broo
@TechAcad2 жыл бұрын
You're welcome!
@eggxecution3 жыл бұрын
why is it line vty 0 15 ? can I set it up from 1 15 or 1 99 something like that or digits beyond?
@TechAcad3 жыл бұрын
No! We can create 16 maximum session to connect the device remotely using Telnet or SSH!
@fimla3 жыл бұрын
Thank you again!
@TechAcad3 жыл бұрын
You are welcome!
@alpeiros2 жыл бұрын
Thank you!
@TechAcad2 жыл бұрын
You bet!
@Leo19913 жыл бұрын
i am getting an invalid command in the PCA cmd when i type in the information according to ssh -1username target :S and i have followed the steps correctly
@TechAcad3 жыл бұрын
Hi it is not ssh dash one. It is ssh -l (Small letter L) Thank you
@Leo19913 жыл бұрын
@@TechAcad oh lord xD well that explains it, thanks alot my dude!
@retagen2 жыл бұрын
I had the same problem, feel kinda silly for typing "1" over and over lol
@chirstallimxiaowei16282 жыл бұрын
my exam is something like this there is lots for me to remember and idk that question configer ssh and yea I stuck there no matter how much tries I got and then have to retest again
@wrlccywrlfh4 жыл бұрын
what application do you use for recording?
@mitramolavi85892 жыл бұрын
thanks
@TechAcad2 жыл бұрын
You're welcome!
@ruyerttt Жыл бұрын
hello! thanks for uploading this video, but i have a problem considering the "interface gigabitEthernet 0/0". after typing that command terminal keep saying: "%Invalid interface type and number". what should i do to solve this issue?
@TechAcad Жыл бұрын
Please verify the correct interface name and type it!
@rishabhujjainwal21643 жыл бұрын
sir i wrote wrong password on 12:01, now it states connection refused by host..which is uncurable What i can do to resolve it?
@TechAcad3 жыл бұрын
You can try with the correct password!
@StretchReality2 жыл бұрын
for some reason keep getting an invalid command whenever I get to the ssh step in the command prompt from PCA. I've followed every instruction you said to the letter and Im ready to punch a hole in my monitor
@TechAcad2 жыл бұрын
Make sure that you give the correct command ssh -l username target where -l is (dash L in Lower case).
@derekbleboo5508 Жыл бұрын
please post the pdf or give a link to it
@luismurillojacome7223 жыл бұрын
at the moment of wanting to configure SW1 it tells me that CLI tab is locked. How or what can I do?
@TechAcad3 жыл бұрын
You can connect the device using a console cable, and configure it!
@VoqCithri2 жыл бұрын
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
@hollandtobias47562 жыл бұрын
thanks man!!
@TechAcad2 жыл бұрын
Happy to help!
@pompisfaceАй бұрын
what is the password on the command prompt your not showing me what is the rest password im having a very hard time doing this and its letting me because you not showing how to type that stuff on the command prompt im very stuck on it and I dont wanna give up...
@polonium9921Ай бұрын
password@123
@violadens3 жыл бұрын
i dont know why but my SW1 CLI is locked and I don't know how to unlock.. TT
@TechAcad3 жыл бұрын
You can access that using the Console cable! Thanks for your great support and sharing my dear friend!
@VoqCithri2 жыл бұрын
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
@jaysonsworld7154 Жыл бұрын
12:20
@laohu55112 жыл бұрын
another 100% completion rate .
@dimori_yt4 жыл бұрын
Hello brother, could you please help me solve a packet tracer problem?May i have your email?I want to send the packet tracer file..Pls im begging😢😩
@TechAcad4 жыл бұрын
Hi You can contact our team using our website. Link you will get from our Facebook Page.