Thanks to QDude72 for video suggestion Detail strip reassembly without any tools other than a spent casing.
Пікірлер: 336
@silvermediastudio7 жыл бұрын
Impressive, with no tools. The best assembly demo I've seen.
@blueskys88146 жыл бұрын
I just got done disassembling and reassembling my Springfield Armory A1 , with this video for help, and it was painless without much need for patience. I really, really like the 1911 series 70. The romance began 34 years ago on the range at Yorktown Naval weapons station. I can not figure out why I would need any other hand gun.....EVER! Thanks For The Video!
@MlLKMAN8 жыл бұрын
Thank you for posting this video. I am new to the world of 1911s and used this video to completely strip and reassemble mine for the first time.
@oldmike72392 жыл бұрын
Amazing! Glad he did this on a GI Mil Spec 1911. No way would I ever try this. It’s enough to field strip my 1911 to clean. Even then I still get a little nervous when trying to set the slide stop lever back in place when I’m finished. Well done.
@jamesfreud18 жыл бұрын
After about 3 or 4 yrs this is still one of my favorite channels.
@MrColt45acp8 жыл бұрын
+jamesfreud1 Thank you. I hope to have the time to make videos again.
@jamesfreud18 жыл бұрын
+MrColt45acp Your welcome, and that would be great! I look forward to seeing them. You definitely have the coolest job ever! John Moses Browning is my hero!
@MukeshyadavYadav-gt5nu3 жыл бұрын
@@jamesfreud1 ji
@zocave3 жыл бұрын
I really enjoyed this sir, planning to buy from a gunsmith here who sells 1911 for 120 bucks 😂
@SzymonNatanRajca Жыл бұрын
All these years, and this is first time when I see someone disassemble and assemble 1911 without use of any tools.
@loganpollock16896 жыл бұрын
Back in '92, I bought a bag of parts at a gun show. I didn't have any videos like this but I managed to get it together in about an hour. It has an Auto Ordnance frame and the older colt slide with the patent dates on the left side. It always worked well and my brother shoots it now.
@AlessioQ3 жыл бұрын
I really like the tip for reassembly the main spring housing with the trigger and its pin!!!! thumbs up!!!!!
@karguy9110 жыл бұрын
Well done sir. I love the 1911 and that right there is one more reason why JMB is a god in the gun world. Thank you!
@chazzott13 жыл бұрын
I really look foward to each new video,I'm new to 1911's you have really helped me understand the history of this grand weapon, Thanks a million!
@wigger88 Жыл бұрын
He did a fantastic job. Most people don't realize how simple the 1911 really is
@wizardking85283 жыл бұрын
Excellent Video! Well done and very educational. Now I can finally put my 1911 back together again. Thanks.
@lolley11009 жыл бұрын
Last time I stripped mine down just to replace a trigger that wasn't catching the grip safety, I wanted to bash my face in when it was time to put it all together. This guy is a pro!
@jtankersley78 жыл бұрын
I'm convinced you've done this at least once before. Maybe more. Great video. I just used it to reassemble my series 80. Some slight difference thanks to the extra block but I figured it out. Made me want a 70 though.
@inigoechevestemaza32772 жыл бұрын
This is the most american comment I've ever seen.
@voogun13 жыл бұрын
You Sir are the Jedi of 1911`s ...Thank You for the Class....I`ll save this video for sure ..
@bernardcasinto72823 жыл бұрын
YOU MAKE IT LOOK SO EASY! THANKS FOR THE VIDEO
@richardwhite43006 жыл бұрын
I have discovered that the hammer and mainspring go back into the receiver really easily if you wait on inserting the grip and thumb safeties. Here's how I do it: 1) Insert the hammer. 2) Holding the receiver with my left hand palm down, over the top, with my thumb holding the hammer forward (and covering the hammer pin, which is prone to falling out), I make sure the hammer strut is swung up out of the grip. 3) Insert the sear spring. 4) Insert the mainspring assembly far enough to cover the bottom of the sear spring and hold it in. 5) Swing the hammer strut down. 6) The tricky part is using gravity to align the hammer strut so that it seats itself in the recess on the top of the plunger as I slide the mainspring assembly up. It's not really too hard. 7) Now insert the retaining pin. 8) Now proceed with the safeties.
@mazenreslan18547 жыл бұрын
Extremely well explained and great shot video. Very helpful
@Mcmhffin9 жыл бұрын
I love the way that 1911 looks
@gaganbehera7187 жыл бұрын
mcmhffin new weapons sow
@ashifahmed40617 жыл бұрын
xreh
@user-zf1vb3yo5u7 жыл бұрын
منور شيخ السعودية
@mehranqadar55857 жыл бұрын
hi
@imtiyazahmad22067 жыл бұрын
FARDIN 💎
@Blue7913 жыл бұрын
This is great and I'm putting this in my favourites. Thanks for sharing!
@wisdomseeker489812 жыл бұрын
Thanx very much! You saved me from the shame of bagging my Trophy Match to the gunsmith. Got a EGW mnsprng hsing/mag well from Dillion & figured it would be simple install. Woulda been if I hadn't let the trigger spring get away from me. Your vid gave me what I needed to detail it down (& give it the cleaning that was LONG overdue) & get it back together. I've been able to field strip & reassemble the Garand (in 18 secs at my best) since I was 8, but was remiss in getting equal skill w/the 45.
@Smashine Жыл бұрын
Got any you could send me that I could build I’ll buy whatever price all my gustore shut down I just turned 19 it was the only one and it’s hard to find them I’ve been looking ever
@reddevilparatrooper9 жыл бұрын
OUTSTANDING!!!Love my 1911!!!
@mjloosh10 жыл бұрын
Excellent demo. Looking forward to attempting this. Thank you.
@Chrisra-bw1kj6 жыл бұрын
Wow, that was an awesome and amazing work you did
@Thatlittleyob7 жыл бұрын
much love for this guy right now, after hours of trying.
@tonysmith5465 Жыл бұрын
Very very outstanding video. Great job. Keep up the good work. Thanks a lot friend. SC Navy vet.
@MrColt45acp12 жыл бұрын
@DRazloga Every magazine lip I've seen is too thick to fit in the screw slot. The slot on the screw varies considerably from pistol to pistol. Some screw slots are too narrow even for the cartridge rim. Thanks for watching.
@mdcebu13 жыл бұрын
BRAVO truly an artist at work
@neomabitsela7064 Жыл бұрын
What a beauty! I'm just a 20 y.o who taught me about this
@richardwhite43006 жыл бұрын
Also, the trick to getting the barrel link pin to line up with the holes in the receiver is to hold the slide upside down and insert the barrel. Then insert the recoil spring and plug, but push them all the way forward. Now tilt the slide slightly forward and make sure the barrel link is laying down on the barrel. Still holding it upside down and tipped slightly muzzle-down, slide the receiver onto the slide until it stops. Now just turn the gun right-side-up and the barrel link will be lined up perfectly for you to insert the slide stop.
@GunWebsites13 жыл бұрын
Very cool
@MrColt45acp12 жыл бұрын
I'm glad the video helped you out. Detail stripping the Model 1911 is not that difficult once you do it a few times. It's good to clean and lubricate the inside of the pistol frame and parts occasionally. Thanks for the comment and thanks for watching!
@bharatzarekar48437 жыл бұрын
MrColt45acp h HD video games
@rishiawasthi46956 жыл бұрын
MrColt45acp
@santosh.thakurthakur85116 жыл бұрын
Sahras
@vijayrajlovesongvijayrajlo97936 жыл бұрын
Kay Good 👍
@federicogarguir84699 жыл бұрын
Very good video, EXCELLENT Pistol made in Argentina when the things was well done, regards from Argentina!
@drifterbbb36499 жыл бұрын
That is an Argentine contract pistol, before the "Sistema Colt". It was made in Hartford, Connecticut, USA.. it is even roll marked on the slide. It is a real Colt. The Argentine made "colts" have different roll marks. Ones marked "DGFM FMAP" are the only OFFICIALLY licensed Colt copies produced in Argentina. (Many of the other copies were poorly done, and are not anywhere near as collectable.. yet). The real Colt manufactured ones are getting fairly valuable here in the US.
@federicogarguir84699 жыл бұрын
Much appreciated your comment, I have a DGFM FMAP pistol, is godd know that its fairly valuable for there.
@lfranciscotejeda12 жыл бұрын
Great job sir, you were my instructor today. I really appreciate it!!!
@justinsomerset55878 жыл бұрын
Just like the disassembly video, totally awesome! Thanks.
@kyledailey179 жыл бұрын
Thanks for an awesome video with out over explanation and personal opion like most videos.
@logonq13 жыл бұрын
Looks like you have done this before, jaw dropping, Great video !
@ldgrey196312 жыл бұрын
this is a great series on the 1911, thanks.
@scooter1756813 жыл бұрын
Very nice. Thanks for posting.
@stevencarter79999 жыл бұрын
Love these videos. You make it look so easy.
@HopliteWarlord4 жыл бұрын
You nailed those grip panels! 😄.......nice job!!
@TheDishD13 жыл бұрын
Jaw dropping vid once again sire, thank you for showing and sharing your knowledge, truely mind blowing, best wishes and be safe my freind
@lulsalbengetnmoney24322 жыл бұрын
I love the 1911 it’s perfect
@Matt363613 жыл бұрын
This was really good! Do more like this.
@Sven-Olof13 жыл бұрын
this is so cool but u make it sound so easy thanks
@MrColt45acp13 жыл бұрын
@QDude72 Thanks for suggesting this video.
@dudespin13 жыл бұрын
Great Stuff! If I ever get my hands on a 1911 I will be referencing your pages.
@stevehoffman97352 жыл бұрын
Expert at work.
@kanishkgautam98915 жыл бұрын
Hey! Im here to prepare for my area 51 raid, Wish you luck as well
@nomore80422 жыл бұрын
That's funny. Although I didn't read every comment I am shocked that there were no 1911 purist yelling at you because the sidearm that you just demonstrated is a 1911A1.
@MrColt45acp13 жыл бұрын
@totenkopf999 Not very many using the "no tools" method. Thanks for watching.
@kopcicle Жыл бұрын
Thank You. It had been too long.
@monzon5293 жыл бұрын
Thats pretty bad ass. Thanks for the video.
@user-cg9nr5rq9u4 жыл бұрын
Полезный навык ёптыц, особенно закручивание винтов ногтями. Со школы следует начать преподавать на уроках ОБЖ.
@DILLIGAF883 жыл бұрын
That was truly amazing 😲
@rojocorsa12 жыл бұрын
Great job on both videos!
@tahitibobrcs83419 жыл бұрын
you are incredible , best verbal and visual ever reminds me of being at the armory
@bfgivmfith3 жыл бұрын
Well Done. Thank you!
@sonnyvillaver98263 жыл бұрын
So easy to watch
@PeeNidsCold2 жыл бұрын
Me at the back row of class, dissassembling and assembling my ballpoint pen
@itsdarkhere81184 жыл бұрын
thanks I learned something today. You got new subscriber.
@MrColt45acp13 жыл бұрын
@chazzott Thanks for watching the videos.
@Dagger19558 жыл бұрын
Nicely done, thanks.
@kwakade035 жыл бұрын
Your voice is same as tony stark
@edjones87064 жыл бұрын
Look ma no ha#! ER. Tools!!! Nice job
@zerardiego7 жыл бұрын
Best of the pistol video ..That was former Argentine Army pistol. Probably i did my duty with that one..
@ashifahmed40617 жыл бұрын
a
@Tarsarian13 жыл бұрын
Love this Channel.
@TheEltopian13 жыл бұрын
That was fun to watch!
@tumedisomofokeng24586 жыл бұрын
that was a great education vid to see thank you
@trailguard. Жыл бұрын
911 what's your emergency There is a man making guns from lego
@Smashine Жыл бұрын
Bro said Lego
@jilsoncabondocan34299 жыл бұрын
I love colt llama cal.45..thats my gun b4...1978.
@MrJacksaces11 жыл бұрын
Excellent, informative video's ! Much obliged.
@MdSalim-fm5cp7 жыл бұрын
Jeff Cook x3
@grsymes7 жыл бұрын
I have no interest in owning guns but I fascinated by the design. I'm always amazed at how few screws, nuts and bolt go into firearms usually seems to be a simple or complex series of interlocking pins and latches.
@douglasbrinkman59375 жыл бұрын
And in a pinch, an empty case can substitute for a missing recoil spring cap.
@kalliste2313 жыл бұрын
Another great vid
@whataname018 жыл бұрын
The gun seems pretty worn as the parts slips in pretty easy but on a newer gun might have some problems. Nice video to simplify the process.
@madkouraliali25416 жыл бұрын
whataname01 cv
@RakishTilt13 жыл бұрын
Very cool! Thanks for this video
5 жыл бұрын
Very informative Great !, could you do that with a Luger Parrabellum 9mm ? they are VERY tricky .
@ronvanfossen69797 жыл бұрын
dude you do that so well..lol...so easy to follow thanks. I am a little slow lol
@SalmanAli-ln7ml7 жыл бұрын
Ron Van fossen .
@seandimatulac45693 жыл бұрын
how i feel when im bored in class stripping my pen and putting it back together
@audreyogorman29233 жыл бұрын
Truss feel like you’ve mastered engineering
@tonyarbs12 жыл бұрын
That was impressive.
@heathshuford84365 жыл бұрын
I’m 11 and I love shorting the gun
@babuxavier83186 жыл бұрын
I love the 9mm pistol
@andresrodriguez942810 жыл бұрын
Very Good....
@Kalanioccc2 ай бұрын
very cool
@Donnybrook1013 жыл бұрын
nicely done...thanks
@georgevidalis42607 жыл бұрын
very impressive!
@galaxym20294 жыл бұрын
Bravo!
@seulottu13 жыл бұрын
grate vid
@Hindurashtra3366 жыл бұрын
Nice video Thnx for information
@ansarhalabjay79546 жыл бұрын
Love that way
@ghostzombie63977 жыл бұрын
might save this for later
@SamirHuseyn_AZE Жыл бұрын
Best of Best
@dwayneguydammit12 жыл бұрын
thank you for sharing this fantastic video! and yes i will do this with my ultra shinny 1911A1 stainless! its a gun and im gona enjoy using it as such! again thanks for the time and effort you put in here. very impressive. keep up the good work. i think the dislike came from a guy who couldint fugure out why it wouldint work on his airsoft gun?
@wiamrostom2029 Жыл бұрын
Amazing
@mirasoljudkins3176 Жыл бұрын
⭐️⭐️⭐️⭐️⭐️ Ten out of ten Was doing No cat maid mission to sluaghter furries worked very well