#1917

[@dazzlingdiamondpainting7735]

I would love to see you make a silicone mold of the top piece. That would be much better than plastic. So I vote for a two piece mold too 😊

[@sowhat7472]

Love this but I would prefer a resin lid ❤❤ I would love a set of four

[@NadineFoster]

i vote for a 2 piece mold. This is so much fun. I love it.

[@EleniSkarlatos]

4 piece set would be amazing

[@cindyorgill6619]

I vote for a two-piece set. This turned out beautifully. Well done. 🎉🎉

[@kathyater9635]

I think these coasters are beautiful and I love the fact that the beads can move around inside the coaster. I’m going to have to try this myself!! Great job!!!

[@Ca_Guar]

It looks like an antique piece for me, which is gorgeous! ❤❤❤

[@kellyjean4981]

I love shakers . You are a creative machine! You deserve all the success in the world, with your talent, tenacity, drive, and passion

[@PouringYourHeartOut]

thankyou so much 🥰

[@marymclaughlin5034]

Agreed!!

[@dorianesalem8076]

Me too! ❤

[@marymclaughlin5034]

❤@@dorianesalem8076

[@lisaniesen1397]

I think you should make one look like a beachy island, that would be so cool!

[@lalendiproductions]

❤love the new mold, I think - as you asked specifically - that it might be better with the plastic sheet…perhaps you can offer, next to the mold, a set of 10 plastic sheets, already cut (Cricut) out in the right measurements? That would be my idea… it looks gorgeous, groet Ingrid

[@MrFairymoon]

This is brilliant, wonderful just the way it is. Best idea I've seen in a while. 😊❤

[@MCher2]

I love your molds, especially the crystal ones. I’m wondering if you changed your shaker mold a little to where you add your crystals and such to the underside, so any imperfections are not easily visible. Thank you for sharing your craft!

[@janicepage2257]

I really love it. Something different and unique.

[@traceywhite2480]

Black looks better but it's beautiful. Love this idea fantastic mould 🎉🎉

[@KaydeeResin]

I would definitely want the top mold! Beautiful coaster!

[@louisewest5431]

Love this, so pretty and the possibilities are endless. I like the way you've used the plastic then resined over it. x

[@elaineprovan4500]

Wow! Love the coaster shaker and the new mold! 😍

[@bethboyer5368]

I love that, Maybe cuz for the valentines day you can make a red And pink one.❤

[@masterrichie9831]

You’re an expert to me Muriel!❤

[@CeliaDamiano]

Brilliant. I love seeing everything you do.

[@katrinthorsdottir7514]

I think this is totally nifty! Such a cool technique. 😊❤

[@anarangel5627]

GORGEOUS! Love those!!!!!❤❤❤

[@nancylagana6435]

Thank you, Julie! I love learning new techniques and you teach so well! ❤

[@kimclayton5814]

Black backing for just the center circle would be beautiful. Leaving the outer crystals clear. A hard resin top might give you the ability to push down with even contact and pressure when glueing/UV resining it down. So it would adhere more evenly. I would try a 9.5 resin top instead of plastic.

[@LauraMay-vk5yk]

❤❤❤ your shaker is great 👏 😄

[@jacquelinebraithwaite6956]

Absolutely love your new mold. I hope you will also put it into your Amazon store as I cannot purchase it from eBay in my country. I think a two part mold with a lid would be great

[@mandyminshull2351]

Maybe a beach theme set, with an aqua blue surround and then sand and shells inside

[@tommie5967]

These are so cool and different .you are so creative and have such an imagination. I think that ireadesant film with clear baubles would be amazing

[@michellegarza9541]

Those are so cool! I love how many possibilities there are! You said dried flowers and I would love to see that!!!

[@OG_Beckie_Leigh]

This is too cool! I think making an additional mold for the topper would be perfect. I have several money bank molds, and they have a flat disc mold that makes a disc that’s maybe 1.5-2 mm thick and fits snugly into the side of the money bank. The groove in the money bank mold is similar to what you have built into your coaster mold.

[@riabrown2379]

How soon will you be able to make these molds. I hope with a set of 4 coasters

[@leonettekoen3265]

O they are beautiful. Like your way.❤❤❤

[@patriciagregorowicz8141]

Very unique Julie. I vote for a 2 piece mold. Maybe you can make it where it would snap on top not a flat piece but one with a side that would fit over the top.

[@suewarnes9469]

This looks exciting! 🤗 Love the mould! Although the way you have made it is genius, Putting a hot cuppa on ( even heat resistant resin) might penetrate and warp or discolour the plastic underneath. I think a top mould sounds more permanent. Either way I want one! ❤

[@WendyBurtenshaw-yl2hs]

Very pretty Julie. I love aqua's & green teal colours, that would look nice too.

[@kathyrogers5395]

Fantastic pour, Julie!👏 I have a 14KG Ring with 24KG Flakes between 2 layers of clear acrylic pieces so the Gold flakes move around inside. I could never figure out until I watched your video! Thx for solving this mystery for me! ☺️

[@angeladennis4351]

This idea could make a cool trinket bowl too. I actually thought it was a bowl at first. Either way, it's beautiful:)

[@cherylburkitt9722]

Adorable and very clever 🥰❤😊

[@kimjefferson3425]

Those are gorgeous, the first tough seen of them. But definitely above my skill level. LOL

[@sherryj2561]

I love this so much. Endless possibilities. I would also try the resin top instead of the plastic piece.

[@carolynfrancis-mclucas6185]

Julie, I love Victorian things and wondered if the top row of your mold could be a row of 🌹 🌹 🌹 🌹? I love that this mold is shakeable.❤ I love your channel. 💕

[@beverlytinsley-minniefield2434]

So awesome Julie, I love these! Definitely would like to see with an opaque back!! I do think a resin lid would encase the inner portion and seal everything tight.

[@MaureenAstrid]

No worries, like the longer videos ❤ they are super fun and gorgeous ❤ I would love a sea theme

[@karliechardi2229]

Love these! I think it would be really neat next time doing either the same or with flowers... But..... Have the final seal (after the cut out laminate) in black.

[@vezhopkins714]

cool would love one in pink/red/white for valentines day :D

[@marybeth17]

Congrats Julie!🎉It’s a very cool mold. I love the way it came out.💗have a lovely day,💐

[@sarahduckett3307]

U should make a puffy heart shaker. It would be awesome

[@smittyskitty]

That mold, and the other crystal molds are STUNNING!! They are definitely my favorite, along with the puffy hearts! I love using nail art charms in my art. They're tiny, and come in everything you can think of! Definitely small enough for shakers. Love, love, love your work ❤

[@jackiepena1541]

Absolutely Gorgeous 💎💎💎

[@tammytoth5874]

Love it!! The mold could be used as a nice trinket tray too ❤❤❤❤

[@PouringYourHeartOut]

Great idea!!

[@mywifetheartist]

That coaster mold is gorgeous. Your creativity is amazing and glad you share this with all of us. ❤❤❤. I think no black background because it is so elegant. The copper pen looks so pretty.

[@PouringYourHeartOut]

thankyou so much 🥰

[@lindahamm193]

Your creativity is amazing 👏. You can make me dream of only being able to make my own projects as beautiful as possible. Thank you so very much for sharing your talents. Have a Blessed day.

[@siobhankirk9320]

Beautiful Julie, I love it ❤

[@gigigirl6898]

Absolutely gorgeous

[@Aangel452]

Great idea July, I agree this is probably a less messy and stable way of making a lid😀 Love the old fashion other one with the pinks and light plumy violet with faded silver outer rim, just lovely, its a shame the glue ran on that one🙃

[@CynthiaHill-pg7jm]

Love them, I would keep doing it with the plastic top.

[@deverylewis225]

I have a few of your molds already I would sure love this one ,I think a two part is the way to go am sure you will come up with the right answer.

[@lisaburnham7151]

I absolutely love this! The mold is amazing! Maybe you could make yourself a top mold and try it out. It might be easier than the plastic. I want to make some in blues and silvers. 😍

[@monicas310]

Love it!!! Incredible as always! 🤩 a resin top with sides that could loosely fit into the existing grooves might be good? Then you could just add some small beads of whatever adhesive you wanted. But truly incredible like always!!! ❤❤❤ Also, I think you CAN consider yourself a professional mold maker since, from what I’ve seen (and I’ve been shopping around for YEARS) your molds are the BEST on the market!!!

[@melissaphillis7247]

❤ 🎉 absolutely amazing new mold!! You're so clever! 🎉 ❤

[@SherryHernandez-lh6bj]

Love, love this technique!

[@dawnpearson4907]

❤❤ so pretty!

[@mamacat1956]

I adore this piece! I am not sure how to do it, but I do think that a separate mold for the "lid" would likely leave this with a cleaner finished look. I have never done any resin before. But for this I might start. So my vote would be for a 2 mold set.

[@BoredWifesProductions]

Very pretty❤❤❤

[@mattersofthehartbynat8815]

Absolutely genius Julie!! You are amazingly talented and so generous is sharing your talent with us! Couple of comments… I have some UV resin in a needle tip bottle, and I think this would work well for ‘gluing’ the acetate down precisely. And, as for the resin disc, I think it’s a great idea but, I think you should offer it as an additional extra… that way your customers can choose to have the shaker mould with or without the disc? By the way… I am enjoying all my new coasters moulds that I got from you last week… so exciting!! Much love from the ‘other’ beautiful coast (Gold) in QLD! ♥️♥️🇦🇺

[@Mel1Ski]

I love these. You're so creative!

[@dawnellnunemaker4266]

What a wonderful idea. I wonder if using nail charms word work in there. I'd love to see a sea scape one with little turtles or a frog and lotus mixture. I love the tiny little beads. They look like bubbles. I would love to get this mold to make gifts for family. You're just so creative. I'm so happy I came across your videos. You have inspired me. I can't wait for the next video! Much love from Northwestern Pennsylvania USA ❤.

[@PouringYourHeartOut]

Thankyou so much ❤

[@CrystalQuartz]

Brilliant! So beautiful, I love everything about your mold, color and texture choices! You rock!

[@sherrybriggs5459]

So beautiful I love this ❤

[@janesavage4733]

I think that is the best mould you have ever made. Gorgeous.

[@royal_avi]

I like it, it's so pretty ❤

[@Gumbyhead]

This is one of my favorite things you’ve ever made! I’ve been loving the crystal edge molds!

[@TinaArtuso-tx6vc]

Stunning!

[@teresaparkerson5224]

Thanks so much for sharing. I like the way you do it with the plastic sheet. Maybe you could make a template to go with the mold. Take care❤️

[@fuzznickers]

I love this! The idea of putting pet fur inside is wonderful. I added my dogs fur to resin and because he was an arctic breed with hollow hair stands, I had a slimy, discolored, gloopy mess. I say make it a two part mold with cover because not everyone is patient enough to make the lid themselves. 💖

[@tamiannibali6401]

Love them, very pretty!!

[@gailbrown8710]

Beautiful!💖

[@donnastroud9294]

I so love these. Totally amazing

[@Stephanie_Hancock]

Wow, this is really cool! I love the pretties inside. Great mold. xoxooxooxox

[@adalavin8648]

I love this mold! Just beautiful Julie. 💖😍

[@lovecara1]

Beautiful reminds me of Chinese cork art

[@susanbyers7523]

love this. love the black behind it

[@SharonNetzley]

That is REALLY cool, not to mention very pretty. Your solution with the plastic looks like it works well, but I can see where having a mold for the “lid” would be helpful for a lot of folks. That was probably not very helpful. :)

[@lauraparsons7]

Wow!! You have no idea how happy I am to see a shaker! We are going on a family Disney cruise, and my daughter wants to make mickey Shakers!!

[@koaladeesresinart]

These are gorgeous I love this idea.. Try a photo in one I'd love to see how that looks. So many ideas for these.. Little sea creatur charms, dried flowers, glittery love hearts.. Etc etc

[@rusa85]

It's very nice... fantastic 😍

[@selbar1]

Love this mold. I think only the one piece mold is good as well

[@soniabird6951]

Beautiful 🥰

[@monicagrocuantmonasterio7736]

It's beautiful!! Why not try and do a sea theme with shells, starfish, etc. I would love you to make one. Thanks for sharing ❤

[@PouringYourHeartOut]

Will do :)

[@Sillywabbit5]

Very cool, Julie!

[@diangallo]

This shaker style is just beautiful! Of course, I ordered one!!! Thank you !!💕

[@PouringYourHeartOut]

thankyou so much 🥰

[@paulasilveri7800]

Love this idea!

[@NadineFoster]

The doming really makes it ok to use the plastic. Love that too.

[@ruthheisler4941]

Love this, must purchase one!! I absolutely love your molds ❤❤

[@PouringYourHeartOut]

Thankyou so much

[@sharonnorman3620]

That is beautiful I liked that u poured the resin over the top ❤

[@sylviakelly4943]

As soon as I saw this I wanted one. I don't like other shakers. Yours turned out beautiful. ❤❤

[@PouringYourHeartOut]

thankyou so much 🥰

[@dlbixler7735]

so amazing. my favorite

[@drupaul1651]

Julie I watch you everyday! I would love to know how you make your molds with the crystal edges.

[@RobynNicholson-Reid-bz4hw]

Really gorgeous Julie Can’t wait to see it in black it would be reminiscent of the funeral cameos from the 19th century. You could do two in white or beige as a wedding gift!

[@rebeccahyatt7789]

I love shakers too, although I have not made one as yet. I like things that move and or sparkle!!!I think the black background brought out new colors in your crystals beautifully. I also loved the coaster without a background. The options you have are endless, I think. I would love to see amethyst with pearls in the shaker. Emerald and silver, Rubies and gold. Aquamarine and diamond/pearl. I could go on and on, but I won't. LOL! I think you can get away with the resin top. Then topcoat. The plastic sheet worked well too. Like I said endless possibilities. Seascape colors and shaker.😘

[@OzdogruDidem]

❤❤❤ İ love it soo much.

[@maddieadams75]

Stunning, nice to see a beautiful shaker style. FYI be careful using some glues on acetates. Super glue type glues (fumes) will fog up the acetates, or some other plastics. ❤❤❤ great mold idea!