1956 Ford Pick Up Street Rod

A 1956 Ford Pick Up Street Rod I shot at the World of Wheels Show 2013 in Chattanooga TN...one nice truck...check it out!!...make sure you subscribe so that you don't miss any of the other cool Hot Rods I post daily!!

[@joelhunton8600]

This truck is just restomod. This is a freakin work of art.

[@ScottieDTV]

Right on...Glad You liked it!

[@jordat123]

I'm only 15.. but my dream is to build a '55 F100 street rod, keeping the original fenders, flares etc. but v8, manual, and bagged. Life goals. And your videos are inspiring me to want it even more

[@phillipbenson7624]

Sleak and Smooth as silk. That is one beautiful truck, inside and out. It looks like it just popped out of a mold, but if he still owns it, I think it's time for a coyote to replace that old 350 or at least that's what I would do if I it was mine. The fit and finish is flawless. The builder should be very proud of the excellent work that was done on this beautiful truck as well as the guys that did the interior.

[@ScottieDTV]

Glad you liked it!

[@watergate528]

Nice looking truck. Thanks for showing us Scott.

[@ScottieDTV]

No Problem....thanks for checking it out!!

[@RodderFiles]

shes purrrrty

[@cannonfirexm]

Mike. That's the great thing about cars/trucks. You can do it whatever way you like. You think it's bad with the small block chevy, just wait. The LS series engine will replace the SB chevy in modified cars. Has already started. Just look @ all the car magazines. Bottom line, as long as YOUR car is what you want it to be, that's really all that counts. Brand loyalty is like cheap gas....long gone.

[@ScottieDTV]

Thanks Brother...glad it finally played!!

[@ScottieDTV]

Cool...thanks for checking it out!

[@56hueycobra]

ScottieDTV: That's One Cool F-100 Pick-Up Truck and I Love the Red Paint Job 🚁🚁👍

[@ScottieDTV]

For sure Brother...I like it too!!

[@bikerpap1969]

nice trucks i owned a 53 it was the first year of the round glass wish i still had it sold it several years ago

[@ScottieDTV]

Glad you liked it...

[@larrysullivan6536]

What a beautiful truck love it Larry in London x

[@ScottieDTV]

Glad you liked it Brother!!

[@autoshipperpt]

Very nice

[@ScottieDTV]

lol..I didn't get that lucky...glad you liked it Brother!

[@ScottieDTV]

Stance makes the look...very important....most of my Subscribers seem to like anything that is is cool....to me cool is cool...no mater what it's called.....

[@ScottieDTV]

Cool...I hope that works out for you...can't wait to see it!!!

[@smokemadbuds991]

too clean. want to drive that really bad lol.

[@MrRustybill1960]

Sweet friggin' truck Scott! Thank You for sharing Later Russ

[@RollingArtDesigns]

100% agree with you on that! If they were selling this truck and I found out it had a Chevy mill in it, I'd walk away, I know some people would buy it but not I! I know the LS is quickly becoming a popular swap and I'm OK with that as long as it's still in a GM product! I'm a Mopar fanatic and I'd be pissed to see someone replace a classic Mopar mill with a Ford or a Japanese mill!!! I know it's everyone's preference but I feel it's far better if you use a vintage engine and keep it brand loyal!

[@ScottieDTV]

lol...cool...glad you liked it Brother!

[@ScottieDTV]

lol...glad you think so Brother!

[@ScottieDTV]

Cool...I would prefer a Ford in a Ford

[@satchboogyfan]

Very nice Ford truck I love how so many of these Fords have Chevy motors in them now. I must say that's a great looking Red paint job and generally I don't like red cars.

[@DobermansRock]

The 56 Ford F-100 is the best. Not because I had one either.

[@jusfadez5920]

Nice looking truck.

[@ScottieDTV]

Clean build for sure!!

[@ScottieDTV]

Oh Birmingham is the winner for sure...Chattanooga is a good show though

[@RollingArtDesigns]

I agree 100% with you! I'd rather see someone take the time and ingenuity to use the original engine and do something cool with it instead of cheaping out and taking the easy way out by dropping in a SBC! I'm a big Mopar guy and I've been wanting to get a new Mopar project car to build and I'm thinking about using a 225 Slant Six and possibly try to turbocharge it! Even a new Hemi 5.7/6.1/6.4 swap would be cooler than just dropping a SBC in a Mopar or Ford! Keep them brand specific people!!! lol

[@ScottieDTV]

Cool!

[@cecilshivers5386]

That Red Really Pops.😲😲

[@ScottieDTV]

Yes it does!

[@ManuelHernandez-fv2zf]

A lot of attention was put into that strikingly beautiful red pickup. You must have went from the AMX to the pickup...how handy was that? Anyway, thanks for another great video, Scottie.

[@ScottieDTV]

No Problem Brother!

[@1992Hoffman]

So out of Chattanooga and bham which one do you thank is better.

[@geraldorobertocardoso3332]

Show de esta máquina

[@ScottieDTV]

Glad You liked it!!

[@ScottieDTV]

lol..I'm with ya...I think they should match to...

[@winsto221]

Quick question as I am a "Retro Mod" guy. I have a 47 GMC longbed and spent time modifying an 86 trans am chassis to the truck in order for the wheels to center and be correct width. The rear end was 5k in custom. Came out perfect! How do you feel about the mustang front ends. I think "stance" front and rear and height are important to the truck. Retro Mod, Custom, and Street all have a different fan base. Maybe your fan base would like a video on the differences. Thanks Scottie!

[@joeleuqueriocastrochona5118]

a qui en venezuela como hay carro de eso y son poco lo que le dan el valor que se merecen son una reliquia

[@ristin59]

SWEET!

[@rogerscottburchett1]

NICE!!!!!!!!!!!!!THANKU

[@giorgio3422]

che bei tempi. ...

[@RollingArtDesigns]

I've been a GM fan since I was a little boy playing with Hot Wheels (I'm 36 now) I've had a lot of GM muscle over the years, I'm just tired of seeing that engine in everything, just because it's the cheaper way to go, I know they are reliable! I also love old vintage GM engines like 348/409 Chevy, Buick Nailhead, 455 Olds/Pontiac, etc. but I think they need to keep it brand loyal as much as possible! You don't wanna see a Ford 5.0 302 or Mopar 440 Six-Pack swapped into a Chevy Camaro, right? lol

[@TOBYH]

When i was in high school i bought a 40 olds coupe, it had a 292 ford, 2 barrell in it, single exhaust, glasspack muffler, it sounded good, went pretty well, but WHAT were they thinking putting a ford engine in an olds? I must agree, keep it ford all the way, but a very awesome truck anyhow!

[@ScottieDTV]

David Hatchel I hear ya....Glad you enjoyed this one!

[@robertofelix535]

Muy bonita perrona

[@ScottieDTV]

Right on!

[@MisterPeetBull]

Honestly a Hemi or a 440 in a camaro would be cool. Maybe not at 5.0 only because the LS1 makes so much more power right out of the box. An engine is an engine- the name really doesn't mean much to me. It's about power.

[@ScottieDTV]

lol...too clean

[@RollingArtDesigns]

Argh!!! A Chevy mill in a Ford!!! Oh well at least it's supercharged! Honestly, it's not really all that much cheaper and easier to put a Ford 5.0 302 with EFI and 5 speed from a wrecked donor Fox-body Mustang GT in it! Sometimes you can get the engine, EFI, wiring harness and sensors and transmission cheaper than you can buy a new small block Chevy crate motor! Other than the motor I absolutely love the rest of the truck though! =D

[@MisterPeetBull]

The 350 is much more reliable and powerful. They are bulletproof. My Camaro makes 470 at the wheels with no boost

[@loveachevy]

chevy 350 nice smart guy

[@ScottieDTV]

That suck...I miss several

[@MadsWorld34]

if you remember me you know what i'm about to say about this truck. WHY the hell would anyone put this kind of time and money and make a truck this perfect and then put the wrong engine in it. ford on ford chevy on chevy dodge on dodge NO EXCEPTIONS

[@ScottieDTV]

I agree!....But I do find some exceptions....But very few!!

[@Johnshaft1970]

I HATE THAT !!!!!!!!! I Have a 1954 Ford F100 With A 347 Stroker, AND I WOULDN'T DARE PUT A JUNK CHEVY ENGINE IN THERE 😠

[@tinman678]

I say just be thankful he put American iron under the hood. What if he would have put foreign iron in it ? That would be something to bitch about !

[@ErikSandsto]

00:30 What's Santa doing in Chattanooga, TN?

[@sykwookiee]

Dammit man...this pick-em-up says Ford on top...why in the HELL would you put GM in one of Henrys finest? But I digress...she's still one badass truck....

[@ScottieDTV]

That's it's only short coming for sure....

[@alaskanmuscle70]

I agree strongly. BLUE OVAL all the way!!!!! Ford body Ford motor!!!!!!

[@patricktousignant3987]

I gotta 56 with a 429 ford, for sale?

[@Johnshaft1970]

What a waste, that super bad truck with that cheap boat anchor of a Chevy engine in it 😒

[@Johnshaft1970]

@@alaskanmuscle70 THAT'S RIGHT, FORD ALLLLLLLLLLLLLLLLLLL THE WAY ✌

[@Joe11Blue]

I personally love the 455 Buick, but I agree with you. Tired of seeing SBC's everywhere, and even more tired of seeing them in trucks that have Ford emblazoned all over them. The design philosophies are completely different and it just makes me sad seeing the two being mixed. It screams of just 'cheaping' out and just doing the Hot Rod thing because you are bored, or because it's the cool thing to do rather than actually having a passion for it. Also tired of seeing dropped and bagged trucks.

[@enriqueleoncampos710]

What kind of wheels are?........Make.

[@ScottieDTV]

+enrique leon campos No idea...Sorry..

[@enriqueleoncampos710]

Thanks.

[@lunasol7740]

quiero una asi

[@ScottieDTV]

lol..

[@ScottieDTV]

lol

[@CamoShirt]

if you wanted a chevy build a chevy haha supercharged and still only about 400 hp and the v6 mustang makes about 305 these days.

[@Joe11Blue]

It's not about brand loyalty, it's about keeping the soul of the thing the same. Ford's design philosophy is not the same as Chevy's design philosophy, and the two do not really mix that well. Chevy is about being generic and having that common design points across all models. Ford is and always has been about improving engineering and pushing forward with innovation, and it shows with their engine designs and the look of the truck. The two should not be mixed.

[@garycotham4546]

Just not right with a chevy motor it should be Ford all the way.

[@ScottieDTV]

I wouldn't argue that...Still a cool truck...

[@cjthoma89]

Again I know it's all up to the owner but if your not a ford person don't buy a ford!

[@ScottieDTV]

I hear ya....still a nice truck

[@cjthoma89]

beautiful truck

[@ScottieDTV]

Cool!

[@ScottieDTV]

lol