you are doing great! Don't give up... every panel will get easier until you get to a point where you look back and say I can do that better... and you will!
@pucman12 жыл бұрын
Thanks Mike I almost threw in the towel bit after a few garage beverages I got back to it
@roundtailrestoration2 жыл бұрын
Looks good to me. Can't tell you how many times I went back and did re-work. Keep at it and take notes on your weld setups and eventually become second nature.
@pucman12 жыл бұрын
Thx I just need more light and to remember to turn the gas on!!!
@roundtailrestoration2 жыл бұрын
@@pucman1 lol, I forgot to turn the gas on just the other day. You can hear the difference, let alone see it.
@pucman12 жыл бұрын
@@roundtailrestoration reminds me I need bacon
@roundtailrestoration2 жыл бұрын
@@pucman1 lol
@cpace40312 жыл бұрын
That was awesome. Cousin, you are talented. Keep up the good work!
@pucman12 жыл бұрын
Thx
@cheftush2 жыл бұрын
Hey! Nothing wrong with that repair! Looks good to me. Much better than the big gaping hole that was there. Keep on Truckn’
@pucman12 жыл бұрын
Thanks Tush
@frankcanale34672 жыл бұрын
Doing great JP. The hardest part is taking a chance, trying to learn to weld is a big step especially on a prized project like yours. Keep at it and it will get better. The front body mounts will be on the way tomorrow. Frank
@pucman12 жыл бұрын
Something new i am gonna try power welding hour>>>>
@scotthasse2802 жыл бұрын
What you've got there ended up fine! Welding thin material is hard no matter how you slice it, especially in place vertical. Practice is the key, and in my experience you just have to bite the bullet on the welding consumables and practice stock and put in the time. The good news is that thin stock is relatively cheap :-).
@pucman12 жыл бұрын
Ok thanks for the advise. Cheap is what I need, have you seen my boy, food is expensive
@davidplummer24772 жыл бұрын
Looks great JP, keep on going it gets easier!
@pucman12 жыл бұрын
Thanks Dave.....I have plenty more to practice on for sure
@johnmckenna8989 Жыл бұрын
...I made a cardboard copy of my battery box, then had a local sheet metal shop duplicate it in 16 gauge (not 18g)....Cut the old one out and this fit like a glove, so welded it in and put the plastic liner back in.....My car's a driver and this just might be the strongest part...haha (the sheetmetal guy had owned a TR3 once and was happy to make it...cost $60.00 )
@pucman1 Жыл бұрын
That is thinking outside the box 😀! Good job
@johnmckenna8989 Жыл бұрын
@@pucman1 ....That's a pun, right ?
@pucman1 Жыл бұрын
@@johnmckenna8989 yes but I really thought it was innovative as well
@mikestrang62292 жыл бұрын
it takes alot of practice to weld sheet metal well I still have problems from time to time. say are you still wanting the metal for your front body mounts I have not heard from you on those.
@pucman12 жыл бұрын
Thanks but I was able to barter with a friend….
@mikestrang62292 жыл бұрын
@@pucman1 sounds good
@frasercocks2 жыл бұрын
Have you tried placing a piece of flat copper behind the welding area to absorb the heat for filling in a hole?
@pucman12 жыл бұрын
Yeah that actually worked on a couple spots, I think these other spots are just paper thin…..