1959 MGA restoration front suspension and steering assembly.

[@Gtsteveb]

Nice work Wayne 👍 Oh the stories a car could tell with it’s battle scars!

[@whatswaynedoing]

Thanks and so true the stories.

[@mikeakaspike]

Appreciate these videos Wayne! Subbed!

[@whatswaynedoing]

Thanks, I appreciate the comment.

[@rac1083]

Thanks for the video. Could you share the link to buy the reamer?. Thanks

[@whatswaynedoing]

uxcell Adjustable Hand Reamer... www.amazon.ca/dp/B07JP7M77M?ref=ppx_pop_mob_ap_share

[@rac1083]

Thank you Wayne @@whatswaynedoing

[@billyreeves4360]

sure looking good to bad about the spring .bill

[@whatswaynedoing]

Thanks and I'm not too worried about the spring. I'll be driving alone 99%of the time so it might be a good thing.

[@rac1083]

greta job, Iam just getting ready to start putting together the suspension on my 58 mga. One question, do you oiant the bolts after installation or you leave them clean?

[@whatswaynedoing]

I'm thinking I will paint them but not decided if I will brush or spray.

[@rscruiser3533]

With the floor jack lifting up the lower A-Arm and no weight on the car to really speak of ----- Looks like the Bar Clamps worked ok ---- the first one you did you say --- Sketchy --- reposition in closer and you were able to close up the gap ----- Second side you didn't show us ----- was it easier or did you have to fight it a little ------- I will keep this idea in mind ---- I'm hoping to get a MGA first part of June ------ Let me know what you really thought about --- in using the Bar Clamps ------ Not sure how they are rated ---- what size / length are you using there? ------ I take it that you are using --- Rubber Bushings --- in the Control Arms? ----- Thank You for the video --- And hope you have a Good Memorial Weekend ----- Rodney

[@whatswaynedoing]

The bar clamps did work okay the second side I didn't record but I did them differently. I used a 2x4 to the ceiling to hold the frame down and just jacked up the suspension and that worked extremely well but you have to know your structure or that could be risky

[@stevefoster7603]

Wayne size reamer did you use?

[@whatswaynedoing]

19 to 21 mm (from Amazon)

[@whatswaynedoing]

. www.amazon.ca/dp/B07JP7M77M?ref=ppx_pop_mob_ap_share