1967 Chevelle SS396 with 548cid motor & 2 stage Nitrous - Drag Racing (1300hp)

[@jeffreyb6165]

The 66 and 67 chevelles have that menacing "Go ahead, make my day" look, and in 1970 with its " I may be drop-dead gorgeous but I can still kick your a$$" look, it made the chevelle the undisputed king of american muscle.

[@Lisa4Me2]

One of the sweetest '67 Chevelles I ever seen.

[@TheRoguelement]

Check out the white with black top 67 4 sp Chevelle at pump gas drags it's just crazy fast ...

[@jimmyclark9595]

67 chevelle is the greatest car ever made ,I love them,I use to have one back in the 80s wish I would have kept it.

[@fastrat37]

Nice job! Hooks hard and goes straight....I like it!!

[@hellfire7560]

Verrryyyyy nicely done Chevelle. Must be quite a rush to be moving that fast in such a short amount of time. My dad has a '67 also, but it has a long way to go compared to what you've done with yours. Excellent job. Thanks for posting this.

[@mikefree392]

This what made me get my RC drag body, I remember watching this so long ago. I thought it was grey back then. The first drag video I watched.

[@Chevelle1967-Hardtop]

Now thats one Bad Ass Chevelle,, I have one the same color and runs 7:41 in 1/8.. love that sound.....

[@billybrown1049]

This is exactly why I own one! 67 chevelle SS and 72 Malibu. I love both🇺🇸🇺🇸🇺🇸

[@SDJ636]

I remember this car racing at mission, great chevelle.

[@powerwagon3731]

No replacement for displacement! Sounds great !

[@stevesolo16]

To me, this is what drag racing is all about. A Vintage 67, big block motor and a well build back half to keep her going straight.

[@derekspratt]

Thanks for the compliment!

[@dw9549]

That chevy is sick!

[@cjayabad6988]

Nice video!

[@wisheye1]

Amazing Chevelle! Love it!

[@derekspratt]

Thank you so much!

[@donbliss8506]

That's nuts in a good way

[@jeffspicolli593]

Mean lookin Chevelle.

[@Rell2362]

Nice car bro

[@Snowmanofsteel]

That is an awesome chevelle

[@jamesgrates7170]

I think built by Danny at pro gas nice work as always

[@derekspratt]

Yes, at the point that I did the Chevelle I wasn't a welder and Danny did all of the fabrication work and also drove the car most of the time. Danny is very talented.

[@a.k.a.A.E.1]

What a beauty !

[@robertkinney9925]

I had a 67 Granada gold with the hated gold interior like this! Bought new in Norfolk, VA and sold in 1970 in Newport News to buy first house. Always wondered if it has survived.....could it be?

[@SuperK9111]

AWESOME

[@mrdavisk43]

Love the videos...I need better quality ones. I see you are running Hoosiers. What size? Did you make any modifications for clearance, etc?

[@larrywillhite5566]

Good running car

[@heathermetz6576]

SWEET....

[@TheRoguelement]

Are you guys forced to run mufflers at that track ? And you have one screaming chevy ..

[@koletrane1286]

Is he spinning the tires because he had a bit of an agressive ramp on the nitrous? Pardon if I am mistaken. Badass car

[@derekspratt]

We were playing around with a 3 stage nitrous system and getting a progressive ramp off the line was a bit hit or miss - sometimes the tires and track would take more nitrous, earlier, and other times we would have to delay the initial hit and slow down the ramp.

[@koletrane1286]

@@derekspratt Thank you for the reply. Awesome car.

[@chevelle67ism]

Rippin loud.

[@Rell2362]

What size headers you running?

[@derekspratt]

2-1/8" - we chose to keep the whole exhaust system 'small' - 3" Borla mufflers (x4), etc.

[@davycrockett3230]

Now thats BAD TO THE BONE!

[@paulhewson4600]

Derek which Cam were you running in that?

[@derekspratt]

The original cam was 244/244 @ 0.622" - 110, then 257/265 @ 0.652" - 114 (nitrous grind), then 262/270 @ 0.714" - 114 and finally 290/300 @ 0.900" - 110 which was too much in the end ...

[@paulhewson4600]

@@derekspratt Thanks Derek

[@seantallon7035]

What size tire did you run in this video? Did you have to make any modifications to fit thoes bad boys under that beast? Got a 67 of my own just lookin for some advice thank you!

[@derekspratt]

We were running in a super street class that required DOT drag radials with no more than a 11" wide tire (measured after the race - and we got nailed once with an 11" tire that grew to 11.5" so ended up with 10" tires from then on). I didn't want to tub it so that was fine with me. We used 28" Hoosiers and they worked out pretty well. With full slicks we go much better 60' times and ran 9.0s vs 9.30s with the DOT tires.

[@seantallon7035]

Derek Spratt awesome thanks! Great looking car by the way man she's a monster!

[@banshee100hp]

What is your rear gear that your running? I'm building one now procharger set up. Thank you!

[@derekspratt]

+banshee100hp I don't remember but you can back calculate from the following: 29" tires, 3 speed TH400, roughly 7,500rpm at 160mph = 4.11s in a Williams Pro 3rd member with ladder bars.

[@banshee100hp]

thank you!

[@TheRoguelement]

What exactly do you mean by emissions legal ? You see DMV at least on the east coast goe's by what ever emissions standards were applicable for the model year of the car your driving hence you pass or fail via the model year requirement OK now what were the emission requirements for the 67 chevy model year in California in 1967 ???? THERE WERE NONE ! But really sweet 67 anyway even with the bogus emissions statement !

[@Ezo168]

Sweet...

[@williamanderson7294]

Fast street car

[@marksansone9066]

bad ass!

[@anyshitt]

I love it..

[@craigewen4187]

I knew it was mission raceway im a local that lives in the area .

[@zxtenn]

That engine REALLY passes emissions? I assume for a 67 vehicle -- that is some serious power-- it that a 2 speed or 3 speed?

[@anthonyhermes3593]

come on, seriously? these cars aren't recuired to do emission tests

[@kershawvalentine]

BWAHAHAHAHA

[@Rell2362]

How much compression

[@derekspratt]

12:1 - still streetable though as the big 288 cams bleed off compression at low rpms

[@davebrunette6394]

😎🤘☠️

[@chig9357]

damn!

[@rayp.454]

Bad Ass!

[@thetroll9160]

fast

[@fastwilly2001]

Get rid of those side exits!..... your gonna put it into the wall Cochise!

[@monster3478]

Sounds like it needs lower gears

[@ajtoy454]

looks like when u change the pill it gets a little sideways...lol...nice yo....

[@marcomarcochevy1221]

Fast

[@345CIDHemi]

Check out the vids I have up of my 67! Yours is really nice by the way!

[@shanesmith817]

That bitch was moving you should put a bigger tire on it though still a nasty Chevelle in general

[@derekspratt]

+Shane Smith Yes, that car needed much bigger tires - even at the top of the track it was impossible to put all of the power down to the track - it was sliding pretty much all the way down the track even with the nitrous backed off. But we wanted to run 'street tires' ...

[@UcantBeSerious03]

this is the best porn on the net

[@ImDeadAtBirth]

sexy.

[@Chevelle1967-Hardtop]

Dude cant drive!