1982 Suzuki FA50 Ride around the block #fa50 #noped

[@petev.9357]

With the deep sound I thought it was going to take off. It's slower than your QT. You seem to have 1 from every make. Don't know if Kawasaki made one.

[@Putt-Putt-Vroom]

I have a bunch and like to tinker with them to get them running again. When i got the FA50 it came with a clone carb,. I went to check the main jet last week and it doesn't have a number on it so I'm not sure what jet is in it. I think that's causing it to 4 stroke early. The qt50s both seem faster then the suzuki fa50 and honda express 2speed but they are all fun. I don't think Kawasaki made nopeds but they did have a 50cc geared bike like the Honda mb5 called the AR50

[@firebadgergaming903]

@@Putt-Putt-Vroom I'm having the same issue. Did you fix the problem?

[@Putt-Putt-Vroom]

@@firebadgergaming903 Hi, Im stil having the same issues and 4 stroke around 20mph. Last time i messed with it I tried raising the needle to top position, tried a oem main jet I got off treats but it still bogs at 20mph. I adjusted the mix and air screw too and cant seem to figure it out same problem. I was going to try and get a different carb off treatland and see many say they have good luck with them or an oem one from ebay but oem cost too much. I think it maybe the idle jet because it came with a amazon carb on it and none of the jets were labeled.

[@firebadgergaming903]

@@Putt-Putt-Vroom I ordered a used Suzuki carb from ebay. Hopefully it will arrive soon.

[@tony8512]

Is it oil injected? What is your mix ratio? Thank u

[@Putt-Putt-Vroom]

Hi Tony, Its oil injected and when i checked the pump was working. But I do occasionally put in some 50:1 just in case. Been trying to fix a gasleak as well. Float or needle seems to keep getting stuck even after I clean it well. Seems to randomly start leaking every 5 rides or so. Everything looks clean and also clean out the needle seat with qtip and drill. I think it maybe because its a cheapy clone carb that came on the bike.

[@tony8512]

@Will Gibbs thank you sir great video as well

[@kevinnashskitchen3517]

Faster than the Kepler?

[@Putt-Putt-Vroom]

Much slower at the moment and im still trouble shooting some issues. I think it supposed to go 28mph stock and only doing a little over 20mph and can't figure it out 4 stroking bad. Think maybe something to do with timing, reeds or carb which has all replacement stock jets and didn't fix the issue, kepler is much quicker with everything especially hills. The kepler is like double the size too

[@kevinnashskitchen3517]

@@Putt-Putt-Vroom lol.. Cute little bike. I'd keep it and fix it up