1984 GMC Sierra Square body LS1 Swap w/Black Widow Exhaust

[@JustAGuy781]

This is a beautiful truck. Honestly it looks stunning with the way it is now without paint. Very nice job!

[@damonhappy9049]

Looks good just the way it is. It doesn't need any trim

[@JustinTopp]

I’m not always the biggest fan of black paint jobs but that looks sharp! Beautiful pickup

[@jnork5005]

Honestly, I would if chose white but I didn't want to repaint the dash 😆

[@rayshawndorsey8167]

Looks good I just got me one and I can’t wait to fix her up thanks for sharing your ideas .🔥🔥🔥

[@HD-C10]

This is probably my favorite interior that I’ve seen on a square body.

[@jnork5005]

Simple and clean

[@collinwilliams2939]

The fact after all the work, you left the same door chime makes you a boss.

[@adrianwright5780]

Are you pleased with the results? Looks good on video

[@collinwilliams2939]

@Adrian Wright I love it. I did a build a while back, and trust me, I did everything I could to keep the door chime just to through people off.

[@Caponapo]

The third row seat is a great idea!! 💡 it looks custom made for it!

[@andrewgodfrey4789]

Sounds really good! I love the Black widows on my square body!!

[@andrewayersman6923]

I just built a 500 horse small block for my 83 4x4. These trucks are the funnest toys to just go ripping around in. Very nice setup you have there 👍

[@jnork5005]

I just finished building the fuel system, transmission, and engine. It's no longer LS1 but it's a gen 4 6.0 LQ9 with some go fast mods. Imma do an update video.

[@andrewayersman6923]

@@jnork5005 can’t go wrong with a 6.0. I’ve got one and I also have a cammed 5.3. LS is the future lol

[@andrewayersman6923]

@@jnork5005 just watched your new video. That is one clean truck and a hell of a nice drivetrain build. I’m sure it smokes the tires off just as well as mine does lol when you said tired of putting money into for it right now….I sure felt that lol

[@jnork5005]

@@andrewayersman6923 lol. I go through phases. Right now, I'm finished. I want to do vintage air and run that BMR front and rear coilover setup but I gotta chill it awhile.

[@SVTVSPENNY]

I have an 85’ glad I found your channel, love the look of the truck! 🔥

[@Cris_carman]

this is a peace of art no joke the looks are insane I like it

[@jnork5005]

Thanks, I appreciate it!!

[@MintMonte87ACSS312]

Sounds nice. Think I’ll put these on my 08 Silverado once I rebuild the ls into something mean 💪

[@WilloW0024]

Nice touch with the Burb 3rd row.

[@jonathanmontes6547]

I like the way it is does not need wheels or anything.

[@user-xi4rj4qd3p]

Man that was a good idea for seats! They look great and i wouldn't have guessed third row seats.

[@jnork5005]

I been seeing them around more often now days. The back seat of a 14 up crew cab looks really good too. It's low back.

[@user-xi4rj4qd3p]

@@jnork5005 Good info! Trying to figure what I'm putting in my 67, if I can ever get it on the road...

[@jnork5005]

Just chip away at it. 1 small project at a time. It took be 3 years to get it on the road. It's down again and I'm swapping in a manual transmission.

[@jgnzz5351]

Any way you can make a video on the seat installation, it looks great. Truck look very nice!

[@trentdawg2832]

Man that is a beautiful truck…..nice build…i have a similar one but white and its a ‘73 with a vortech supercharged 5.3……i like that seat idea…i might have to look into doing that……mine has a terminator X system with a 220/220 cam , 3000 stalled th350 with 12 bolt 3.73 rear….it scoots….i have a 370” LQ9 that im gonna put in there once i finish building my 408 to replace the 370” thats in my nova…its a 11.15:1 compression LSA supercharged motor and it runs like hell!!!

[@truspirit1925]

Beautiful truck man very clean and straight you did a great job on it.

[@travisquintero8334]

Beautiful beautiful truck... I would have a satin finish over the Chrome areas myself. But that's just me.👍🇺🇲🇺🇲🇺🇲

[@jnork5005]

Maybe one day I'll change it up.

[@hastyhillfarmand4x480]

The only thing I would do Is put some 2 inch wider and 2 inch taller tires on deep dish 15x10s, but... Would I sit there in person and think to say that... Lol , no, I would be drooling and trying to hide my chub.... Badass truck dude.

[@jnork5005]

Haha. I did just that with with Basset Race Wheels. I posted up a video of it here just recently

[@frankguerra3314]

I love it..I just got done putting a LS in My 03 dodge Dakota.....

[@jnork5005]

LS Swap the world. Unbeatable value compared to other swaps

[@DFox-ud3gx]

I like them rims on her mine are silver just like them but now I'm going to paint mine just like yours , great video here

[@jnork5005]

I think the wheel and tire package would have been fine it I had a larger tire. I've since changed the wheels to Bassett Inertia with 275/60/15's all around. Looks pretty sporty. I have a newer video where you can see it.

[@DFox-ud3gx]

@@jnork5005 thanks Sir

[@ericgonzalez524]

looks bad ass without the center trim

[@michaelsoto8299]

Wow what a beautiful truck and bunch of goodies on it cheers

[@jnork5005]

Check out my new video. It's even better now

[@rro9434]

Beautiful Job. You are amazing brother Really Nice and Clean Job

[@Infinitevoyager]

Building an 82 GMC Sierra just like it, only has single headlights. Put in a dbw stock 6.0 and a 4L80E. Thinking about putting on a hydrovac brake booster, have a couple of them.

[@jnork5005]

Hydroboost is the way to go. I wish I had that setup.

[@patrickgrenier4331]

Mine was an hight Sierra 81 locking the same with 4 beam in the front and a car bumper in the rear but with huge rubber at each corner and with electric windows. I should have keep it 🥰🤑

[@wildwhiskeywolf]

Incredible build. Super clean.

[@danbuchner1494]

Kool truck that seat looks really good in it

[@simonsautorepair8082]

Hi sir I love that color what did you use can you share the part number of the paint..???

[@jnork5005]

I don't remember the part number but it's made by "Kirker Paint" and it's the single stage "Black Satin"

[@simonsautorepair8082]

@@jnork5005 thank you

[@joeyhaywoodakamashedtater6132]

Awesome build. What did u do about the drive shaft

[@jnork5005]

I had one made. Steel with Spicer joints

[@crimsonbluejay]

Dime of a truck🔥 nice build. Subbed

[@MacStrengthCo]

Sounds and looks awesome. Nice build. Subbed

[@martincruz1438]

You have a Nice truck ,,,i have a 85 for 25 years i like to swap the motor from 98 tahoe is to complicate can you have information please,,,thanks

[@jnork5005]

It's not terribly difficult. There are a bunch of videos on how to do a swap. I'd search out those videos.

[@carlosmaldonado6954]

Men I really love you truck looks awesome 😎 more videos of that beauty, also you have a new subscriber.

[@michaelheathington9546]

Beautiful truck! Can't wait to finish my 84

[@jnork5005]

Thanks, I've got it torn down building the engine. Taking video and should have something put together to post when it's all done

[@baldeaglegarage]

Nice looking truck! Sounds tough too!

[@MillerGarage269]

Love that look. I want the same color with chrome smoothies on mine someday

[@jnork5005]

If I did it over I'd use a 2 stage system and spray it with a satin clear instead of a single stage urethane. I'm running Basset race wheels now, but I like the smoothies or stock dog dish look

[@RedEyedPatriot]

Love my 82 Gmc. 5.3 swap goin down in 2 weeks. 5speed too. Video of it on my channel. Rust Free but I call her the Flaked Tater 😂😎🤘

[@jnork5005]

Lol, I'll check it out. I want to run a standard shift in mine it's just not in the budget right now. Maybe after suspension and brakes are done.

[@RedEyedPatriot]

@@jnork5005 I've got a 89 nv3500 5speed..only rated for 300ft pounds of torque. Wish i could find a 6speed or nv4500 to use.

[@lmb1911]

Great sounding truck. Are you using a x pipe or H pipe?

[@jnork5005]

X-pipe

[@jimstark1887]

Beautiful truck, sounds "bitchin"! I had to subscribe so I can keep up with what all you do to it. Have a good one.

[@jnork5005]

Thanks, I appreciate it!

[@mechanicalmike7320]

Nice work! One of my favorite trucks.

[@josearredondo2251]

I love this truck! Nice work!

[@jdonez8347]

Beautiful fkin truck buddy, saw the thumbnail and it drew me right in, had an 83 all black w a 454 in my teens but unfortunately she rolled once or twice, wasn't as nice tho. Seeesh 🤩🤤

[@truspirit1925]

I would to see this on 4x4 frame...I'm building one now that looks similar but this one ....yours....is much nicer....beautiful truck.

[@jnork5005]

My dad has an 86' K10 we are going to start working on after the first of the year. So I might throw up some video of it too. I just finished rebuilding the drive line and rewiring mine. I'll do a video soon.

[@TRIPLE6LORD]

Sounds tough asf

[@oilfieldtrucker3225]

She's a beauty!

[@keepingitstreetproductions1414]

Great job on your truck

[@Chevyboii]

How much would you charge to do another truck like that with a 355 instead of a ls?

[@jnork5005]

It's hard to say. Depends on a lot of variables. My truck is torn down again. I'm in the process of building the turbo hot side piping and T56 swap. So it'd be awhile before I could get to it. I'm in Florida also

[@CarolinaMikeGarage]

That’s clean man. I’m building one on my KZbin channel as well. It’s a GMC as well same year and I’m putting a 6.0/4L80e BTR stage 2 cam. I picked it up rattle canned matte black but I want to get it painted with a satin finish.

[@jnork5005]

Nice. I just built this 4L60E with all 4L70 internals and added the Sonnax close ratio 6 pinion planetary and added a couple clutches to the 3-4 drum and made a bunch of pressure modifications. I hope it holds up 😬. If you do it, use a base coat/clear coat and use a satin clear. Easier to lay than this single stage. Good luck with it! Hard to find these trucks now.

[@Trystatetrucker]

Beautiful truck man

[@hotrod_kris9395]

Clean truck! What's your wheel tire setup? Thank you

[@jnork5005]

They were 17x9, Jegs Baja 8's I think. Something like that. I bought some Basset Race Wheels and have a different setup now. I should be posting a video soon after I get this motor assembled.

[@hotrod_kris9395]

@@jnork5005 thank you for your time!

[@colefrench8617]

Wat kind sterio is tht is ur truck I love tht design

[@jnork5005]

It's a Retrosound stereo. I think the Laguna series. Can't remember

[@enermaxstephens1051]

What seats did you bolt to the OEM seat fram, and are they comfortable on long drives?

[@jnork5005]

I've taken it on 3-4 hr rides and it's fine if you like a firm seat like I do. It's the 3rd row seat out of a 2014ish Tahoe

[@patrickmacord8725]

Great video, who makes the gauges

[@jnork5005]

Dakota Digital

[@sergiodiaz3904]

I installed a 10 dollar aftermarket antenna from Walmart it's easy to install

[@jackperry9369]

Nice clean look thanks sir

[@marc96accord]

Nice

[@chancecolwell3823]

Can you do a video on the wiring you had to go to put the ls in it

[@irvingolivissr.3172]

@JNork I heard you say that you do tuning and I was wonder info you hand a contact info for some business? Also if you don't mind what is the camshaft part number?

[@jnork5005]

I don't have the part number but it's the "Tsunami" camshaft from Texas Speed. I don't typically do tunes on any past Bolton. It gets too time consuming and a lot of people aren't good mechanics so I end up troubleshooting all their problems. Lol

[@irvingolivissr.3172]

@@jnork5005 kzbin.info/www/bejne/bpnde5KOnLiGmqc this is my car with the conventional motor in it. I want to swap it that why I was asking about the tuning. I did all my work.

[@juliangarza1144]

Where did you get the dash from ? Sweet ride

[@jnork5005]

It's Dakota Digital. It was ordered from one of their suppliers, just don't remember which. I'd have to dig up the receipt.

[@Weldingprobably]

Sounds good

[@jnork5005]

@@Weldingprobably in this video it had venom 250s with an x pipe from black widow exhaust

[@williamj7071]

SICK❤

[@cnkilts]

Gorgeous truck.

[@jamesdavidson9626]

Fantastic build my new friend..I liked an Sub'd..thats badass..lol

[@maleikfaheem8975]

Love the truck bro! I bought the same seat for my 86, do you have any info on how you made the bracket? Thanks

[@jnork5005]

I used the factory frame and welded brackets for the new seat to bolt to. I'm 6'3 so I didn't need any adjusters and mounted it solid to the floor. It still flips forward to get behind the seat tho

[@maleikfaheem8975]

Thanks a lot

[@TallGarage]

@@maleikfaheem8975 what is the seat from?

[@justinvanburen8259]

Bad ass truck!!!!

[@truspirit1925]

Love that seat...

[@nonameisthename138]

That's a nice truck bro!! I hope you still have it..🤞

[@jnork5005]

Still do, just took it to the drag strip a couple weeks ago.

[@nonameisthename138]

@@jnork5005 That's great bro, so many guys invest in their rides then sell them for whatever reason. I have an OBS....92, I'll have it til I check out!!

[@jnork5005]

@@nonameisthename138 same here. I'm done starting over, lol

[@nonameisthename138]

@@jnork5005 😂😂 I know what you mean 👍

[@coltkline9207]

Can you tell me what year Tahoe the seat is out of? Thanks.

[@jnork5005]

2015 I think. I think the rear seat out of a crew cab 2014 up silverado would fit better since the back isn't tall.

[@krisyaz1545]

Very nicely done.

[@jnork5005]

Thanks, much appreciated!

[@4ME2DRV]

I love it just like that.

[@jnork5005]

I changed the wheels so far. I have a set of Basset Race wheels now.

[@adrianwright5780]

Nice truck!!! can you send the paint code? She looks damn good

[@jnork5005]

It's "KIRKER BLACK SATIN" it's a single stage and they only make 1 black satin and you can buy it as a kit.

[@alchampion340]

Nice truck, sounds 👍

[@Jessesquarebodytube]

So beautiful!!

[@johnmaxwell258]

yessss dude loooks slick

[@williepotts2185]

Pretty Nice dude!

[@jrobles1019]

I have the same setup except I’m using Brian tooney turbo cam, and Holley terminator standalone

[@jnork5005]

Are you going to boost it? I ran a boosted 5.3 that melted #7 piston twice on 93 Oct. Narrowed it down to the coolant cross over. Truck motors don't have a crossover and I had an air pocket and melted that piston twice pointed at the water jacket. Also, tune it for E85 and you won't regret it.

[@jrobles1019]

@@jnork5005 life is way better with boost. Yes I plan on boosting it! Did you hook up your steam lines correctly?

[@crsmith56]

Would you be willing to share your lowered suspension set up?

[@jnork5005]

4/6 drop. Flip kit in the rear, 2" spindle with a cut coil up front. Bilstein shocks, don't remember the part numbers. Comfortable better than stock ride.

[@crsmith56]

@JNork Thanks sir. That makes a lot of sense actually. I did a beltech 4/6 drop as well with rear flip kit. My issue was the front sat too high. Knowing that you cut your coils makes sense. Love the stance.

[@Joekool300]

Nice man.

[@steppydaddy972]

Awesome 👌

[@marvinyoung4170]

If u never got a antenna man I got one u can have I have a 1982 gmc long bed the daddy to urs it’s a 2500 long bed with 454 beast black on black but u got a badassssss truck too

[@jnork5005]

I still need one!!!! Do you have any social media platforms I can contact you on?

[@marvinyoung4170]

Yes it’s Lee young in alabama u will see a red c10 truck

[@marvinyoung4170]

Facebook

[@GeedsGarage]

So how is the comfort of that bench after this long?

[@jnork5005]

I've taken it on a few 2.5hr drives. It's firm but I like that

[@GeedsGarage]

@@jnork5005 thanks, I’ve been looking around for one for my 86, and waiting on some replies back from some local yards.

[@jnork5005]

@@GeedsGarage I think the back seat I a crew cab 14 up would look better. It also has cup holders built in

[@phoenixarizona8441]

Badass Truck

[@JayTX.]

Got buckets in my 85 but wanting to put a bench in ....the Tahoe seats are a good idea

[@jnork5005]

I'd like to see the back seat put of a 14 up crew cab. They're lowback

[@ulisesjaramillo9743]

Do you have more info on seat mounting

[@jnork5005]

I'll make a video soon

[@ulisesjaramillo9743]

😎

[@evangriffith8836]

I just cut and pounded the center of the bracket flat. Made tabs and mine fit right it. Not my favorite way of doing it but it works.

[@fr3k5h0w]

Super interested in what the wheel tire specs are! Beautiful truck man.

[@fr3k5h0w]

I know this is an old video but I wanna drop mine 4/6 with some 17's

[@jnork5005]

@@fr3k5h0w I really don't remember what they were other than they were 17x9s. They were the Jegs or Summit Soft 8's knockoffs.

[@fr3k5h0w]

@jnork5005 it's a great looking stance! What was the drop? More I thought about it I don't want to slam it.. I'm looking to do a shackle and hanger only drop in the rear I can get 4 inches out of that mostly because I want all the travel. For the front just a 3 inch drop spindle

[@jnork5005]

@fr3k5h0w it's 4/6. Spindle and cut springs up front and a flip kit in the rear. I'm running 15x8 op front and 15x10 in the rear with 275/60/15s all the way around. I have a video or 2 with that setup on my page. I like that look more

[@fr3k5h0w]

@jnork5005 oh yeah man, lots of rubber and width. I do like that as well but I don't want to lower it too much. Also don't like too much wheel gap is why I'm choosing 17's with decent meat on em. Going between a 3/4 drop with spindles/shackles and hangers Vs flip kit and spindles with lowering springs but I'd like to retain all the suspension travel. Leaning with no flip kit

[@juniorquiroz6603]

Where did you get the LED headlights ? Wanting some for my ‘87

[@jnork5005]

I got them from Amazon. I recommend the harness jumpers to go with them so you don't have to modify your chassis harness.

[@ari1234.]

I did it that way on my 86..with leds and the harness but my low beams not working and I changed the dimmer and headlight switch Going crazy

[@jnork5005]

@@ari1234. I did have to play around with the connections to get them all working correctly. Unfortunately it wasn't plug and play.

[@therhinoic9159]

@@jnork5005do you have the link

[@jnork5005]

@@therhinoic9159 I just looked in my order history off eBay, the auction is no longer active. They're 4x6 LED headlights. You might be able to search up something similar

[@HILLBILLY_HARD]

Nice truck

[@RedPillVegan]

I like the truck

[@ThatC-rc2ig]

Where did you get those headlights I have to know

[@jnork5005]

Either Amazon or Ebay. I want to say they were around 80bux. You have to get longer screws for the beauty rings and the fit into the stock bucket. You will also have to run harness adapters to use your stock chassis harness. They are super nice though

[@XavierTerry-ds5sz]

I like it!!

[@Slim.t07]

Where did you order the grille from?

[@jnork5005]

It's the OEM grille from an 84 GMC. The emblem is removed and painted black is all.

[@SaSaUrmULi1]

🔥💯beautiful beast 🤙🏽

[@CODE-BROWN]

Is it a satin clear to get the matte finish?

[@jnork5005]

It's a single stage satin finish from kirker.

[@killashizilla3830]

Sounds sooooooo mean!!!

[@leonv62]

What year suburban did you take that seat out of??

[@jnork5005]

Around 2014

[@javieraraiza3142]

What exhaust you running

[@lsx5.3colorado13]

is that the race venom mufflers

[@jnork5005]

I just know they're Venom 250s. Running an X-Pipe.

[@newmantv5668]

like that matte black