1993 Cervini Cobra Kit Install - Custom Fox Body Restoration

Part 1 of Fox Body Mustang Cobra Conversion/ Restoration. This series will cover the entire restoration process. These videos will cover everything from bodywork, paint, interior, engine building, brakes, sound system, custom twin turbo kit, and suspension. Part 1 will focus on the installation of the 1993 Cobra Mustang body kit made by Cervini's.
Contact me here!
[e-mail]

[@fd-vy9up]

Well done oz I have an 88GT all original I have had for 30 years 98,000 miles

[@customsofozgarage3522]

Thanks for your support! I’m new to the KZbin thing, hopefully these videos aren’t that bad. Hang on to that car! I wish I still had my first one.

[@thefoxlife3431]

Great start to your build. I look forward to watching it come together. 👍

[@Lethal_Venom]

This was informative, I just picked up a 93 Foxbody and am looking to do a cervinis kit on it as well

[@customsofozgarage3522]

Thanks for the feedback! I’ve got a couple other projects in the shop at the moment. I’m hoping to get back to the fox in the fall.

[@Lethal_Venom]

@@customsofozgarage3522 Mines going to be a king project as well

[@TheModAddict]

Looks good

[@o.mtopprint8687]

It's looking great Man 🙏🏼🔥🔥

[@customsofozgarage3522]

Thank you! ✌️

[@NewEdgeDesigns]

This is going to look great all painted up!! What a difference already!! Is the kit fiberglass??

[@customsofozgarage3522]

It is urethane, similar to the stock bumpers and side skirts.

[@Quik5oh]

Awesome work and great video! Love the front fender mod. Any updates?

[@customsofozgarage3522]

Thank you! That project is on hold right now. I got slammed last year with a lot of customer projects and haven’t had time to work on it.

[@ValentinoMustangs]

I’m doing a two tone cobra clone with my 89 gt but am using the dynaflex bumpers and side skirts. I’m going to pass on the cobra wing and just stay with the gt.

[@customsofozgarage3522]

I think it’ll look great with the GT wing as well! Good luck on your build.

[@lightsout1289]

I’m the 200th subscriber lol

[@customsofozgarage3522]

Thank you!

[@awee5816]

Would you happen to know if you can put an LX rear & Front bumper on a GT will it fit?

[@hustonhall2271]

Will that 2 sided tape hold up over time?

[@customsofozgarage3522]

I hope it will. I haven’t heard any negative feedback about it from other people.

[@davida6383]

Didn’t show welding. Are you gonna mig or flux core it?

[@customsofozgarage3522]

I always do mig with shielding gas. I’m not a fan of flux core on sheet metal.

[@danalee32]

How did the bottom of the rear cobra bumper get secured from flapping?

[@customsofozgarage3522]

@@danalee32 There are two small aluminum brackets that come with the kit. Sorry, I don’t think I showed that in the video.

[@eddiefernandez990]

i’m here for Bronco

[@customsofozgarage3522]

I’ll be sure to add some more Bronco content soon!🤣

[@e-racer4673]

I have yet to understand why you had to cut the front fender I do know 91 through 93. The fender opening is larger because of the 16 inch wheels. I actually have a 91 and my son crashed it and I got a 91 fender, and it would not fit Well the fender fit the plastic piece that went on the front of the fender was for an 88 to 90. Apparently somebody had changed the front fenders on the car prior to me getting it.

[@customsofozgarage3522]

So my car is an 89 which has the smaller wheel opening on the front fenders. The kit I ordered is for a 91-93 which has the larger wheel opening. To make the kit fit right I needed to trim the 89 fenders to make the wheel opening larger. Hopefully that makes more sense now.

[@TheModAddict]

I'm in the opposite boat.. I have a 90 LX that someone put a 91-93 front on.

[@MEMPHISBOI_901]

Will that kit fit on a 90 hatchback

[@customsofozgarage3522]

Yes

[@finewhine1599]

Kinda dented it up drilling those holes

[@Thumb_Coast_Aerial_fpv]

Even tho your just fitting it , I was cringing because you were going over the dirt.

[@customsofozgarage3522]

Thank you for the comment! The entire car is getting repainted black so I’m not too worried about the paint at this moment.