1995 Yamaha Virago XV535 Stator Replacement

[@PapySOonik]

Hello Guy ! I'm doing my stator, I'm wondering which is the second cable with the red and blue connectors that you have in your hand at 12:41 because I didn't change them.. is it important to change that too? If so what is the name of this part ? ( Sorry, i'm french but translatedby google traduction lol )

[@ELDESTBuilds]

That part is the regulator / rectifier. It coverts the A/C power from the stator to D/C power for the bike and limits to 14 volts +/-

[@PapySOonik]

@@ELDESTBuilds Ok very good, me the voltage regulator is behind at the level of the rear wheel. What are the symptoms when the part fails?

[@ELDESTBuilds]

No more electricity to the bike, just battery power.

[@PapySOonik]

@@ELDESTBuilds do you know where i can order just the ignition sensor?

[@ELDESTBuilds]

@@PapySOonik www.cmsnl.com/

[@emilmalmstrom234]

Hey guys from sweden. Did you use 9 foot pounds or 9 newton meters to tourqe them down?

[@ELDESTBuilds]

Foot pounds 6mm bolts 8-10 8mm bolts 14-16

[@qwertyui90qwertyui90]

How do I check if a stator is good ?

[@ELDESTBuilds]

Pull the hot lead from the battery while it's running. If it stays running, you're good. Also you can pull the rectifier plug and check the stator leads with a volt meter, check it with the A/C setting. Rectifier converts it to D/C.

[@Benlaify]

@@ELDESTBuilds hot lead ? You mean positive wire from battery?

[@ELDESTBuilds]

Correct

[@Benlaify]

@@ELDESTBuilds it shutdown immidiately after disconnect positive wire from battery, does it mean stator is not good ?

[@Benlaify]

@@ELDESTBuilds but does it not DC system in Virago? It works from battery or stator ?

[@GamesofthePast2000]

Thank you

[@ELDESTBuilds]

Welcome

[@GamesofthePast2000]

@@ELDESTBuilds wish i could figure this out. just got 93 535. Ran great for a week. Stopped to get gas turned it back on and completely dead. So i figured the battery was shit. New battery has the light come on, but now I cant get any spark. Any chance you have any ideas? "replaced the igni coils. no spark. now I'm trying the stator and pulsar. Man am I frustrated .

[@ELDESTBuilds]

Electrical gremlins, bike should start and run on battery power alone. Been there before myself, try changing the spark plugs and see what happens.

[@coopidon]

Using an impact directly on m6 screws which go into aluminium. My back hurts just when I look at it.

[@ELDESTBuilds]

It's on the lightest settings, doesn't reach the minimum torque specs

[@terranovarider1274]

U can recoil the stator yourself

[@ELDESTBuilds]

Yes, I have not done that