1996 Impala SS gets QA1 Rear Suspensionand Wilwood Brakes

[@T.-14]

Man keep doing your thing, your videos are 20 mins to a hour you keep making them it’s your channel. You do great work on these impalas and keep all of us motivated to ours. Great job keep up the great work.

[@zephorumcoffin2801]

When it comes to upgrading, this is probably the most important and influential video needed if you own a a 90s impala or caprice. This is Free Game...

[@grindschool]

Man that bracket would have been so helpful when I did my rear QA1's. You're right the bolt at the top of the shock is a nightmare and cost me a day of work just trying to figure out how to get them all squared away.

[@otgmechanic]

Game changer! Ill record tomorrow the part you need help with.

[@peterjennings6233]

As I watched your video and you showed us that bolt for the rear shocks, I hit pause and ordered. Thanx

[@OnionmanBrown-bs6pl]

THANKS FOR THE ADVICE ON THE QA1'S AND BRAKE SYSTEM.

[@sedrickbyrd5732]

Thanks for the information...Great job!!! Got my rear coiler and my U-bolts...I'm good to go now.

[@osbaldochavez]

Great tip on ubolt Kit. I just bought a set to get ready for the QA1 level 1 kit. Thank you for providing the link.

[@trulyblessedziiz1030]

Great video OTG....very fresh with the QA1 suspension setup

[@ss_smooth]

I'm always watching and learning

[@thomasliljenstam9048]

Can you still do this, parts list seem to have past "best before date", thanks for the video though.

[@otgmechanic]

Getting ready to do the exact same job this week

[@casheighty8]

Ford 9” changed my life on my box. I believe it should be the first thing people should upgrade on the rear of any 77-96’

[@djjc4007]

What’s the reason behind the Ford 9” upgrade?

[@djjc4007]

The main difference between the QA1 Handing Kit & Big Wheel Kit is the lower trailing arms are non adjustable in the "Handling Kit". Would the Handling kit fit 26" rims or better to go with the "Big Wheel Kit" and adjustable lower trailing arms? Thanks for the great videos!

[@quincystrickland4336]

I dont even work on cars but u make me wanting to try..i kno a lil in order to tell if its done right 😂😂😂

[@duanejimerson5021]

I need the link to the rear caliper brackets for wilwood brakes

[@GearJammerGarage]

Great Video Ray, Your content is top tier 👌

[@otgmechanic]

I appreciate it

[@DjCBlaq]

Homie is churning out the videos! 💪🏾💪🏾💪🏾 Gems

[@keymakxr]

You have a different part number for the Wilwood calipers for D154. Will that link for those D-154 work as well as the ones in this video ❓

[@ltcsimpson2272]

Thx for the vids… will a QA1 rear sway bar bolt up to a tubular lower control arm from UMI performance?

[@otgmechanic]

Thats a great question. I believe so. It should come with adapters IIRC.

[@paultorres9295]

Thanks for video I learn more about impalas 96 on suspension

[@96southernboy14]

2 in 1 day with a ton of great content 👌🏿

[@colinwahl2509]

I wish I knew about those ubolts before I did the rear shocks on my Fleetwood brougham

[@otgmechanic]

Game changer!

[@joeymissouri2690]

What are things I can do to get a smoother ride out of my 96 impala on 24s without going overboard

[@j.markdebuque-eubankssr.4343]

where do you buy those u-bolts for the upper shock/coilover mount?

[@Bubblelyfeblk]

Hope the group post get you past 5k💪🏿💪🏿💪🏿

[@kevinhawxhurst]

loved the video bro i watched it a few times lol where are you located at thinking about having my 95 ss towed to you..

[@ArtieGardnerjr-yk3ii]

How much for a full suspension n brake job qa1 n Wildwood brakes on a 96 ss Impala

[@jadaf4i]

Big brother Ray another good video

[@jacobfriedland2873]

the rear caliper link you posted are for D154 was that a mistake? i ordered rear d52 dual piston and front dual piston d52 hoping that is correct.

[@kendrickkeener7943]

Where are you located and how to get in touch to get some work did?

[@ZX7mcm]

Funny that nobody I’ve found has filmed the actual removal of the rear shock. It’s always “well it’s out now”…. Getting ready to do that on mine tomorrow. Need help!

[@otgmechanic]

Yea its hard to hold the camera and do it. Ill try to make a video showing the process.

[@ZX7mcm]

I got it. It definitely needs two people and not that hard. We didn’t have a lift either. Definitely could not film it….

[@dsacksphat]

Someone tell me which to get for 26s..

[@jettywetty1830]

Like the chanel bro i ever did ls swap on impala.ss n were ir shop what state

[@armaniantrax5471]

Coils part number is qa1 didn't say

[@dresanti5274]

Are those part numbers correct because the link brings me to double adjustable with a 300lbs spring rate

[@TheRealReasons]

So do you still drill the hole up top that qa1 says to drill with the u brackets?

[@otgmechanic]

I normally dont.

[@beenfressh2550]

I needed this video about 2 years ago. This was nightmare for me. But i got it done. Can I contact you on social media ?

[@superlate97]

Aren't 5208s for 73-77?

[@fosterburgess7068]

Where are u located

[@dannyhollins9569]

Can I just change the lower control arms to the rear or I also need to change the upper for the rear?

[@otgmechanic]

Need to change both if they are extended. Pinion angle will be off if you dont

[@whumph]

Droppin knowledge! ✊🏿appreciate it

[@GUNSHINESTATE45]

I got a 96 Impala. How do I contact you?

[@markiethwebb43]

I appreciate you for da tutorial

[@Capriceclassicbigbubble1992]

Will this setup fit on my 1992 Caprice classic

[@otgmechanic]

Yes

[@jlee1310]

Yo the wilwood d154 caliper bracket the link shows he is out what’s a plan b option to getting them

[@otgmechanic]

Dont know of another option.

[@jlee1310]

@@otgmechanic u have any on hand you can ship out I can order from you if possible

[@Misharyo]

1:58 sorry you couldn’t make it but you’re very close 4k

[@otgmechanic]

Yea I made 4k now. Goal for next year is 10k

[@everardovillarreal4019]

Does it matter if it’s 1 piston or 2 piston? They are both the d154 caliper series

[@otgmechanic]

Ive always did the single piston

[@everardovillarreal4019]

Ok thanks

[@OBSeSSedTeeV84]

Does the 94-96 Impala SS wheels fit those Wilwood Calipers?

[@otgmechanic]

Yes will clear stock wheels

[@OBSeSSedTeeV84]

Thanks, for the quick response.

[@Macaframa253]

Just subscribe thanks for the knowledge much appreciated ✊🏽💪🏽🙏🏽

[@carlosm.delgado4319]

🔥🔥🔥🔥

[@dresanti5274]

What spring rate is he running?

[@otgmechanic]

250lb

[@thekingdavid74]

🔥

[@ciuciulala8888]

Wonderfull video, informative, and I don't even own a car.

[@javonsedwards]

I wish you were in ny lol

[@otgmechanic]

An I had to pick up a car in long island once and maaan hell nah I could never live there 😂😂. But ship it down if needed.

[@javonsedwards]

One day

[@liljiggaboy69]

If I could quit my job, this is what Id want to do :)

[@franciscomaldonado3327]

Hmmm Wats this video supposed to be about ?

[@jasonheard4610]

🔥🔥🔥🔥💪🏽

[@liljiggaboy69]

If those LCA (Extended for sale, LMK)

[@otgmechanic]

The umi?

[@liljiggaboy69]

@@otgmechanic yep

[@otgmechanic]

@@liljiggaboy69 yea. Hit me on ig

[@MalachiHamlet]

Showing deez boys the light!

[@VincentHaynes-y9m]

Less talk and more on hands work, want to see how you do it ... Thank U........

[@4sondaprice]

Do I have to get uppers too or can I just install extended lower trailing arms to center my rear wheel?

[@otgmechanic]

Suggest you get uppers for pinion angle

[@920_newjuan3]

Do you have an email or some contact info? I have some questions if you could help me out with my build I’d really appreciate it

[@HenryCooks-j2x]

Where you located