1997 Chevy S10 Part 3.

  Рет қаралды 392

Master Of None

Master Of None

Күн бұрын

Пікірлер: 2
@hotpuppy1
@hotpuppy1 Ай бұрын
Parts quality is terrible these days. Take it back apart and look at it. Compare with old parts. Make sure everything was seated all the way. Something HAS to be sticking out. There should be evidence. It is likely ruined now so a new set may have to be had. I wouldn't run something that has been rubbing. Wouldn't be the first time a person had to do something over. I had changed the timing belt on our Hyundai Accent. Took 90 minutes. Easy job. Didn't replace the timing belt tensioner or the water pump as it was fine before and wanted to save the $. Started it and the tensioner squealed. Drove it like that and without the covers to the parts store to get a new tensioner and do the job over again. Good the second time.
@masterofnoneMB
@masterofnoneMB Ай бұрын
@@hotpuppy1 Thanks for the view and advice! Greatly appreciated!! Agreed! Parts quality in 2024 is subpar at best. Sad state of affairs.
The Free S10 gets multiple repairs.
1:17:49
Master Of None
Рет қаралды 170
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН
УЛИЧНЫЕ МУЗЫКАНТЫ В СОЧИ 🤘🏻
0:33
РОК ЗАВОД
Рет қаралды 7 МЛН
БОЙКАЛАР| bayGUYS | 27 шығарылым
28:49
bayGUYS
Рет қаралды 1,1 МЛН
Exploring the LARGEST CLASSIC-CAR JUNKYARD with Freiburger, a D/F Extra
13:21
Cracked Engine Block Repair
24:58
I C Weld
Рет қаралды 152 М.
TWISTED: The dramatic history of twisted-pair Ethernet
28:30
The Serial Port
Рет қаралды 524 М.
Timing Chain Noise Resolved!
16:53
Master Of None
Рет қаралды 194
4,302 ORIGINAL MILEAGE Chevy S10 detail/restoration
34:17
A1 Auto
Рет қаралды 81 М.
How to Easily Build a STREET/STRIP Engine for Under $500 at Home
2:03:37
Uncle Bucks Garage
Рет қаралды 343 М.
S10 V8 LT1 Build for Less Than $2500
44:25
chud327
Рет қаралды 1 МЛН
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН