1997 F150 Dashboard LED Light Replacment

[@brandonevans4142]

Leds are polarity sensitive so before you reinstall your cluster all the way check & see if they're all lit up. if not just pull out the bulb & reinstall it the opposite way. also don't forget to slam a beer once you're done

[@ericbuckland3589]

tilt the wheel down, pull off bottom plastic around steering wheel, unscrew instrument bezel. no need to take the whole dash apart.. you lost me when you took off the stereo bezel

[@Roger-ob2ft]

Eric Buckland Are you foreeal lol

[@buttadog5073]

Same, I've done this twice 😂

[@chrisolson6518]

can you send a vid of that sounds so much easier

[@timan206]

@@chrisolson6518 The millennial detector went bat shit, the most powerful trigger is when a man can only use his hands to ,asturbate asks some else who can do something with his hands to do it for him. Surprised you have a license.

[@bobhaddock957]

LED BULBS ARE POLARITY SENSITIVE. IF THEY DONT WORK, PULL OUT, ROTATE 180 DEG. RE-INSERT. THEY ARE NOT MARKED POS. OR NEG.

[@makingtechsense126]

Awesome video! I bought a used 1998 Expedition and none of the cluster bulbs are working and I didn't want to try and figure out how to disassemble the dash on my own. Your video is very clear and concise and has great pointers. Thank you!

[@BlackMickey]

MakingTechSense You're welcome! and thanks for watching. Mine went out as well and I started taking apart the dash to figure it out.

[@jaeger3254]

Black Mickey hey um which bulb types did you use for the cluster ? For the speedometer ?

[@adamwayne154]

Xxthe_best_mwxX They are T5 and T10, check the exact number from my previous comment to another viewer.

[@b0n3z90]

Just bought an 1998 f150. All my dash lights are out. So im thinking its a fuse... because in my head no way that many bulbs all go out at once. Reading your comment your saying every bulb was bad when you got the used expedition? I know its been some years hope my comment reaches you

[@92expedition]

I have never been so excited about changing out the bulbs on my 97 expedition. Thank you for this video

[@BlackMickey]

You're welcome. Glad I could help!

[@DJRaptorXS]

To follow up on my question from earlier, the circuit board film has a greenish tint to it. That results in the green panel tint from standard factory/incandescent bulbs. Just wanted to post this in case anyone else has that same question. Thanks again for the teardown/how-to!

[@carlosjorodriguez]

Same happened to me. Replaced with blue LEDs and now I have bright green on my 03. Did you resolve the issue?

[@thef150isstylish9]

@@carlosjorodriguez i used blue led with 3chips and got a pretty teal that's no wear new the ugly green

[@kendrickking9297]

Watched the video 1 time ND took everything apart successfully. I felt like a genius after seeing wat I did😂😂😂 thanks for the video💯💯

[@yareliestrada2564]

Going to try this once I watch it 4 more times lol 😂

[@urIIez]

Yareli Estrada same, kinda scared to start and not want to finish it if it gets too complicated 😅

[@mrsauce9307]

urIIez: are you a girl?💀💀

[@1977stupidboy]

You’re a douche nozzle. Parents must be proud asshat

[@joelguevara8235]

Did you ever try it out Yareli????

[@TheDouglash]

Did you replace the smaller light bulbs (beige color sockets) and if so what is the part number for those?

[@thejudgemeister]

I had to remove my cluster on my 99 F150. I didn't have to remove everything that you removed on it. It actually didn't take me that long.

[@TrueFiendVP1]

You're right... If you go thru the headlamp cluster youre in there in about 3 minutes.... This dudes a bug lol

[@baddrivercam]

100% correct. He did a whole lot more than necessary to pull the cluster

[@CarlosPradaRUn]

Great looking. Does your truck have dimmer control? Do these lights dim down when you turn down dimming on the truck?

[@BlackMickey]

Yes my vehicle does have the dimmer control. Yes my lights do dim up and down.

[@superbeast103170]

did you just replace the bigger bulbs i believe you said you had 6 of them just replace the big ones right

[@garyr7027]

Looks good but there are other lights on the truck that are factory color... well at least there is on mine. The power window switches, cruise control switches, temperature control switches, ect ect. I've got to replace all five on my instrument cluster panel too, do they offer factory white colored Led's? I like Led's they last a long time and i only wanna do this job one time.

[@BlackMickey]

Gary Riefle I definitely understand wanting to do the job once. Yes they sell just about any color you want. Here is the white color ones: 10 Pcs Xenon White T10 5-SMD 5050 LED Light bulbs W5W 2825 158 192 168 194 Wedge. I have also replaced my air control dials as some were dead bulbs. Hope this helps :)

[@garyr7027]

Black Mickey Heay thanks for that info man, I will be checking those out. I do appreciate it your help.

[@BlackMickey]

Gary Riefle Ok glad to hear it. You're welcome and thank you for watching. Hope everything works out.

[@hugosalazar7617]

Were some of your gauges dimmer than the others?

[@thef150isstylish9]

Worked well on my 07 escape only thing is i do not have the bright blue light with factory green tint but bulbs worked well and gave me a teal color ...also changed my blinkers and those were bright...thank you for suggesting those bulbs

[@jimhailey3410]

Micey what size bulbs were there in your instrument gauge? what numbers so I can cross reference to the LED replacements?

[@eduardoorrego027]

Hello, with which light should I replace the indicator light bulb? heist? it's broken

[@martinmarin841]

Are u going to replace the fokitos or the heater core??

[@Markthealien]

Were the turn signals the smaller bulbs? Do you have a count of how many bulbs needed for the project? Thanks for the video!

[@dalejustice9207]

How amny bulbs does it take to re place them all? The T5 leds are grow lights aren't they? Thanks for the video n God Bless!!

[@charleshailey1366]

LEDs mode that I have done have the potential to be lit in only one direction so be careful of this.. it is not just a plug and play. So if some of the bulbs do not lite up. Dont worry to much. Just reverse them. Take them out and turn them 180 degrees and the lite should now work

[@PreciousBoxer]

Thank you for the video! I'm glad I could hear you talk over that annoying background music.

[@Grannyhauenstein]

Black Mickey, you made this video almost two years ago, so I was wondering if the LED's are all still working? After having them for a couple of years now, are you still satisfied with the way they look in your dash?

[@BlackMickey]

Yes all the LEDs are still working. Some were flashing on and off occasionally, but that's because I'm an idiot and did not screw them in all the way. Yes I am still satisfied with the look.

[@Grannyhauenstein]

Cool. Thank you.

[@ronrandall7118]

I have a 2000 Ford F-150. I am replacing the instrument cluster lights with blue T-5 LED bulbs. The T-5 LED bulbs are polarity. When I install a LED bulb in the high beam indicator, I only get the LED to light up when I pull back on the left side turn-signal stalk or lever. When I push the stalk forward toward the dash so that the high beams are on all of the time and also for the high beam indicator light bulb to stay on all the time, I get no LED light at all. When I reverse the LED bulb polarity, I get no high beam indicator light at all in either direction. Does your T-5 LED bulb for your high beam indicator light up in both directions, forward for full time high beam or reverse (towards you) just to flash oncoming cars to warn them of a cop up ahead or whatever? I'm thinking I may have to use an LED bulb that is non-polarity, works in both directions like the factory original bulbs. But I do not see for sell on Amazon or EBay to where you can buy only one LED T-5 bulb that is non-polarity. Let me know on your truck if your high beam indicator light works in both directions (forward and aft or reverse). Thank You!!

[@raulskii214]

Alright so i have a question. I saw that you only replaced the larger bulbs with the black caps which are the 194 led bulbs correct? if i wanted to replace all the other bulbs what size are they? and those are the ones that control blinkers, door ajar, fuel, check engine lights, etc. correct?

[@BlackMickey]

The larger ones are T10s (194s like you said). The smaller (tan) ones are T5s. Yes the T5s are for everything else.

[@josepatino7433]

hey i replace my T194 but looks like i have to replace the small ones... what size are the smallers ones t5?

[@captainmarvel9610]

Yes t 5

[@Justin-cn4ey]

I have bulbs that light up when putting them in but the light doesn't come through to light anything up any known cause for this??

[@ivanontiveros2230]

Don't forget about the green tint the gauges have you need to clean that off in order for the color bulbs to shine thru all the numbers

[@myotheremail6399]

Now you tell me. Just changed my 2000 F150 to blue LEDs. I guess I'll be breaking down the dash again to take out that tint. Also, all six of my Illumination bulbs were T10's and not 194s. I didn't have to remove the radio bezel and I just took out the gear selector since my cable was too much trouble to worry with. I had to repair the speedometer, it was going in and out so I decided to change the lights to LEDs. Wasn't bad at all.

[@ivanontiveros2230]

@@myotheremail6399 i changed the bulbs on my f150 as well and it makes the green tint brighter so I'm gonna have to go back and clean that out

[@lanzycribbs8214]

Ivan Ontiveros having the same problem. How did you get the green tint off?

[@ivanontiveros2230]

@@lanzycribbs8214 i haven't cleaned that out yet since I'll have to remove the needles and peel the gauges overlay in order to clean them properly. You can also find other videos on how to do it. You can do the same for the light's on the heater assembly and it's easier to remove the green tint sheet.

[@lanzycribbs8214]

Ivan Ontiveros well what should I use to get the color off? Alcohol?

[@ChrisWilliams5605LS]

Thank you for the video I also have a 1997 F-150. It is the V6. I am still unclear how many lights I need to purchase to swap out the lights behind the instrument panel. You mentioned that you purchased some small bulbs and some large bulbs but how many of each variety? I am presuming five large ones for the black housings. How many small bulbs. Folks mentioned that you missed a light for your fuel indicator. Was that an additional bulb you failed to order or was it simply in backward? Thanks.

[@tjl9585]

My 1997 F-150 super cab (V8) has 5 large bulbs and 19 tan colored small ones. There are a few of other colors which I did not replace.

[@DJRaptorXS]

Do you happen to know the size/specs of the smaller (not 194) bulbs? After replacing all 4 194s, I still have a dark spot around the 50, 60, 70mph area.

[@DJRaptorXS]

They're 37. I found it printed on the side of the burned out bulbs.

[@veefewell374]

What size bulb are the small bulbs are they T194 also

[@caylonellis6]

Ahhhh....this ahhhh....that...ahhhh.....there..aahhhhh...ahhhh.....ahhhh lol 😂

[@jasmincordova8496]

Do I have to unplug the negative side of my trucks battery before dismantling into the cluster? People say you need to so you don't get electrocuted or something. Did you do that or did you simply turn the truck off?

[@tjl9585]

No. Simply turn truck off.

[@tjl9585]

I removed many fewer screws than suggested. I did not remove what was referred to as "that plastic thing." A total of 7 screws for the piece above the display and 4 screws for the display. WARNING: My 1997 F-150 headlight switch panel should not be pulled out all at once. First remove the cover. Then there is a black slide to remove the box that contains the connections. I replaced all 5 194 bulbs (2 were burned out) and 19 of the smaller T5 bulbs, all of which appeared good. My original bulbs lasted 27 years. If the replacements last that long they will outlive me.

[@superjoint57]

Large bulbs are T10 194's. Small bulbs are T5....and what number? Thanks!

[@BlackMickey]

Here is the numbers you needed. 1)10x T5 3-SMD Blue Instrument Panel Cluster Dash LED Bulb Light Lamp 74 70 37 17 2) 10PCS Blue T10 5050 5SMD LED Car Light Wedge Lamp Bulbs Super Bright DC12V

[@SkyHawk2729]

Black Mickey Did you replace only the 5 black with T5's in this video? Or did you replace all 5 blacks with all the smaller as well?

[@veefewell374]

D.P.T. you are a life saver bud thanks

[@SkyHawk2729]

@@BlackMickey I replaced the 5 big bulbs and on the speedometer 50-70 is not working. Why? Do I need to replace any small ones?

[@BlackMickey]

@@SkyHawk2729 Thanks for watching! If the other areas still do not light up, you may have to change out the small ones as well. I changed out all of mine.

[@marcuswhite1403]

I replaced all the bulbs in a 1997 F150, but now none of the gauges are working. Does the cluster have to be reset somehow?

[@artbush3313]

Thanks for video! I have a '98 with 228K on it and decided it's time to change dash lights. It's running great and puts not a drop of oil on the floor, go figure. I will go with red, 20 years as a firefighter puts red in your system. Again thank you for the video. Hoseman

[@sinceregrant3765]

Im 15 just tryna learn the things for my 1997 ford f-150 short bed i got the lights i see vids i just wanna know a better way which this is the easiest appreciate it dawg💯

[@chadbeatydop]

Thanks for the vid! I will be replacing the bulbs in my 1998 F-150 using this how to for sure!

[@BlackMickey]

Thank you. Glad to help!

[@mendozamexicano]

i.am.chad.beaty | cinematographer.editor.photographer do you have an updated in your project, planing to do the same in my 98f150, did you run into any complications?

[@BlackMickey]

Some of the lights did not light up the first time. All I had to do is take out the bulb and flip it around and it worked.

[@robertquintero2415]

That might be why my lights don't work. I'll try that thanks

[@jaeger3254]

Hey how did the blue look in person ? Was it a nice blue or was it purplish like in the video ?

[@BlackMickey]

Xxthe_best_mwxX To me it's a nice blue (not too bright and not too dark). I chose blue since it matches my interior lights and radio display.

[@jaeger3254]

Black Mickey alright cool the leds are on their way I'm gonna try & install this with my dad this week oh and also I only ordered the 10 T5 leds, those only work for the speedometer right ?

[@BlackMickey]

Xxthe_best_mwxX Keep in mind it does take some time to install. I don't exactly remember the exact placement of the different lights but that sounds right. I took mine apart to see how many of each led I needed.

[@jaeger3254]

Black Mickey okay since I only ordered those type of leds are they only for the speedometer or can I use them for the other bulbs (ex like the fuel gauge)

[@jaeger3254]

Hey I think I have the wrong LED lights for the speedometer mine are much smaller and don't have the blue casing around it and the extra light pointing up. I put them on right now and they look green(I limited the sunlight around the windows and made it darker) should I wait till darker to see them ? But I ordered these- 10x T5 3-SMD Instrument Panel Cluster Dash Ultra Blue LED Bulb Light Lamp 74 70 37 17 from amazon

[@christopherhoolahan1204]

Did you have to take off that green tint behind the gauges within the cluster?

[@BlackMickey]

Chris Hoolahan No I did not

[@christopherhoolahan1204]

So all you did was put in the blue bulbs and you are good to go? And what if I only replace the black mobs in the back with blue LED and now the small tan ones what would happen?

[@BlackMickey]

Chris Hoolahan Yes I literally took out the halogen bulbs and put in the LEDs. They can be whatever color you would like.

[@christopherhoolahan1204]

What if I only change the T10 bulbs to LED and leave the T5 bulbs halogens. What would happen?

[@BlackMickey]

Chris Hoolahan I replaced all mine at the same time. I believe they all should still work fine no matter which you replace. They are just lights nothing more :)

[@rosalesfamilygaraddicts5761]

What size were there small LEDs buddy? I did that with my expedition but didn't know the size of the small leds

[@myotheremail6399]

@Ben A Could be from California. Just sayin' :)

[@SkyHawk2729]

I replaced the 5 big bulbs and on the speedometer 50-70 is not working. Why? Do I need to replace any small ones???

[@nicolegarcia2854]

How do you order small and the big ones?

[@rockytherock8705]

How long did it take you start to finish?

[@JesusOrtiz-ow7zu]

Do u know if its the same size LEDs for the 2008 f150

[@bonez6349]

Hey man that looks killer.! I'm gonna do mine... I have a 99 F150 4.6 5 Speed and will these same LED's work in mine as well.?

[@BlackMickey]

Bonez I search on eBay and Amazon and both say T5 and T10 LEDS, which is what I used. I would double check the websites to make sure. Hope this helps!

[@bonez6349]

Helps alot...! Thanks bro

[@tasmaniandevil7610]

The gift thay keeps giving Thanks alot

[@phillipbarr115]

The instrument cluster lights went out on my 2007 F 150 last night. Trouble shooting steps?

[@EliteFlight]

Phillip Barr Fuse

[@phillipbarr115]

@@EliteFlight Thank you

[@phillipbarr115]

"Lid" on fuze panel has fuze # and location of said numbers, but the names of said #'s in the owner's manual doesn't readily tell me which one I need to replace... what is the name of the fuze in the owners manual?

[@EliteFlight]

Phillip Barr I have no idea, I’m a 10th gen owner and I always guess, I’d google it and see if it shows up in an F150 forum

[@phillipbarr115]

Have alot of fuzes now guess I can replace them all...

[@charrolastra2011]

I want to do this to my 99 f150 but how do I remove that green tint they have now. I really want that nice blue glow like my stereo.

[@BlackMickey]

The green tint is caused by the very thin electronic board. I imagine that there are different tints, but I am not sure on that. With your LEDs that should change the tint since they are bright enough. I also bought blue since it matched my stereo color.

[@carlosjorodriguez]

Did you ever figure out how to remove the green tint?

[@charrolastra2011]

@@carlosjorodriguez no I did not I ended selling my truck.

[@skulledmonte84]

can you still dim them ? and i think i would have used different color for the warning lights

[@BlackMickey]

Yes you can dim them.

[@jaeger3254]

Black Mickey hey I wasn't sure if you would still be active on this video but since you have commented , what number or what type of LED lights were they ? And where did you buy them ? I'm looking to change them on my truck thanks

[@BlackMickey]

I bought both types on eBay. 1) 10PCS Blue T10 5050 5SMD LED Car Light Wedge Lamp Bulbs Super Bright DC12V 2)10x T5 3-SMD Blue Instrument Panel Cluster Dash LED Bulb Light Lamp 74 70 37 17

[@jaeger3254]

Black Mickey thank you I'm most likely going to do this

[@blackstallion6951]

Really helpful video, thank you sir.

[@pedrohernandez2132]

What are those lights called ? I want to order them on eBay help me out

[@ericespinoza4477]

So did u only change the t10 bulbs

[@BlackMickey]

I changed both the T10 and T5 bulbs.

[@volksrod6926]

any other color may look odd. the opaque film is tinted itself. so red may not be a real red color. green would be nice cause its already green.

[@BlackMickey]

I chose the blue LEDs since my radio has blue ones as well. Just wanted it to match.

[@bobhaddock957]

how did you get steering wheel cover off ?

[@BlackMickey]

Bob Haddock All I needed to do was pull up firmly on the cover and it popped off upward.

[@randallsaulsbury8298]

the panel over the steering wheel comes off how? Why do you not show this?

[@romanmorataya7492]

You literally just pop it off.

[@martinmarin841]

Where a can get thise lights

[@DJRaptorXS]

Nice video! If I do the replacement using standard white halogen lamps (size 194), will I still see the factory green tint? I actually want to keep the factory tint intact so everything is uniformly lit/colored. Thanks!

[@BlackMickey]

DJ RaptorXS I'm not too sure since I used leds and the green tint didn't show. I've used and tested both white and blue leds.

[@austinwhite6570]

Great Video, plan on doing mine this week!!

[@BlackMickey]

Austin White Thanks! Sounds like a good plan, glad I could help.

[@UlyssesXB]

Great video thank you. I’ll try it on my 2000. Btw, the music is too repetitive and annoying, sorry.

[@catfishredneck88]

Yep horrible music

[@michaelmcmahan6150]

what size bulbs were they?

[@BlackMickey]

Small ones are T5 and big ones are T10 I believe. Bought them in packs of 10 on eBay.

[@glngglng3967]

yo tengo una 1997 ford f250 que focos yeba en El tablero si mepuedes desir place

[@Roger-ob2ft]

Does this work on 97 expedition ?

[@MrSpanky473]

Yes same dash panel

[@sterlingpeterson7330]

Loved this idea, great look, and cheaper than buying new gauges.. awsome walk thru by the way followed step by step an had no issues at all, unfortunately for some odd reason when I installed mine seems like only a few of the new lights worked both w/ the big an small replacement LED bulbs.. I've got seedometer but not tackometer, have the fuel an volts meter but not the temp or oil pressure, and of course the left turn signal works but not the right, plus a few other small indicators... Any idea why this is happening???? Pls help!! Lol

[@mrlude490]

LED bulbs are polarity sensitive so if they didn’t turn on you have to remove them from the bulb holder and rotate 180 degrees then reinsert into bulb holder. That should do it.

[@doncorleone9442]

@@mrlude490 4 years later😂😂

[@ridertdm2687]

Nice vid man, definitely going to try this on my ‘03 f150 soon!

[@doncorleone9442]

1, 2, 3, 4, clap your hands 🤠

[@ellenorbjornsdottir1166]

'02 256 V6 2wd. I want to make my truck cool for when I sell it. Thanks for helping me possibly do that

[@jmrsmanuel2009]

I did changed it to blue lights but still green uhuh how that? Have to remove the paper of the green or what?

[@CountryBoy-rd9ef]

Juan Ruiz good question

[@carlosjorodriguez]

Did you figure out how to remove the green film?

[@jmangi6221]

Did this mod and nothing! Be careful because not all vehicles are upgradeable. I have a 2002 F150 and there is a green panel inside the cluster ( factory stock ), which prevents the led s from shining through, so we had to take everything apart again and return it to stock configuration.

[@lewis_not_louis2391]

Could you not remove the green screen

[@jmangi6221]

The screen is integrated into the motherboard,the only way to get blue light is to have a custom blue panel made,ouch!😉

[@vicentezavala4818]

la verdad hicieron una tranformacion increible en la camioneta ,, tal vez algun dia pudiera hacer lo mismo en mi camioneta . felicidades ala persona que hizo tan increible trabajo ..

[@sclark56DL]

Are you in CO?

[@ericcagle8780]

Great video bro! I am going with the blue! Nice upgrade

[@AwesomenessIskey]

Also need to be careful with what lights you use. All those cheap led ones from china you find on ebay will burn out pretty quick and leave a rust residue behind.

[@BlackMickey]

Yes, that is true. It has not happened yet, but there is that possibility. I will keep on the lookout.

[@captainmarvel9610]

Awesome. Thanks for the video brother

[@nels0nmike]

Would this work on 01 xl?

[@NoahWhaley]

mike nelson yes

[@moonchild424]

how did you get rid of the green glow/film so the blue would show through

[@alexpuls8219]

drew luna the early model f150's of that generation had a white light up instrument cluster. I know what you mean tho, I have a 2003 king ranch and my instrument cluster lights up red and green.

[@moonchild424]

Is there anyway to fix it or is it something im stuck with i have a 2000 excursion

[@ivanontiveros2230]

You can use rubbing alcohol to remove that green/white tint. I did that to the a/c control nobs and it looks great after I cleaned them off

[@pound4poundbeast]

great video. blue looks good, I think I'll be doing this soon

[@SanchoGracie]

Waiting for post cluster light replacement dash rattle in 3....2....

[@tinawarne2570]

I got a 97 f150 ex cab short bed.my fog lights wont work when i pull em. Ive checked the bulbs they seem to b ok anyone know y or have had same. Problems let me know

[@DGreywolf]

*Tina Warne *. LED’s are polarity set. I had the same problem with my 99 f150 and unfortunately, had to disassemble and turn the bulbs 180 to get them to work. This might be your fix as well.

[@robertquintero2415]

I just installed blue LED'S on my 98 f150 dashboard and they didn't light up. :( don't know what the problem is

[@BlackMickey]

ROBERT QUINTERO Have you tried turning them around? Sometimes the terminals are different.

[@TribalLady12]

This is an awesome video. Thank you for the details!

[@joeski8876]

Thanks, nice job.

[@BlackMickey]

You're welcome and thank you.

[@Shepard7]

Nice video, but you have 1 led not working at the fuel guage, you just need to turn it 180° degrees and put it back, then it should work.

[@BlackMickey]

Ah yes, thank you. I must have over looked that during the edit.

[@Shepard7]

You welcome bro.

[@mopedjankins221]

OK, I replaced mine and now on the left side of the mph gage isn't getting light to the numbers.

[@BlackMickey]

moped jankins Try flipping the contact points around. That seemed to work for me.

[@mopedjankins221]

Good point. Let me get to the cluster again. I put those Sylvania LEDs from auto zone (10 dollars per bulb) because there so bright. And I also had them in other projects

[@BlackMickey]

moped jankins Ok. I would make sure every light is working before you put everything back. Same thing happened with one of my turn signals and had to take apart the dash again.

[@mopedjankins221]

OK I found out that the bulb in question isn't working just right. It likes to be touchy with the contacts. So I swapped it out with a different led. Now it works but on the top of the gauge isn't fully lit around the 50-60.

[@mopedjankins221]

OK I figured everything out. :)

[@freecheese4143]

Looks awesome !

[@zmonty09]

the fucking music dude seriously

[@broken1965]

Bro how did they preform no flashing or such after 1 year

[@slowpoke96Z28]

“Run” is the position before start, and those are incandescent bulbs, not halogens!!!

[@riphaven]

looks good, but you should of went with red, blues fucks up your night vision

[@BlackMickey]

Ah ok. Thank you for the information 👍, I'll use red in the future.

[@riphaven]

that's why you see all those war movies on board ships everything is red in the control rooms. your iris won't react to it so it stays open wide to let more light in at night. blue will make it contract and let in less light.

[@makingtechsense126]

Blue is also the most difficult color for your eye to focus on. Red is the easiest. Too bad because Blue looks so dang cool! ;-)

[@howarddrakeford]

That's why BMW has been using red for years!

[@howarddrakeford]

I guess. ..they used to use red too!lol

[@MissingLinkMTB]

Background is very distracting and gets annoying quickly

[@charleslewis1248]

You forgot to say what size the small bulbs are.

[@tjl9585]

T5

[@randolphsetting6685]

Videos pretty informative but the music is distracting shouldn't be any music

[@MustangGuy6501]

Wish my 03 f150 was so easy lol looks good man

[@hanksgavin]

Seems like you removed more then you need to. But thanks for the video. Also, when I took mine out I used Meguire's ultimate compound to polish the scratches. Two problems worth noting. The warning lights deteriorated quite a bit. Also LEDs aren't dimmable, so be warned.

[@Stienecker]

hanksgavin are you smoking crack ?

[@sinofwrath8355]

Havent seen an LED that isnt dimmable...

[@Stienecker]

Sin of Wrath people are dumb as hell

[@gregevans3168]

The background music is annoying.

[@Tina3858]

The music is very distracting

[@juddlentz1115]

Music is distracting

[@jamesm1490]

link don’t work

[@sclark56DL]

Nice a lot of work though

[@johnkrim8377]

Yeah , a lot of work . Just did mine on a 98 f 150 pickup ,no more just reaching behind the dash like back in the 50s or 60s pulling the bulb out and putting a new one in. Haynes truck manuel has good instructions if you can find one that old.

[@5kwattz]

Real fkn nice,, gonna try this on my 2000 5.4🤠🤠🤠🤠🤠🤠