1997 Lexus LX450 Replacing Front Brake Pads & Rotors (Same as Toyota Land Cruiser FJ80)

[@MistakenMedia]

"Takes a special size socket." Proceedes to not tell us the size 😂

[@systematictrendfollowing6096]

Haha, it’s 54mm

[@The_Osprey]

Excellent video. Thanks for the help.

[@DantheFixitMan]

No problem, Thank you for watching! Take care, -Dan the Fix it Man

[@matthewr.8029]

I noticed you didn't use a flange gasket at the 17:45 minute mark. Was that intentional?

[@tristantaylor808]

thanks man really helpful !

[@andresmolina3732]

What size is the big nut 54mm or 55mm and where fif you get the size

[@rainmagno4279]

awesome video!!! thank you!

[@DantheFixitMan]

Thanks Rain! Take care, -Dan the Fix it Man

[@trd75sf]

For you to be able to spin your wheel like that does it have to be in neutral and the other side lifted as well?

[@GrandmasMallCrawler]

oooh! this is really what i tried to do earlier today before it started raining. Good tip

[@jasonbariel]

the tire will spin freely when the flange is not installed as the flange is what connects it to the axle shaft.

[@xavierandradev]

19:00 If you don't have the special pliers, just put the clip and a big washer on top. Then put a bolt in the center hole and tighten it, that will open the clip and then you just need to push it into the groove.

[@tombaggs116]

My 97 Toyota Landcruiser Brakes doesn't look anything like this.