After the first ride, there was a list of problems with the R1, the biggest were a front brake judder and the engine holding onto revs. In this episode Dave tries to fix both issues. But it might not all be easy fixing
Пікірлер: 31
@steveball23073 жыл бұрын
Love your perseverance at a point when most of us would say - oh bugger it!
@bikerjock26544 ай бұрын
Some of us have motorbikes with character, while others (Dave H) sort theirs out - eventually.😊
@Matt-we7si3 жыл бұрын
no better feeling than setting up a set of carburettors and getting them running much much better than they were
@RichieWilliams3 жыл бұрын
you have the patients of a saint my good Sir.
@blackline663 жыл бұрын
Really good video with tons of info. Thanks Dave.
@obsession_engineering3 жыл бұрын
Glad you enjoyed it
@stephenmcqueen40293 жыл бұрын
Considerably. Oil stone. Check.
@jerryx20003 жыл бұрын
I read 1998. Then I saw the video qulaity and was wondering how they managed this type of picture quality in 1998!?
@obsession_engineering3 жыл бұрын
Bike year not vid year lol
@alexma9953 жыл бұрын
Work shop manual book is the solution😄
@stevesanelli903 жыл бұрын
Great work Dave! Did you sort out the brake shudder? Did the cheap discs make any difference? This setup reminds me of a 2007 Ducati MTS1100 front brake disc system. Shuddered occasionally but a change of pads reduced it considerably. I think it had more to do with the rim posts for the disc than the disc itself 🤔
@obsession_engineering3 жыл бұрын
Once the 'new' cheap discs were on it seemed to cure it, which I wasn't expecting but am happy it did it, lol
@andyemerson37183 жыл бұрын
I alway did pilot screws 1 and 3/4 turns out. Just a thought. 🏍
@cybergift563 жыл бұрын
When this build is done please do a full Review 🙏😁🔥😅👊 and drive it🙏😁🔥
@TheDillonma3 жыл бұрын
Hello Dave, I've noticed there is an aftermarket exhaust on the bike which is probably less restrictive than the original. Herefore you probably should set the mixture screws a 1/2 turn to 3/4 of a turn further OUT than the manual tells you to do.
@ryanharriss79503 жыл бұрын
Aye, but once you change pipe/air filter, they never run right. ...
@obsession_engineering3 жыл бұрын
I did adjust the pilot screws and on the bench it was much better, but didn't cure it on the road test, so more work to be done!
@PSKallesoe3 жыл бұрын
Great channel - Any reason you didn't do the brake cleaner check to see if you actually solved the false intake? - It seems like it could be a good "clean carbs video" since I would assume some of the jets are a bit clogged which would make it run lean. Luckily its a quite easy job. Just dont unplug the throttle cable from the carbs. That is, if you want to take them off.
@obsession_engineering3 жыл бұрын
They did get a check and clean very early on, and seemed to be in nice shape. I'll be revisiting them soon!
@ajl1243 жыл бұрын
Dave, just a thought, is there any restriction in the throttle cables preventing the butterflies closing quickly e.g - kinked or badly routed cable, stiff cable or throttle linkage? BTW Is this the right time for the wire locking video???
@obsession_engineering3 жыл бұрын
cables are good and return action is fine... but a good place to look
@ruaraidhmcdonald-walker95243 жыл бұрын
Idle mixture a bit lean? That would cause a hangup....
@motorcyclegarage23073 жыл бұрын
If you are having these days, I think I will feel less angry now and maybe less swaring will go on, when I have similar days.
@javierr1blue3 жыл бұрын
How do you adjusted the air screws because they are in a hard spot. So do you adjusted then turn on the bike or the bike was running at all times while you adjusted the screws. ? Thank you.
@obsession_engineering3 жыл бұрын
They are awkward but you can just get to them when they're on the bike. Short screw driver needed!
@Maxlalala19863 ай бұрын
Whats thats front paddock stand called?
@obsession_engineering3 ай бұрын
That'll be a Harris stand
@Maxlalala19863 ай бұрын
@@obsession_engineering do you know if theyre bike specific or do the later gen R1 harris stand fit? Tia
@melanienorth41033 жыл бұрын
When you riding the SP1 Dave?
@obsession_engineering3 жыл бұрын
Soon I hope, just waiting for 2 dry days in a row, lol