Ford F-150 5.4L SOHC Head Gasket Complete Replacement (Full Length Director's Cut)

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@loganreviewsit]

THIS is how a repair video should be filmed. Excellent information, perfect pace. I have to do this same job, but my truck is vastly more complicated due to the addition of an Edelbrock supercharger. Sigh. There goes my vacation!

[@1AAuto]

+Logan Reviews it All Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@gameshero6070]

I have been working as a mechanic for 10 years, usually I work on Japanese cars, but in this video I got a very great experience about American cars, now I think it's very easy for me, I want more videos, thanks

[@roysaenz5738]

I will be starting this same job on a 2003 Expo 5.4 for a right head that is leaking coolant but I will pulling both heads off for a complete check and repair. I'm trying to get myself in the mood to getting started. LOL....... great job on your video.

[@tacoswamper]

Love this. Great guide. I can tell a lot of work went in to this one

[@tyturnswrenches]

Love the video doing this job soon on my daily driver this video definitely helps a lot. You should start your own channel for your 10th gen build.

[@PlayinNgaming]

6 minutes in and im def callin the shop 🤣

[@elvisfrancis438]

Beautiful video really informative from a good technician

[@lancehammond5659]

Thank you for your time and obviously the care you took to do this vid. I'm going to tackle this monster some time in the next few weeks. Been down for a few months. Thanks again for the effort you put into this ........

[@losbanosmonkey]

I need to buy me one those Torque Wrenches :)

[@chitown7621]

I got a seal leak at the head gasket I see my 03 gonna be in the shop for a few

[@mplscarsales6652]

Great video we need more videos of breaking things down exactly like this harder jobs keep them coming

[@sottilavong]

Excellent! Thank you!!!

[@ektorrrios8249]

Is there a video on a 2010 5.4 24v engine?

[@FreeKanal]

educative, thanks

[@RayMorales-b1s]

Do u have to drain the oil ??

[@Paul-fq4mm]

I mean would be a good way to learn but totally ridiculous horribly design

[@carlosgarza7785]

Love this vid! Shit ton of jibberish but still great amount of nonsense.

[@MrGoldman9]

I wish you would have shown us the installation of the camshaft and the rockers before installing the heads on the engine and how to valve lab>> thank you

[@galesams4205]

IF you like standing on your head and turning wrenches doing head gaskets on 5.4 3 valve jump to it. Much easier to just PULL out . These viedeos don't tell the whole story.

[@ahotdj07]

With replacing the head gasket...I would replace any parts that was taken off that could be replaced. Especially if it was never done or needs to be done. E.g., water belt, fan belt, thermostat, pulleys, tensioners, etc.

[@dragonrider9051]

I wish i had that motor in my 95 5.0 Flareside

[@jamesanderson4014]

Sneaky torque sneaky torque. Worse than transmission bolts. Great job. If I had a little more extra money I would change injectors same brand as OEM. AS a DIY person don't want to go in there again. One big bill and never again. Appreciate all your tips. That's a job and a half.

[@NiftyNiklz]

Just a tip: If you send these heads to a shop to get clean, make sure the freeze plugs are still in. I just found out what a freeze plug is. This is not how I wanted to find out what a freeze plug is.

[@AlexB-hp3dj]

I removed the heads a couple weeks ago. Getting ready to put in the new ones. Notice rust in cylinder walls from sitting Any suggestions on how to clean that up before installing the new heads

[@bobbym4811]

Did you forget to put the idler pulley on the driver side or something? Because that belt diagram n stuff doesn’t look right??

[@pjj12345789]

No liquid thread seal on the bolts going past water journals smh trash mechanic

[@HighlanderJosh]

Epic video here man! Well done on your work! I know you must've sworn on that thing for a couple of days while working on it, but you succeeded! I noticed some bubbling in my heater core, it has been doing it for awhile now, but the radiator fluid lvl doesn't seem to have changed, so I'm guessing it's just air pockets that need to be released. If my gasket is bad, then I will for sure keep this video in mind if I take on this challenge of a job!

[@Whatsgoingonherebud]

Will this be the same for a 2010 f150 with the 5.4 3v?

[@aldonco]

What a nightmare. Great job

[@ericcarreno]

Timing 10:05

[@Fastford011]

I took my 2002 Ford F150 5.4 L V8 to the shop with a blown plug in cylinder seven for the second time. They didn’t feel comfortable changing it so they said they would change the Motor. I told him that was ridiculous. I just wanted the head replaced what’s wrong with mechanics these days! It’s hard to find a good mechanic these days!!

[@osbaldoa.castro488]

Thanks for the video. I have a 2000 F-150 5.4L 3 valve triton. And I spun a bearing and need the crankshaft. From what year to what year can I buy one that it’s exactly the same? And is the 4.6L be the same crankshaft? Thank you in advance. 🚙👍🏽

[@rexhepbajraliuchannel7104]

Hi I'm working on f150 head how to know the torque they suppose to be ?

[@gameboychris15]

I got the timing bolts out of the timing cover in the front of the engine do you have to drain the oil before you loosen the bottom ones that bolt to the cover

[@jonasbanes7174]

Looks like yall have been watching the car care nut recently, he did a similar length video!

[@johngoogle7626]

How many hours did it take you to complete this job??

[@Barnekkid]

Good video. Watching this makes me so not want to own a ford.

[@troyhall2317]

What a treat to watch a real pro thx!

[@garrettcr8832]

Absolutely love it would appreciate more videos like It

[@k9under]

Good to know have a 2007 f-150 5.4 liter.

[@aldrinuraga]

nice video What is the price of a job like that?

[@antons2975]

All that work for a fkn head gasket

[@RayMorales-b1s]

How do u put the pulleys back

[@IMABEAST191]

Torque wrench sketchy

[@pjj12345789]

Wire brush never fails

[@endofz33world]

Never underestimate my abilities to put a torque wrench anywhere. I got the throttle body @ 7.4lbs.

[@1AAuto]

+Endofz33world Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@KP-li9wr]

Where did you get kit?

[@FlyInkMack]

Can you do one on a 2012 ford transit connect xl 4cyl

[@1AAuto]

+Fly Ink Mack We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@achtunpanzerkrauskrieg]

Awesome job man... !!

[@johngoogle7626]

Great commentary!!🎉

[@thesillyquestions]

So awesome ty

[@dcbqb19]

April fools! You bought a Triton! 😂

[@Kane-ib5sn]

when humanity moves toward electric vehicles. this complicated stuff will be a bad dream. it's a problem to do with planetary drought, high levels of CO2, deforestation, lower oxygen levels. and an unwilling public to embrace the necessary change. and btw, that's going to have to be sodium ion, not lithium ion batteries. people need to listen.

[@samanthacoutoure1653]

I like your how to videos. Always complete and the availability of the needed parts never hurts. I will be replacing the heads within the next 2 weeks. Thank you!