How To Install Replace Window Motor GMC Sierra 99-06 1AAuto.com

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@brandonmikec2239]

Thanks you helped me to fix my window and we needed it bad, we cut grass in the heat all day thanks !!!

[@streetracer70]

I just changed my wifes 99 gmc seirra passenger door regulator and motor, with your video help it took longer to take off the door panel then to change out the whole motor and assembly. Your videos Rock, please keep up the good work, you honestly don't know how much these videos help. Thankyou so much

[@nicklehmkuhl]

My dealership wanted $400 to do this job! I bought the part for $100, brought the laptop right out to the truck with me and went through it step by step. I never would have attempted this without the video. The window works perfectly and you can't tell the door panel was removed. AWESOME!!! thank you.

[@johnmaccallum6837]

Thank you for saving us from the high cost of repairs from dealers and such, guys like you are heroes.

[@Saiga76239]

I found this video to be 100% informative and accurate. Being someone who doesn’t know a lot about vehicle repairs, I was able to use this video with the part I purchased at a local auto parts store and do the installation with the help of my brother in less than an hour. Window now works great. Thank you so much for posting this video

[@1AAuto]

+John Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@jamieacd2]

Just wanted to say thank you very much for your videos. They are a lot of help to me and save money. The labor costs as you know are sometimes outrageous. I have been able to do a lot of my own repairs that normally I wouldn't even attempt. Thanks again and all of us out here really appreciate helpful people like you. Keep up the good work. (Ten thumbs up !!!)

[@1AAuto]

Thank you for watching! 888-844-3393

[@Glock19Girl]

THANK YOU 1aauto for ALL your wonderful videos! I'm not sure if it was just my laptop but the sound in your video started out loud & clear but ended up so low that we couldn't hear what he was saying. So we just watched what he was doing and didn't hear the part about holding on to the wheel! LOL... That said, we ended up watching your "What NOT to do when replacing a power window motor" and my daughter & I got it done! THANK YOU again, as you helped 2 females save a lot of time & money!! =)

[@Explorer5557]

This how to video was excellant, found it very helpful( Note; I have a 1999 GMC SIERRA and there is some minor diffences concerning fastener locations on the door panel) Anyway removal and installation of the power window motor and regulator took me 35 minutes. Such KZbin howto video's are better that the factory shop manuals published by GM that I have.

[@1AAuto]

@Spank529 Process will be similar, you will probably have to unbolt the regulator so you can move the window in to a position where you can get at the bolts that hold the reg to the window.

[@willieboy555]

Just changed out my rght side front motor and reg. and it took me way too long but your video was instrumental to my success. Thank you very much. Bill from Memphis.

[@logancarr3208]

I just changed my front right on a 2003 Sierra. Couldn't have done it without this video. Thanks so much!

[@Tobago12594]

Just replaced the regulator on our 200o Silverado and this video was a great help. Made it unintimidating. great job!

[@1AAuto]

We currently do not have an auto repair video that shows this particular repair.

[@1AAuto]

Normally there should be no squealing going on with the regulator after installing a new one. If it is, most likely one of the one of the rollers is not properly lubricated or the wire is catching causing it to bind up and make a noise. You could try spraying the wheels with lithium grease and see if that solves your issue.

[@SCOTMIN]

Well, you saved me $100, It took me less then an hour to change the regulator. Thanks soooo much. The door panel was the hardest part. I used to work on my cars all the time and have been paying people to do most repairs lately. Your video was a very good learning method.... THANKS FOR POSTING!!!!!

[@joannhamm3301]

Thank you very much for posting this video about how not to do it as well as the one about how to do it... although I took both approaches (sigh) you saved me a lot of grief nonetheless. Hope you guys are getting lots of business as a result of this effort -- if I do need to buy something I'll come your way.

[@1AAuto]

It could be very dry weaterstrip. You could spray it with a little silicon spray.

[@glennbaird8671]

Fixed my window motor thanks to this video... Went just as depicted... THANK YOU!!!

[@1AAuto]

+Glenn Baird Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@1AAuto]

Usually there's a jute type rope that seals it on there. You could always tape it back into place too.

[@mikestrako1192]

Great video. Just replaced mine after watching yours. It was as simple as you made it look. Thank you.

[@1AAuto]

Thanks for watching. 1aauto.com

[@1AAuto]

Sometimes there is a safety clip to make sure it the connection does not come a part. The clip needs to be pulled out for the connection to be released. This sounds like the case on the window motor connection.

[@austinatkins3722]

This video saved me $400. Thanks, brother!

[@1AAuto]

+Austin Atkins Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@billsmith5673]

DIY people, the IDEA is to BUY PARTS from 1Aauto when you need them instead of amazon or ebay. 1Aauto guys spend time and money making these videos for us noobs so lets show some love and buy parts from them once in a while. Otherwise we'll be watching Earl outside his trailer with no light and a crappy camera! I always look for 1aAuto videos because they cover even the most mundane and have professional videos. Thanks 1aAuto

[@1AAuto]

+bill smith Thanks for checking us out Bill. Have a great day! 1aauto.com

[@carlcook687]

I just replaced my window motor and regulator on my 2001 Silverado. The video gives confidence in how to do it. The 1aauto parts are good quality and cheaper than local parts stores. I cannot recommend them enough.

[@jasearles]

Excellent post thank you for your help. I used you're advise to replace the regulator on my '03 sierra denali. everything was going well until i went to get the replacement part from my gmc dealer. Apparently the regulator has changed . Now the bottom two attachment points are studs that accept a 10 mm nut. The nut of course doesn't come with the replacement part so I had to return to the dealer to get the two nuts that were missing.

[@1AAuto]

The 85 is a scissor style where the 99 and up is a cable driven regulator.

[@curtisjames2443]

1aauto and Chrisfix have helped me fix everything on my trucks

[@1AAuto]

+23CurtJames Thanks for checking us out! 1AAuto.com

[@YoungDreezee]

Excellent video, but I found someone to do the job for $75. Rather pay a buddy than me struggle for 2 days trying to figure it out- with your video, im sure I could do it in 8 hours (I think), once I have all the tools. Your video is excellent in showing the skill it takes to do it. Thanks, I will subscribe

[@douglockenour7054]

Awesome video, made the job so easy just watching the video while I was doing the work and pausing it when I couldn't keep up. Only wish you spoke louder.

[@1AAuto]

You may need to take the door panel off and push the window up and into place be hand.

[@h3llsdemon437]

I didnt realize the window system used cable guides so I messed up and the whole cable wheel came out and undone now iv got a mess, I regret not watching you guys before hand

[@A1Zealot]

thanks man very informative...its great to have a resource like all the 1aauto tutorials and there easier to follow than a chilton or haynes manual

[@georgedwilkinson]

Thanks! The hard part is putting the door trim back on. Any tips for how to get the 5 hook thingies engaged and still have the power door lock bar in the right hole?

[@poohmanji]

This is awesome! Thank you so much for reminding everybody how useful youtube can be!

[@celticelectric]

Just want to echo everybody else's comments here. I diid the first window in 50min and the second one in 30min start to finish. Wouldn't have even looked at it without this video. Thanks for sharing this expertise, from one tradesman to another.

[@1AAuto]

@1985k20silverado You would still have to run all the wiring.

[@1AAuto]

@1985k20silverado You can install power windows in to a truck with manual windows. You would need to put in the motors and mechanisms and run the wiring. The basic idea is simple but wiring and all that is more complicated.

[@1AAuto]

@HunterLaw1981 Check your battery and battery cable connections. Make sure they are not corroded.

[@1AAuto]

It would be different because the S-10 is the smaller chassis and the Sierra is the full size truck.

[@bschilli94]

How is that water/dust cover kept on?

[@Varmint260]

Thanks so much for this video, got the job done this morning with minimal fuss! Only difference with my 2003 1500 SLT is there is no T2 torx screw and no plastic clip to remove before pulling the door panel off.

[@1AAuto]

+Varmint260 You're welcome!

[@ArielMendez1]

How do you reaffix the plastic moisture barrier? Mine seems to have lost some stickiness. Heat it up a. It? Other kind of adhesive?

[@najemokd]

I would like to see one of your videos that covers the replacement of the power window motor on a 2004 Chevy Colordado. Any plans for this? There seems to be a rash of these motors failing all of a sudden.

[@TheKevin459]

Thanks, this helped me on my 2002 Rendezvous, I was not sure how to attach window to brackets.

[@1AAuto]

You might be able to ravel it back up on the wheel.

[@YessahGaming]

Thanks for the awesome easy to follow videos. I’ve been using them for years and you’ve saved me thousands! 👍🏼

[@1AAuto]

+Garrett Rice Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowMotors?KZbin&CTA+Comment&AqNJpJM

[@lawnservice7]

Ok, you make it look easy. I will give it a try on my 2000 Chevy Silverado. Your replacement parts, are they as good or better than dealer parts? Do you have free shipping?

[@Spank529]

i have a 2000 pontiac sunfire....the window is 2 inches down from the top and is stuck it wont roll up or down (automatic) now my question is will the process of fixing the motor be some what similar to the impala video because i really dont have a lot of money and id rather learn to do it myself..from watchin the vids it doesnt look complicated but i wanna be 100%...please help when u have time

[@Flyboy160]

Is it required to remove the window regulator to replace the motor only?

[@1AAuto]

You're welcome. Have a great day!

[@32shanky]

Do you have a video for a 1995 Chevy 1500 regulator/motor replacement?

[@jimpeoples1]

How long should it take to replace the window on the passenger side front of a 1994 Astro van? Thanks

[@ABBA1966]

Thanx, I just did my 01 Gmc Yukon in about an hour. It me a little longer cuz I was checking other things out while I had it apart.

[@1AAuto]

+ABBA1966 Thanks for checking us out!

[@googleuser1748]

Would this be the same process on my 2007 Silverado 1500 classic body on the left rear?

[@GreyelephantGaming]

Super helpful. Thanks to this it only took me 45 minutes on my first try. Thank you!

[@1AAuto]

@digitalmixer Yes basically the same, might be a couple differences when removing the door panel but again basically the same.

[@1AAuto]

@jimpeoples1 It might take about an hour or so.

[@1AAuto]

@Explorer5557 Thank you for watching our video.

[@rellionclark5649]

Thank you so much after panel was off took about 10 mikes and that was with seeing why the old one failed and putting a new motor onto it .

[@HunterLaw1981]

I tried replacing the motor, and it seemed to work better, but then the other window got slower. After a little bit more, they are both slow, with one being slower than before. Sometime they won't go up all the way, until I turn the car on or hit the button again. Any ideas? Thanks

[@tonyallers9893]

Always appreciate the detail in your videos..thanks

[@ricklane8661]

wish more people thought this way,it would be a much better world.

[@1AAuto]

@sparkplug1100 You may want to take the door panel off to see if the window regulator has let go. We sell the window motors and window regulators on our website. Here's a link to the 1500 Silverado section. 1aauto.com/1A/-/Chevy/Silverado1500/-/-/2001

[@angryace4017]

I also have a slow window and recently it has been stopping altogether and I have to wait a few seconds to use the switch again and I can get the window up. Is there an easy way to know whether it is the motor, the regulator or both?

[@1AAuto]

You're welcome. Have a great day.

[@digitalmixer]

Is this the same for a 2002 chevy tahoe?

[@Glock19Girl]

Help!!!! What do you do if you didn't hold on to the wheel you talk about and it came out and unraveled? I tried raveling it back up but maybe didn't do it tight enough? can it be fixed? Please help! =)

[@Bigdots2007]

I have a 2001 Chevy Silverado with manual windows. Driver's side window does not roll up, although I can sort of force it up. Any advice on resolving the issue?

[@Not-The-Expert]

Okay, so I got it all apart just great, thanks to this vid. However, now the regulator is going up too high and sliding off it's own track. Is there a special way to connect the motor to the regulator so that it only goes up a certain distance? I fiddled around with it for a while and got it to go up even higher off it's track but am still having trouble getting it the other way. Suggestions, anyone?

[@Not-The-Expert]

Never mind.... Come to find out, it only has that problem when it's still out of the door. The window itself keeps the regulator from going up too high, LOL! Well, guess that's what DIY is all about: LEARNING! Thanks again for the video!

[@bschilli94]

is minor squealing normal after installing a window regulator?

[@DEDuck34]

I am having an issue with just getting the window free from it. What happened was my window is going down but now will only come up about 2 inches and stops. Not making squeeking noises just stops. so the window is still below in the door. How do I get it to release so I can tape it up and pull the regulator and motor out?

[@ltstup]

I have a 2002 Jeep Liberty and have everything disconnected, except the window motor! I can't seem to figure out how unplug it. It has a red tab that I have slipped into the out position, but it won't budge. Any suggestions?

[@pmweapon]

Do you have a video for replacing or fixing a 2003 yukon's lock since it was broken into and the part where the key goes in is jammed inward?

[@1AAuto]

We currently do not have an auto repair video on this particular auto repair. 1aauto.com 888-844-3393

[@jswolf5735]

Great video. My 2000 Yukon XL was slightly different, but your directions worked great. One question, is it a good idea to apply a small amount of grease to the tracks, if so, what kind?

[@1AAuto]

+J Swolf If you're just replacing the window motor, it wouldn't hurt to place a little bit of white lithium grease in the tracks. Hope this helps you out. 1aauto.com 888-844-3393

[@jasonminchew494]

very helpful video, had job done in less than 30 mins took longer to get door panel back on right

[@Theresa10297]

this is very informative and thorough. thank you

[@AmandaAlyssaAlex]

Awesome video! Thanks for taking the time to put this together.

[@1AAuto]

@Tobago12594 Thank you for watching. We carry a great deal of repair parts for your Chevy Siverado on our website 1aauto.com

[@johndyck6387]

I have a 2002 sierra and the driver's side window goes up VERY slowly no matter what season it is and the passenger side is fine, any ideas?

[@georgegaitan7462]

I can’t get my window regulator right to align up with the screws. I tried to push up the window no go.

[@1AAuto]

@Stix080803 Here's a link to the window regulators for a 2000 GMC Sierra on our website. Hope this helps. 1aauto.com/1A/WindowRegulators/GMC/Sierra/-/-/2000?ATony

[@scottkeller5805]

How do you release the window if it is down to replace the window motor and it wont push up manually. Thanks

[@1AAuto]

+Scott Keller You can suppor the window in the door and cut the cables where they cross. This will free the glass to be taped up in the closed position. Thanks for checking us out! 1AAuto.com

[@Buildwithbraden]

Would this b the same for a 2003 chevy s10

[@eddyj01258]

I have to the exact side motor this weekend, thanks for the video it doesn't look too bad.

[@1AAuto]

+Ed J Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowMotors?KZbin&CTA+Comment&AqNJpJM

[@darrellmorgan4041]

Can I get a link for a 01 serria manual hand crank track replacment.

[@betitoochannel6958]

Hey I have a 2001 gmc Sierra and my left window won't go up anymore I really need help ! Any suggestions ?

[@1AAuto]

Thank you for watching! You could have a problem with the motor or the switch. You want to check to see if you have power getting to the motor when you hit the switch. If you have power in both the up and down positions then its the motor. If not then its the switch. 888-844-3393

[@1AAuto]

@jasearles We carry replacement window regulators for your truck on our website. Here's a link to them. We also offer FREE SHIPPING on all of our parts. 1aauto.com/1A/WindowRegulators/GMC/SierraDenali/-/-/2003

[@1AAuto]

You're welcome! Let us know if there are any other installations you would like to see.

[@keithchartier3401]

How do you know which to replace? My window rolls down but it won't roll back up now. Would that be the motor or the regulator? The cable seems real tight. Is it suppose to that much tension on it?

[@zachnuketown]

Keith Chartier you could do what I did and pick up a regulator that has the motor already attached. That way you don't have to figure it out and you also don't have to worry about the part you didn't replace going bad in the near future

[@1AAuto]

@najemokd Thanks for the heads up, don't have one of those trucks right now but I'll see if I can get a hold of one.

[@TheOutdoorsman45]

Could I use this technique to pop a dent out of the door?

[@1AAuto]

You can use this video to remove the door panel. You may be able to get at the dent depending where it is. Thank you for watching. 1aauto.com 888-844-3393

[@dshep7850]

I have a 2001 GMC Safari passenger van. How would I go about changing the rear windows?

[@1AAuto]

+Deborah Shepherd Thank you for checking us out. We do not have any information for the rear windows, however some of the steps in this may assist with the removal. 1aauto.com

[@1morganfamily1]

Great instructional videos. Thanks for helping us all.

[@1AAuto]

+The Morgan Residence No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

[@rickmielke4538]

How long should this take at a dealership?

[@drizler]

Don’t take these things to a stealership unless it’s a warranty repair. ANY competent mechanic can do this as fast and easily . In the end you’ll pay half or less as much and be just as happy.

[@backlineguy]

...once you lift the door panel up, you're disconnecting the mirror, door lock, and the larger black clip ( which you mention you struggled with a bit)... the window switch that you're unplugging those clips from...have a video on how to replace THAT? My Keyless Entry quit, along with the window, lock and mirror on the Pass side...the Keyless receiver is inside the Passenger Door Module, which is inside that Passenger door window switch, and I need to replace that switch! ANY help will be GREATLY appreciated !!! excellent videos!

[@1AAuto]

We currently do not have a repair video on that particular repair.

[@backlineguy]

thank you for your reply. maybe I can figure it out from this video...

[@pmweapon]

Also 1aauto, how can i fix a slow rolling window on a 2003 yukon xl?

[@1AAuto]

If you take the door panel off you can add a little bit of white lithium grease to the window regulator track. Another trick that you can try to do is, spraying the weatherstrip seals around the window with silicone spray. If the weatherstrip is dried out, this will enable the window to glide easier. Hope this helps you out. 1aauto.com 888-844-3393

[@isaacperez3100]

A question do I Have to disconnect the battery or not?

[@1AAuto]

Thanks for watching. While it may not be necessary it is never a bad idea when doing anything electrical. 1aauto.com 888-844-3393

[@rebelandboltman]

Great video! What kind of tape are you using to hold the window in place?

[@1AAuto]

+rebelandboltman3777 You can use painter's tape. Hope this helps you out. 1aauto.com

[@dalyjolly5891]

painters tape'll hold it without leaving adhesive to clean up. Duct tape'll work, too.

[@1AAuto]

@cowboylukepowers Check my vide '1AAuto.com Install Replace Window Regulator Chevy GMC Pickup Truck SUV 88-98' That should answer your question.

[@cesarr5006]

Thx; my 08 Yukon passenger rear doesn't roll up from rear door but rolls up from driver control; what is the solution? Thx again

[@1AAuto]

You may want to check the rear window switch to see if there's power going to and from the switch. Hope this helps you out. 1aauto.com

[@cesarr5006]

1A Auto Parts Thx