Tap to unmute

1JZGTE POWERED LJ HOLDEN TORANA EP 2 - THE SKID FACTORY

  Рет қаралды 167,361

The Skid Factory

The Skid Factory

Күн бұрын

Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory, Al, Woody and Lee position the 1JZGTE into the engine bay of Lee's LJ Torana and unbox some shiny parts that arrived from Golebys.
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
www.instagram....
www.instagram....
/ theskidfactory
www.instagram....
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

Пікірлер: 403
@theskidfactory
@theskidfactory 4 жыл бұрын
We have a bunch of new merchandise available including Flat brim hats to suit your mini truck, Curved brim hats for your uncle Jim and Beanies to keep your grey and or balding head warm. Get them here!! www.theskidfactory.com
@Unclepeterxy
@Unclepeterxy 4 жыл бұрын
Any chance u can share the link for the manifold is exactly what I need for my car
@stack3r
@stack3r 4 жыл бұрын
Any 8 balls?
@JesusisJesus
@JesusisJesus 4 жыл бұрын
The Skid Factory - or is it “The Skid Mark Factory.” ???? I LIKE, Subscribe. I liked this video so much I hit the button twice.
@pashakdescilly7517
@pashakdescilly7517 4 жыл бұрын
@@stack3r Most people only need two
@aaronhogan2371
@aaronhogan2371 4 жыл бұрын
Are you going to reinstall a period correct stick mag under the seat?
@spiritlevelstudios
@spiritlevelstudios 4 жыл бұрын
Naturally. How could you not.
@Martin-ec7fd
@Martin-ec7fd 4 жыл бұрын
I think I buried some in the woods near my parents house when I was a kid. I could go dig them up for you.
@imoovabull6042
@imoovabull6042 4 жыл бұрын
@@Martin-ec7fd MMMM Sam Fox....
@dangerousdave5076
@dangerousdave5076 4 жыл бұрын
Hahahaha....period
@yowie0889
@yowie0889 4 жыл бұрын
@@Martin-ec7fd scrub turkeys would have shredded them for nests ages ago.
@LitchKB
@LitchKB 4 жыл бұрын
"[...] wrapped up, Bad Boy Bubby style" ROFL
@12onin_Gypsy
@12onin_Gypsy 4 жыл бұрын
My thoughts exactly
@TheTeeroy32
@TheTeeroy32 4 жыл бұрын
How come... cat no gas mask? Don't need one... cats don't breathe.
@johnkalach2908
@johnkalach2908 4 жыл бұрын
You be sexy woman flo
@youngfisho
@youngfisho 4 жыл бұрын
They be nice cam gears flo, one of the seven wonders of the world. Its perfection flo.
@SmacattackL
@SmacattackL 4 жыл бұрын
funniest thing I've heard for a while
@jonfinderup2437
@jonfinderup2437 4 жыл бұрын
You ride an Orange 2 stroke dirt squirter and are also a connoisseur of the finest piece of Australian cinema. Is there no limit.
@jamesnaismith81
@jamesnaismith81 4 жыл бұрын
Bad Boy Bubby straight out the blocks. Al is a man of taste and culture. South Aussie classic like a VL.
@imoovabull6042
@imoovabull6042 4 жыл бұрын
when i did my LC i removed the front xmember complete on the wheels.. test fitted engine to clearance then rolled it all under and lowered the body onto it. i went TKO 600 / 9" and chassis kit and had to minor mod the tunnel also. easy to do with the entire combo on the front end, just hoist the body.. massage lower.. rinse repeat. you are going to enjoy driving this car, power over steer available any time...
@stinkfinger1942
@stinkfinger1942 4 жыл бұрын
You had me at "Bad Boy Bubby style"!
@jamestehuna5915
@jamestehuna5915 4 жыл бұрын
That’s a good boy Bubby 😂
@dreamitbuildit1380
@dreamitbuildit1380 4 жыл бұрын
As Woody says to Al. Thems angel’s tits!
@OldSmeG
@OldSmeG 4 жыл бұрын
Meow 😸
@jamestehuna5915
@jamestehuna5915 4 жыл бұрын
Dream it, build it! 🤣😂😅😂🤣😅
@jamestehuna5915
@jamestehuna5915 4 жыл бұрын
Matt Peacey 🤣😂😅😂🤣😃😅 stay away from that glad wrap 😂
@Paulman50
@Paulman50 4 жыл бұрын
It's a great channel that doesn't show 30 minutes of turning, welding, wrenching, etc and 2 minutes of the good stuff.
@fendel_
@fendel_ 4 жыл бұрын
Really looking forward to following this project! That exhaust manifold looks amazing.
@martyburgess341
@martyburgess341 4 жыл бұрын
Can't wait to hear this when it's fired up! I love sixes! They can be as mean as V8s!
@Jonathan_Doe_
@Jonathan_Doe_ 4 жыл бұрын
Highly boosted 5 cylinders are the meanest sounding of all.
@feenyx6394
@feenyx6394 4 жыл бұрын
@@davidmackieson4609 I reckon straight sixes sound heaps better than V8s really, unless the V8 in question is a high revving Italian example!
@TheRealMrCods
@TheRealMrCods 4 жыл бұрын
OMFG Did you just say "Bad Boy Bubby" You sick sick man Mate 🤣🤣🤣
@geotard
@geotard 4 жыл бұрын
You spend years thinking you're the only one who watched that movie, then this 😂😂😂😂😂
@jeepnutscotty
@jeepnutscotty 4 жыл бұрын
Pure Aussie movie gold... If you haven't seen it, your not a true Aussie 🤣🤣
@FuManchu5ltr
@FuManchu5ltr 4 жыл бұрын
Missed a chance to say, “Make the noise” with that level like the Bad Obsession Motorsport guys.
@grumpyoldman-21
@grumpyoldman-21 4 жыл бұрын
bring the thunder ......and my cold snacks
@888johnmac
@888johnmac 4 жыл бұрын
yeah , but my inner voice said it.. so all good
@duderobi
@duderobi 4 жыл бұрын
I laughed so hard when Nik said no turbo on Binky and Al spit the tea :-) and the still at the end with Al and Woody was really good.
@stevevesotsky6849
@stevevesotsky6849 4 жыл бұрын
So keen for this build, so excited! That exhaust manifold looks boss, gonna be a killa build guys
@350stato
@350stato 4 жыл бұрын
LOL at Lee crossing Dave's name out ha ha Nice shirt Al, Where can I get one? lol
@alexdeakin4266
@alexdeakin4266 4 жыл бұрын
Whats the deal with the David Fraser dude ? Sorry missed the joke ?
@StreetDreamzTT
@StreetDreamzTT 4 жыл бұрын
Sweet episode guys. Can’t wait for the cutting to begin 😂👍🏼
@bradleykempton6655
@bradleykempton6655 4 жыл бұрын
Fantastic as always never a bad video ever ever ever. Skid factory fooking turbo yeah baby yeah!......
@tutekohe1361
@tutekohe1361 4 жыл бұрын
My mate Shane Curwood from Lake Biddy, W.A., put a 302 Chev (yes, 302) in a XU1 in the early ‘80s. It was a battle.
@guy_autordie
@guy_autordie 4 жыл бұрын
Awww, al with his baby in his arms at the end.
@robertwells6454
@robertwells6454 4 жыл бұрын
I have always been a big cubic in. Guy, but You Guy's are changing My way of thinking. Cool stuff. 🤘
@theskidfactory
@theskidfactory 4 жыл бұрын
Big cubes are also good.
@mrb1864
@mrb1864 4 жыл бұрын
Oh man with all these pre bought parts you be doing laptop config and first start next episode . the exhaust manifold looks decent fit and easy tweak . Don't let woody paint it, he terrible with red lol . Going be a sweet looker when done .
@Mantenner
@Mantenner 4 жыл бұрын
Would love to see you do another E30 build guys! Doesn't matter what it is, they're just wicked cars!
@ddgarage7025
@ddgarage7025 4 жыл бұрын
Skid factory on my birthday! Hell yeah
@chrisrosie0584
@chrisrosie0584 4 жыл бұрын
Happy Birthday bud, its mine to 👍
@Pepper_brooks
@Pepper_brooks 4 жыл бұрын
Happy birthday!!!
@ddgarage7025
@ddgarage7025 4 жыл бұрын
Thanks everyone 😁
@tiperformance
@tiperformance 4 жыл бұрын
Nice hat Al! Keep up the good work, making good progress on this one.
@joealex65
@joealex65 4 жыл бұрын
Of course, it wouldn't be a TSF build without some good ol' Subaru parts bin special! 😂 Can't wait to hear it running! 😁
@PX125E
@PX125E 4 жыл бұрын
Ya got nice motor flo! Seventh wonder of the world
@slow_lml3683
@slow_lml3683 4 жыл бұрын
Stoked to see this one through
@keithryan9314
@keithryan9314 4 жыл бұрын
Looking forward to this build, alot of challenges ahead of ye dudes.
@justinmann6797
@justinmann6797 4 жыл бұрын
Stoked new build !
@aaroncutts
@aaroncutts 4 жыл бұрын
Allan schooling Woody on the www's got a laugh out of me 🤣 picking up a beanie now!
@JRowe95
@JRowe95 4 жыл бұрын
Mad overnighted engine from Toowoomba.
@CaptainLowside
@CaptainLowside 4 жыл бұрын
5:30. Smooth.
@liamhover3029
@liamhover3029 4 жыл бұрын
I saw that too. Who’s being scratched off?
@liamhover3029
@liamhover3029 4 жыл бұрын
Haha never mind. Seconds later the answer is revealed!
@Josh-e2l
@Josh-e2l 4 жыл бұрын
Bad boy bubby, there's a movie you can't forget
@colwk
@colwk 4 жыл бұрын
Is that the standard spot the for a 8 ball on a JZ or a performance upgrade
@jason35177
@jason35177 4 жыл бұрын
Another great conversion! Thanks for sharing 😁
@michaelleonard4020
@michaelleonard4020 4 жыл бұрын
Liking the Torana build boys
@FuManchu5ltr
@FuManchu5ltr 4 жыл бұрын
Nice cams Flo. Great big whoppers of things.
@mattfisher4256
@mattfisher4256 4 жыл бұрын
Great car and engine combo, love the content. Was hoping for a larger turbo. Please paint this an original colour from the torana catalogue
@1ocean515
@1ocean515 4 жыл бұрын
Great video. Lots of information and useful head scratching. 👍
@rileyharrison1381
@rileyharrison1381 4 жыл бұрын
Rock solid Boys keep it rolling
@shadowsandfire
@shadowsandfire 4 жыл бұрын
Rolf de Heer references 30 seconds in, I wasn't ready for it!!!!!!
@Slothsport
@Slothsport 4 жыл бұрын
guys, try the booster pedal assy off a sb barina. its upright not horizontal, would be perfect for this
@adamheazlett1179
@adamheazlett1179 4 жыл бұрын
Bad boy Bubby what a classic,My kids got the movie but are not willing to watch it. Do you remember The Cars That Ate Paris Woody needs to watch these movies to expand his thoughts.If he is good maybe Romber Stomper
@Darkhalfcustoms
@Darkhalfcustoms 4 жыл бұрын
Very nice tiny car big power.
@NeverLetOff
@NeverLetOff 4 жыл бұрын
The grot in that rug... It almost had me gagging and I am only seeing it on a laptop. I have smelled that before
@mattrogers1902
@mattrogers1902 4 жыл бұрын
All your cars are like bad boy bubby, all they need is a bit of love!
@nismofreak33
@nismofreak33 4 жыл бұрын
you guys are an inspiration
@idriwzrd
@idriwzrd 4 жыл бұрын
The Torana is my new favorite car. It used to be the Monaro (especially an HQ). But after watching four straight seasons of TCM, I'd have a Torana any day of the week. If that makes me even more bogan, I'm fine with it.
@cripple10
@cripple10 4 жыл бұрын
Lee writing his name on the hoist post at 5:45 😂😂
@scottwilson8474
@scottwilson8474 4 жыл бұрын
Those manifolds look sweet!
@liamneil5143
@liamneil5143 4 жыл бұрын
Im keen to see what those elockers are for! I hope its for your boily boi td42 👍
@bryandreggors8540
@bryandreggors8540 4 жыл бұрын
8 ball in the crank case ... for that mad 80s rattle
@sherifroberts7776
@sherifroberts7776 4 жыл бұрын
It's just great to see a real aussie car getting back on the road
@jamiegrace7541
@jamiegrace7541 4 жыл бұрын
Love ya work boys keep it coming
@playwme3
@playwme3 4 жыл бұрын
Lotta beards in the skid factory this week. Hope Woody’s not feeling too left out with his little fuzz patches.
@JohnComeOnMan
@JohnComeOnMan 4 жыл бұрын
Just powered out six stick mag ugga duggas and I'm ready to watch!
@OvertakingLane
@OvertakingLane 4 жыл бұрын
I like the colour of the underside of the bonnet, maybe repaint the car that colour 😉
@Fredd0rules
@Fredd0rules 4 жыл бұрын
Now this guy right here ^ is on to something 🤔
@ShainAndrews
@ShainAndrews 4 жыл бұрын
Strong pass from me.
@benpaganoni8444
@benpaganoni8444 4 жыл бұрын
Another great clip....jealous of the shorts and mask free life that's for sure !!! really look forward to each episode this will be a great car
@matthewrossendell6762
@matthewrossendell6762 4 жыл бұрын
Shes Going to be a wild ride!
@johnsmith-qz4bv
@johnsmith-qz4bv 4 жыл бұрын
looks sick in that engine bay....
@Kebab_OMG
@Kebab_OMG 4 жыл бұрын
Good stuff guys! Can't wait!
@582_Motorsports
@582_Motorsports 4 жыл бұрын
You can buy 1jz into lj/lc Tirana engine mounts from Castlemaine rod shop !!!!
@theskidfactory
@theskidfactory 4 жыл бұрын
They must require the complete tubular front end also as there is no way any of these sumps will fit.
@lewisyoung3101
@lewisyoung3101 4 жыл бұрын
A BARRA in the Torana, for the Win
@haydenwatts4259
@haydenwatts4259 4 жыл бұрын
Hanging out for episode 3
@mitchellcrowe8545
@mitchellcrowe8545 4 жыл бұрын
Well I just looked up Bad Boy Bubby cause wasnt familiar with the reference.....dang Al what a reference indeed 😂 fantastic video as always guys!! Keep up the great work. Lots of love from the states!
@SunburnedNomad
@SunburnedNomad 4 жыл бұрын
I'm subscribed. I liked. And my comment is "You guys are awesome. Keep doing what you do & I'll keep watchin'!"
@JimmyJamm
@JimmyJamm 4 жыл бұрын
Hey you left the 8 ball in the oil sump!
@statementleaver8095
@statementleaver8095 4 жыл бұрын
And he's left the 'pocket' wide open for the 'que' of 'pots fired' 'chalky' comments lol
@ECMUnltd
@ECMUnltd 4 жыл бұрын
The short pants style of Aussieland never ceases to amaze me!!! hahahahaha
@saltydog888
@saltydog888 4 жыл бұрын
Welcome to Oz mate
@mitchellsies
@mitchellsies 4 жыл бұрын
Yeah these are the builds ! Keep it up guys :)
@robertsomerville320
@robertsomerville320 4 жыл бұрын
Thank you Al for the always crucial info when doing unique swaps. Would you ever consider putting on a 2-3 week camp in AU. (caveat: leave wives at home) where people around the world could pay to come down to learn a basic swap from you? It would be a Mechanics dream holiday, as least this mechanics dream holiday. Pleeeeeease. Cheers, Rob. Winnipeg MB, Canada.
@seanyc89
@seanyc89 4 жыл бұрын
Fkn love this channel. Good work lads!.
@matthewnarine
@matthewnarine 4 жыл бұрын
Al has to be the funniest person in the MCM universe by a myth. Maybe you can also add a timer to the video that indicate at the end of the video how many hours was spent in the episode and keep tallying it until the final episode.
@jm361
@jm361 4 жыл бұрын
@ 11:25 someone has a dope mountain bike, it appears to be a Cannondale? If its not to much to ask, is it possible to get a mini tour of the layout of the home/shop? Its pretty neat given the fact of the short walk/drive to work! I ask because of Al's ingenuity intrigues mine/our mines and may inspire 1 to copy/day dream a similar shop/home build!
@aaronpineau3760
@aaronpineau3760 4 жыл бұрын
nice keep up the good work
@gable3448
@gable3448 4 жыл бұрын
I really enjoy your contents, as always guys, can't wait for next episode. Cheer from Canada!
@LupusSanguis
@LupusSanguis 4 жыл бұрын
Al's the cling wrap killer 🤣
@rjl110919581
@rjl110919581 4 жыл бұрын
THANK YOU FOR DETAIL VIDEO
@richardgarwood4393
@richardgarwood4393 4 жыл бұрын
What about milling an angle on the exhaust flange to realign turbo. Or a wedge shim?
@WhiskeyGulf71
@WhiskeyGulf71 4 жыл бұрын
Funny you compared it to the Bedford, same sort of thing........ same vehicle make that was shipped across to Australia for a bigger engine to be fitted ! Same era as well. What's your favourite RB ? Mine is an RB2-11 😂
@Jack-tx2ve
@Jack-tx2ve 4 жыл бұрын
The skid factory, it works.
@JungaBungaRacing
@JungaBungaRacing 4 жыл бұрын
I wonna see this down at Warwick Dragway one meeting in the near future
@theskidfactory
@theskidfactory 4 жыл бұрын
Aiming to have done by the road trip.
@markstone5593
@markstone5593 4 жыл бұрын
6 bolts drop the kframe out, fit motor to kframe, then fit it all back from underneath, quick and easiest way.
@scottieb8313
@scottieb8313 4 жыл бұрын
Well done Guy's (Al / Woody) Amazing work as all ways !!! :) really hope the owner goes back to a black interior and puts in something like Fishnet Recaro front seats in , .....to keep it yet dated / yet modern , keeping him in place with the new power level once completed .........
@garythompson883
@garythompson883 4 жыл бұрын
About 15 years ago I was repairing a transit van, I had never seen anything so filthy, to the extent that I was looking for a fault with the lights and lifted the carpet and near spewed. The fault didn't get fixed. The owner came in and asked if we detailed, we threw him a box of matches.
@ThinkCriticallyNow
@ThinkCriticallyNow 4 жыл бұрын
Well that was riveting.....
@malliz1
@malliz1 4 жыл бұрын
Miss my Lj sleeper with the 202 half race cam and sunvisor
@vertial
@vertial 4 жыл бұрын
Lee has nice hand writing.
@Frontman936
@Frontman936 4 жыл бұрын
The dose noises out of this is gonna be sick. Would be good to see it retrimmed with another boat interior as a tribute to its fully sick previous life.
@samueldesbiens2524
@samueldesbiens2524 4 жыл бұрын
Amazing build guys
@Stungray22
@Stungray22 4 жыл бұрын
Love a good skid vid
@suthomate287
@suthomate287 4 жыл бұрын
Keen for so much more!!
@nathannevard797
@nathannevard797 4 жыл бұрын
Bad boy bubby style, classic Aussie movie.
@Adrianzx
@Adrianzx 4 жыл бұрын
Probably should have k-24 swapped it bro; I'm on the shop floor laughing. Back to watching this while not doing my wheel bearings
@MrWilliam.Stewart
@MrWilliam.Stewart 4 жыл бұрын
What the frac's wrong with Woody? He could paint a surface if he wanted. The blokes got more skills than he's willing to admit. He's the glue that's bonding this awesomeness together. In fact, Woody is the messiah that allows us all to appreciate what is big All's 50 + years of experience and expertise.
@malcolmyoung7866
@malcolmyoung7866 4 жыл бұрын
More stuff learned.. Cheers..
@c.spencer2338
@c.spencer2338 4 жыл бұрын
Hey guys, Love the new build. I was wondering if Skid Factory / Mighty Car Mods / Bennys Customs / Nugget Garage would be interested in a Unique Build. Every few years a group of people race across Asia to Europe on the Peaking to Paris Tour. Lots of unique cars from all over the 1900s. The reason I ask is that My Area of NC is saturated with 60s-80s Rolls Royces and many of them go for under 10,000 (most non running or in need of services). I know the cost for import would not be too terribly expensive. With your combined talents it would not be any trouble to put a 2JZ or some form of Diesel engine into the Royce. possible 4WD conversion.
@RICHOCHANGO
@RICHOCHANGO 4 жыл бұрын
4:27 Al rides the mechanical bull
@ronswanson1149
@ronswanson1149 4 жыл бұрын
Nice t-shirt mate. Im wearing the same one 👌
@81nbb
@81nbb 4 жыл бұрын
"Had some leftover from his speedboat retrim"
@grumpyoldman-21
@grumpyoldman-21 4 жыл бұрын
waterproof ... from the sounds of the shenanigans that occurred in that car ...it was a wise choice
@adrainmcconnell8918
@adrainmcconnell8918 4 жыл бұрын
cat not breath . love your work team
@--Zook--
@--Zook-- 4 жыл бұрын
After years of trying, I finally got like # 223. Bucket list complete.
1JZGTE POWERED LJ HOLDEN TORANA EP 3 - THE SKID FACTORY
39:07
The Skid Factory
Рет қаралды 162 М.
Unboxing the Hulkosuka’s NEW Powerplant!
23:58
The Skid Factory
Рет қаралды 187 М.
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
The COMPLETE History Of The ZR1 CORVETTE
17:31
C&S Corvettes
Рет қаралды 2,4 М.
1JZGTE POWERED LJ HOLDEN TORANA EP 5 - THE SKID FACTORY
35:01
The Skid Factory
Рет қаралды 145 М.
Can you replace a carburetor with a fuel injector?
20:50
Garage 54
Рет қаралды 326 М.
Over The Top Exhaust System - Cummins Patrol EP9
25:13
The Skid Factory
Рет қаралды 186 М.
1JZGTE POWERED LJ HOLDEN TORANA EP 9 - THE SKID FACTORY
30:45
The Skid Factory
Рет қаралды 130 М.
Building a $200 BARRA to make 800HP
18:41
The Skid Factory
Рет қаралды 259 М.
Drilling Holes in $6000 Turbos - THE SKID FACTORY
23:44
The Skid Factory
Рет қаралды 164 М.