Thanks so much. Never heard the explanation about the pick tool AND the fact that ALL FOUR connectors can't be disengaged simultaneously! My first Knipex purchase arrived just before Father's Day. I'm very happy with these Twin Grips! Thanks for promoting them over the years. You inspired me to buy them.
@KMFDM7812 жыл бұрын
I like to loop a couple zip ties together to make a big circle and hook it under the connector of the coil as far back and close to the coil body as possible, then I can apply steady upward force as I work the back part up with my fingers. Works every time with zero drama.
@user-hc9sk3mg1h Жыл бұрын
Genius initiative. I'll give this a shot.
@Peotrichko11 ай бұрын
Big big thank you! This video saved me in a village far from any cities. Car was frozen and only replacing hot coils helped me to start the engine
@JC_TheDirector3 ай бұрын
Video was a life saver and the curved pick tool cut down on a lot of time. I literally went to advance auto, got my coils, and swapped them out in their lot on my lunch break.
@CosmicConner Жыл бұрын
I highly recommend magnetic spark plug sockets helps a lot if you have oily plugs
@freddyvaldes69552 ай бұрын
I like all your invented tools you are more cuban than me
@balamsingh19802 жыл бұрын
Very nice idea to unclip the connector.. I tried.. And succeed in a minute or two✌ kudo my dear 💕
@brandoni492 жыл бұрын
2 of 4 good enough for government work. 🤣😂🤣😂
@BargainBandit2 жыл бұрын
Cool change with the background music. I’d love to see you change auto transmission fluid on a B8 A4
@ramonovazquez43512 жыл бұрын
I’m going to replace the plastic cover to the hardness when I rebuild my engine; hopefully this summer. And also put in new coils; I got some cheap ones in there from autozone.
@markchase45137 ай бұрын
Here's a fun tip. Should the boot tear, you have to buy a coil to get the boot.
@shawnjohnson91332 жыл бұрын
Hey naptown....I need help rebuilding my 2.0tfsi 2009 audi engine. I live in Wisconsin... help?
@shultzography907410 ай бұрын
I followed this video as well as looked into 25 others and forums as well. The connector cracked where I tried to pry with the pick and still won’t disengage from the coil pack.
@peterbryan27532 жыл бұрын
Is there a way to contact you directly?
@Majdyakan002 жыл бұрын
What are the torque specs for plugs? 21 ft/lbs?
@biz4twobiz4632 жыл бұрын
yes, between 18 and 22 ft-lbs
@justlivingthatketolife2 жыл бұрын
And I just did my GTI's Valve Cover Gasket, Spark Plugs, and Ignition Coils. Legit Info on that site!
@GolfSwag422 жыл бұрын
Anyone know what the plug gaps are for 2.0t fsi? I’m getting ready to change them in mine and I know they’re pre-gapped from the factory but I’d like to check them for peace of mind
@zzzzzzzsssss Жыл бұрын
0.032
@brianinglis21992 жыл бұрын
Gotta have a good set of picks working on these
@noelmatheson1009 ай бұрын
If all my clips are broken can that cause a multiple misfire p0300. I’ve changed coils plug’s injectors chasing this misfire. I have a lot of carbon buildup wondering if that could be it too.
@thebigbosss10002 жыл бұрын
Those spark plugs are pre gapped but you didn’t check if gap was correct? I bought same ones and 1 spark plug had a gap of 0.40 not 0.32
@lino24132 жыл бұрын
Hey i have an Audi a4 2009 can you please make a video of how to Change the lifters of the Audi please thanks
@logangreen84172 жыл бұрын
More ccta content please
@jaychen2000metal8 ай бұрын
2014 2.0t cylinder 1 is the first on left?
@miguelruvalcaba42602 жыл бұрын
Hi, when it's necessary to change the ignition coil?
@NaptownTuner2 жыл бұрын
Every 100k miles or less only original equipment or equivalent
@miguelruvalcaba42602 жыл бұрын
@@NaptownTuner thanks for answering me
@Jcarney872 жыл бұрын
You have a B8 water pump install vid you can link ?
@stevenc43922 жыл бұрын
one of my ignition coils wont go all the way down is there anynone that can help me?
@balamsingh19802 жыл бұрын
I used a hard wire 0.5 mm instead
@scrwbl82 жыл бұрын
Do you have any tips what way to get a clip on a rattling waste gate arm on my A5? It's between the turbo and the engine block, so I can't reach in between .... maybe from the bottom, the next time I got it in my friend's shop. Replace the coils, ignition cable holder and connectors since they were too brittle to my taste.
@CP-ok1gv2 жыл бұрын
@10:04 😂
@user-yl1zp5kp5k2 жыл бұрын
Hello, please buy special tools for remove ignition coil. It is cheap tool.
@NaptownTuner2 жыл бұрын
If I had it I’d never use it.
@user-yl1zp5kp5k2 жыл бұрын
@@NaptownTunerHave a nice day!
@njroyalty4 ай бұрын
i only see 4 here, wheres the 5th one 🤔 edit: oh this is only a 2.0 I have a 2.5 😩