2.5 years into 159 Seconds The Friction Pro Single Point Hop up

[@jeffreyblaisdell1988]

It would be interesting to do comparison videos between stock guns in your quad system review and then do the rest over again after installing the friction pro.

[@4UADSmartAirsoft]

This one we can do for sure , but to compare it with other brands bucking we will not do it because we are simply not in the position to do so

[@jeffreyblaisdell1988]

@@4UADSmartAirsoft agreed. Most people upgrade their bucking hop unit and barrel and throw out a their meh stock buckings and then crow about their performance increase anyway. So long as it outshines the original then it’s worth it. But as soon as you test more than one gun with the same upgrades you get a different picture. Like you said in the video, this part is the beating heart of all airsoft guns. Most middle priced guns just need better hop bucking. Cyma platinum and krytac barrels are pretty good. But then people try to cram a MAXX in there with a prommy and think that $120 is what made it better more than the flat hop or maple leaf they put in there for $15-$20. Don’t get me wrong they can help but, but there is probably a good reason why your coming out with a packing and not a hop unit/barrel… yet…

[@4UADSmartAirsoft]

@@jeffreyblaisdell1988 haha dude I can’t agree more man, alright I really need to get one of this episode filmed for sure!

[@robsorgdrager8477]

I agree. The thing I find , using mostly m4/V2 with rotary hops is the incompatibility. I mean the hops and buckings and nubs and arms don't always work well with other parts. I'm praying these quad frictions will help me dial in my m249 . I have a longer barrel and a bore up kit in it but my range is poop and I'll group a 2 ft circle at 40 ft

[@david40k]

Why not? You have your bucking and you can easily buy other buckings, then setup tests to compare the two? (do atleast 100 shoots each to compare the results) @@4UADSmartAirsoft

[@MegaChickenPunch]

Seeing the animation, i don't really see why this would be better than existing designs.

[@Tygrys205]

Interesting if not only for the fact there have been many miracle buckings over the years but they all more or less ended up being the same.

[@mattraven8450]

Laughs in Mapleleaf

[@sheepmasterrace]

@@mattraven8450 PDI W hold's design is 15 years old and still works better then every maple leaf i've tried

[@pyroromancer]

2.5 years of cat cameos

[@TehSnake586]

Сool introduction, but was expecting the comparison and full auto shootings tbh.

[@unfussylobster]

I'm sure they will do a full video with all the data points. They are just introducing their new product. Give it a few days, and I bet they will post another video with more information.

[@kablehunter060]

Waiting for this to be available in PH, thank you guys for your efforts! Super great contents!

[@4UADSmartAirsoft]

Haha thanks buddy we are confident you guys like it

[@arthurlirafilho6678]

Well, I've tested quite a number of buckings in these last few years and let me say, Is good, if you're not sure really give it a try! tests made using a vfc bcm mcmr aeg (asia version) 1,45 joules on 0,32g bbs stock hopup chamber stock hop arm maple leaf 275mm 6,02 inner barrel (stock to asia version) standard compression kit (asia version) 60m no problem, 70m max range loosing momentum.

[@bs006]

佩服你們的毅力👍

[@4UADSmartAirsoft]

Gotta do it

[@justinwrye1308]

Excited for these

[@andrewbasford1848]

I'd be interested to see how they compare to my usual bucking. Promy purple, Maple Leaf, G&G green and Flamingo. As of late I've had the opportunity to test and review some of the latest cnc hop units for a certain company. As said I'd be interested to see how your products perform with these.

[@Systema_AC]

I can confirmed the quality of the performance that you get with this bucking, i have installed on a cyma m16 bb .30 with 1.64 joules, the accuracy is amazing, and on a krytak lmg bb .30 1.89 joules with the same performance. This bucking reach more distance with less nub pressure. Regards from México 🤙🏽

[@4UADSmartAirsoft]

Thanks man~~ that’s great news for us! Glad you like the buckings, we will keep them coming!

[@chiyingliu1956]

This is sick 🔥🔥🔥🔥

[@jjsgame7683]

lovely~~can't wait for it.

[@cristobalquintanilla.i.]

Saludos desde Chile 🇨🇱🤘🤘 en mis réplica AEG tengo una puesta una gomita 4AUD🔥🔥🔥🥩

[@brownbrown1493]

摩擦大師🤣🤣🤣🤣

[@伍駿傑]

很鬧😂😂😂😂

[@4UADSmartAirsoft]

摩好摩滿

[@WinteR5]

...and 2.5 years later finally available in Europe 😅🎉😂

[@4UADSmartAirsoft]

Lol red wolf Europe will have it soon

[@andrewloyd23]

I know yall wouldn’t recommend it probably but if I wanted to use a flat nub what would I potentially see? I have had a lot of bad experiences with concave nubs and have found Flat just works better most of the time for my rifles.

[@4UADSmartAirsoft]

Try the double contact nub you will like the result

[@J1m._.]

期待上市😚

[@kl1988]

where to find it????????im in EU!!!!

[@4UADSmartAirsoft]

We are working on it

[@CAAT308]

Can’t wait to get my bucking

[@zzz5776]

1:04 glock 60m 這麼準!? 太神啦... 必買

[@boothy2236]

Sounds like an AEG in the range test

[@4UADSmartAirsoft]

沒啦那個是電槍

[@周家弘-b1d]

剛剛好我缺一個精準的hop皮 必須買👍

[@4UADSmartAirsoft]

來來～～試試看

[@pauloshen9521]

恭喜

[@4UADSmartAirsoft]

謝謝

[@suphakornthepbamrung1023]

Any modifications for stock TM MWS inner barrel?

[@Blackfox-1337]

When will be the release? Need a bunch of them in Germany

[@Toni.Sky_R32Gtr]

Jaaa😂

[@copperandbrass]

Ich kümmere mich gerade um den Import. Laut Andrew sollten die im Januar in Deutschland ankommen.

[@Blackfox-1337]

@@copperandbrass guter Mann. hoffe das da auch 7mm AEG Varianten dabei sind lg

[@copperandbrass]

@@Blackfox-1337 es wird nur ein Gummi für AEGs und eins für GBBs geben. Beide im TM Standard

[@Blackfox-1337]

@@copperandbrass Also 5mm nehm ich auch gerne 👍🏻

[@marcoviebrock1550]

I like to have one for testing in the EU. Unfortunately I think it isnt made for my guns shooting 2.5-3J with 0,4-0.45g bbs.

[@4UADSmartAirsoft]

Don’t worry all my sniper rifles are shooting with 2.8j with 0.48g

[@Ray-gm2uk]

Looking forward for it , also how much for the price?

[@stewbacca117]

Excitement intensifies. I wanna throw them in my PSG-1 and FAL among others 🍻😏😎

[@4UADSmartAirsoft]

Waiting for your feedback!

[@david40k]

much hype. but wheres the data / comparing it to another bucking?

[@david40k]

Pretty sure they already did it, assuming they tweaked things during testing but havent released it yet for what ever reason…(money?)

[@4UADSmartAirsoft]

Hahahaha you guys know us well lol

[@marine_ronin0137]

🥳🥳🥳🥳

[@KH-fh4gt]

❤👍👍👍用心的產品

[@4UADSmartAirsoft]

一定要的，不想出來亂騙，不喜歡的絕對不賣

[@Naaps]

Sick !!

[@gabrieliuspiecaitis7546]

How good is the seal on an hpa gun? I have a wolverine mtw, and would like to install one soon

[@梁偉倫-k9q]

等待你們研發出來的金密管這類的產品

[@4UADSmartAirsoft]

研發中

[@TheLegendMakaveli]

Gimmi bucking

[@JedociderShou]

Ugh I can't comment the "shut up and take my money" meme 😂

[@4UADSmartAirsoft]

Hahaha it will not disappoint you

[@JedociderShou]

@@4UADSmartAirsoftwell as expected from u guys anyway what's the retail on those and when will it be out?

[@happywolf3971]

能不能做一部與其他家的hop 皮對比的影片，不然實在看不出不同於其他家的特色在哪

[@4UADSmartAirsoft]

我們會拍一集專門介紹我們皮的影片喔! 但就不會去比較了因為我們相信球員不能兼裁判

[@suphakornthepbamrung1023]

It looks like flat hop built-in bucking, isn’t it? How is it performed by using lightweight BBs (0.2-0.25) below 1J?

[@4UADSmartAirsoft]

like a charm

[@belgianbadger8404]

shame i live in the netherlands i would love to test these out

[@copperandbrass]

Should be in the German copper and brass in January 🙂👍

[@ali-tr5pn]

How can I contact you?

[@4UADSmartAirsoft]

Please go to our facebook fan page

[@TheMaicena]

Will it work better than my stock ssp5 hop up? If i shoot 0.2 or 0.25 bbs i mean.

[@4UADSmartAirsoft]

It works great!

[@thepompking8842]

Does it have tight feed lips? If the bb falls through it won't work for my redline n7 milsim hpa.

[@4UADSmartAirsoft]

nope no tight feed lips since it would cause jam on different guns

[@thepompking8842]

​@@4UADSmartAirsoft darn then it won't work on my redline n7 milsim. Or any closed bolt hpa for that matter. I thought tight lips was good. Long lips cause jams if im not mistaken?

[@hoecage8781]

@@thepompking8842 both, you generally don't want to hold the bb at the lips you want to hold at the start of the patch. The lips should just be thick enough to seal with the nozzle.

[@ironhulk1979]

So the same results you get with the good old G&G green then 🤣🤣🤣

[@4UADSmartAirsoft]

how to you know ;D

[@crackaopen3684]

very cool. so does it come for ghk m4?

[@4UADSmartAirsoft]

Yep

[@hank8293]

Can I beat Marui's accuracy with vfc and ghk with this product? Can I throw away the mws made of zinc?

[@4UADSmartAirsoft]

Well it’s now your turn to test out

[@empireaxe6113]

Waiting for this to come out on evike so I can drop by in person and try it out. But what would been based if you guys added a Clip ring kind like Maple leaf but as a black ring the 4UAD super sealing frictionless buckings

[@4UADSmartAirsoft]

Get your hands on one of these and test it out!

[@empireaxe6113]

@4UADSmartAirsoft are they available on your website? And are you overseas or do you guys have a American retailer other then evike since they won't have the buckings till half way though January

[@empireaxe6113]

​@4UADSmartAirsoft update I did but won't get it till mabye thrusday . (It's currently Sunday afternoon at this time ) Also what kind if concave or type of patch did you all come with again? I could barely tell.

[@toni-pz1ys]

donde las consigo

[@4UADSmartAirsoft]

Stay tuned

[@bluesea-v6d]

👍👍👍

[@DatAirsofttDude]

What hop up do you recommend with these?

[@4UADSmartAirsoft]

Any stock hop up chamber

[@rwslayer3607]

it looks impressive and the point looks pretty fit my style and reliable. I was thinking about not to attend the MOA but this video might change my mind.

[@4UADSmartAirsoft]

Gogogo

[@rwslayer3607]

@@4UADSmartAirsoft Shit man. I was there this morning but didn’t get GBB one for myself lol

[@GuardianLords]

Do a test against; maple leaf, modify flat hop, and an elvishtac r-hop

[@4UADSmartAirsoft]

Nah we won't. We will test our bucking for sure, but we can't test the other buckings since we are already in a game, this makes it unfair in some ways

[@Zonatapio]

​@@4UADSmartAirsoft Not sure what "can't because we are already in the game" means exactly. Seems multiple comments responding to people asking for a side by side test if competition and your replies were confusing for both. Not trying to be rude, just genuinely curious why exactly you wouldn't compare to the competition. That's marketing 101

[@stevotype684]

@@Zonatapiocus they want to be objective and there is conflict of interest. Their goal is not marketing.

[@airsoft_kbuk]

TM MWS HopUp Unit compatible?

[@4UADSmartAirsoft]

Yep

[@airsoft_kbuk]

@@4UADSmartAirsoft Perfect, i will order :-D

[@workhardplayharder4924]

So Apple. Ha ha ha😂😂😂😂😂 Are you really airsoft company? ❤❤❤ Give it to meee......❤❤❤

[@4UADSmartAirsoft]

Yes we do it the apple way

[@rosszpenz]

What's that pistol right next to the white box in the middle (not the Glocks) at 0:25?

[@4UADSmartAirsoft]

It’s a Russian pistol kw15k

[@rosszpenz]

@@4UADSmartAirsoft thank you!

[@小陳-x7n]

怎麼個創新發?有點 心動

[@4UADSmartAirsoft]

買來試試就知道

[@robsorgdrager8477]

Please tell me these are available in the states🥺

[@4UADSmartAirsoft]

It will be on evike

[@robsorgdrager8477]

@@4UADSmartAirsoft I will be upgrading a few of my toys soon then. ✌️

[@woody7948]

what's the unit price looking like?

[@4UADSmartAirsoft]

300ntd

[@YIUYIUCHU173]

just for marui's only?

[@4UADSmartAirsoft]

When it’s for Marui it’s literally for everything

[@IFVBarmunk]

is it workoing on -20С?

[@4UADSmartAirsoft]

To be honest we don’t know

[@cheunghokyin]

Hi capa 可以用嗎

[@4UADSmartAirsoft]

不能用我們不賣

[@microwavablefish]

Is there different degrees for hardness for it? I run a GBLS and am not sure if the system would tear apart this bucking

[@4UADSmartAirsoft]

That is the only gun we didn’t test wish we get one to test with

[@microwavablefish]

@@4UADSmartAirsoft i can do it for you guys ;)

[@zhanchen6408]

哪里买

[@4UADSmartAirsoft]

之後就好找了

[@chichiboypumpi]

do you guys do custom builds? If I have the money I won't mind the shipping.

[@4UADSmartAirsoft]

Shipping guns into Taiwan is a realllllllll pain in the ass. Takes tooo much work to go through the government

[@chichiboypumpi]

@@4UADSmartAirsoft pain in the a, because of the many a-holes like in my country

[@bogdan192]

Aaaand it's sold out.

[@Live1509]

TBH this bucking looks like a clone of the Psionic Tho-R 🤔

[@4UADSmartAirsoft]

Haha nah it’s sooooooo different

[@Live1509]

@@4UADSmartAirsoft Well I'm curious to try it!

[@kwooook]

so whats the difference between this and a MR hop bucking?

[@Yankee2-2Nomad]

Exact same thing I was thinking. Im a big MR HOP guy, I dont see much difference here on initial view

[@4UADSmartAirsoft]

It’s a single contact and I have to say MR hop is a great bucking

[@bbq4373]

GJ

[@4UADSmartAirsoft]

Thanks man

[@Toni.Sky_R32Gtr]

Can i bye This in Germany ?

[@4UADSmartAirsoft]

Yes

[@Toni.Sky_R32Gtr]

⁠@@4UADSmartAirsoft who is the shop for this Hop up in Germany?

[@bill6385]

請問是橡膠材質還是矽膠？一段時間沒打后的前幾槍hop皮是不是也需要熱皮（暖槍）呢？

[@J1m._.]

平常在玩看彈道真的很不爽，想問一下哪一牌的皮比較不用熱槍？

[@bill6385]

@@J1m._. 我目前試過,矽膠材質的幾乎不需要熱搶

[@J1m._.]

@@bill6385 好，感謝

[@pewtube6000]

@@bill6385almost?..

[@laszloklar4597]

🇭🇺Nekem nem vált be minden 2 lövés 40cm el megy 30-40m

[@Roguefoo27]

I’ll take 2 for gbbrs

[@4UADSmartAirsoft]

Let’s go!

[@randoff9136]

is it better than promethues? someone test please

[@hoecage8781]

prommy was never good relative to stuff like mr hop and begadi so yes this is better

[@randoff9136]

@@hoecage8781 what is this guy talking about

[@PhantomM16]

Shut up and take my money!

[@4UADSmartAirsoft]

Will do!!

[@Zhou_josh97]

＠＠買不了啊

[@snake.airsoft09]

😳😳😳😳😳😳🥵🥵🥵🥵🥵

[@__Ratel_]

Is it also suitable for 0.2g BBB? Some Taiwan-developed rubber raises 0.2g BB too much.

[@MegaChickenPunch]

Why do you even want to raise bbs that are good like up to 15 meters

[@Live1509]

Who the hell is still using 0.2 bbs? They're useless!

[@4UADSmartAirsoft]

This one will work!

[@노랑이아빠]

I would like to know how this hop up rubber performs with 0.2g bb.

[@botodin6979]

Bruh

[@4UADSmartAirsoft]

It performs not bad lol