2.7.2 Packet Tracer - Configure Single-Area OSPFv2 - Physical Mode

  Рет қаралды 21,965

Christian Augusto Romero Goyzueta

Christian Augusto Romero Goyzueta

Күн бұрын

Пікірлер: 51
@marc4metal
@marc4metal 4 ай бұрын
I have a problem, maybe a bug, I did all steps and I got 100% of practice, but when I want to check metric from R1 didn't change, stays at [110/2] like before, when it's supposed to be [110/11] , I cant find what's the problem, pings working OK, routes are OK, the unique thing is the metric route from R1, maybe a bug of my file? or maybe a problem of version of PT? I am using the last one actually, 8.2.2.0400
@romeroc24
@romeroc24 3 ай бұрын
Please apply auto cost reference bandwidth on all routers, then clear ip ospf process on all routers, so this will work fine
@marc4metal
@marc4metal 3 ай бұрын
I already did that, It was one of the instructions on that practice... But not changed, tried do the practice couple times more with the same result :(
@romeroc24
@romeroc24 3 ай бұрын
@@marc4metal did you reloaded the routers?
@marc4metal
@marc4metal 3 ай бұрын
@@romeroc24 nope, but I cleared all OSPF proceses, like activity said.. Will try, thank you!
@marc4metal
@marc4metal 3 ай бұрын
@@romeroc24 yes, just did it now, sorry for the late response, same results..
@norn2511
@norn2511 Жыл бұрын
after configuring the R1 and switching to R2 the terminal suddenly says, Unauthorized Access is Prohibited!
@romeroc24
@romeroc24 Жыл бұрын
that is the banner, just press enter and continue
@G-H-0-S-T007
@G-H-0-S-T007 Жыл бұрын
Thank you Sir for all this effort, and all the explanations honestly you push me forward to keep studying and taking notes
@romeroc24
@romeroc24 Жыл бұрын
You are very welcome. Thank you for all your kind support
@Niggro07
@Niggro07 2 жыл бұрын
This is a great packet-tracer walkthrough!! Excellent explanations
@romeroc24
@romeroc24 2 жыл бұрын
Glad you enjoyed it! I appreciate it
@LaRudy
@LaRudy Жыл бұрын
hey everytime i set the secret password it does not let me into vty it says bad secret
@romeroc24
@romeroc24 Жыл бұрын
That means the password is not correct, or is not set, so you can configure and remember that password
@UllrGamingGod
@UllrGamingGod 3 ай бұрын
im a year too late but the secret password for enable is going to be class, not cisco
@OctaSeed
@OctaSeed Жыл бұрын
my R1# in the terminal turned into an R1>, what happened?
@OctaSeed
@OctaSeed Жыл бұрын
now it's asking for a password, but I can't write anything other than pressing enter
@romeroc24
@romeroc24 Жыл бұрын
@@OctaSeed use the enable password, letter will not be shown for security
@ashmeen6705
@ashmeen6705 11 ай бұрын
What is the password for R2 …. I’m entering cisco but it’s saying bad secrets
@28maak
@28maak 11 ай бұрын
this is happening for me also @@ashmeen6705
@mightymouse5830
@mightymouse5830 7 ай бұрын
I am in this course now and ran into same issue where R1> would come up and then when putting in en it would ask for a password for those wondering that password is class. That will get you into the R1#.
@dinman68
@dinman68 Жыл бұрын
Hello again Christian, well you wont remember me, but while I was in college from 2020-2022 I watched your videos to help me with all these labs. At that time when something didn't work out I would ask you a question and you being so good at this you would respond back to help me figure the problem out. Things happened and I didn't do anything in this field as of yet. So I have decided to get back on here and practice all the labs while I wait. This includes practicing with Hyper-V and Packet Tracer. I was wondering, you usually have a link to the word document so we can save that on our computer, but the link you have here goes directly into what I'm guessing is your packet tracer. Would it be possible to get a link for the word doc. so I/we could save that one too. I was able to save labs 1.1.7 & 1.6.2, but cant with this one. Either way thanks again for taking up so much of your time with these labs. It really does help.
@romeroc24
@romeroc24 Жыл бұрын
Thank you for all your support my friend, I appreciate it. In this case, this is a packet tracer activity, so the instructions are in the packet tracer file, and it is not necessary a .docx file.
@dinman68
@dinman68 Жыл бұрын
@@romeroc24 hey that’s cool. It’s so cool to have these videos to go back too. Thank you again!!
@romeroc24
@romeroc24 Жыл бұрын
@@dinman68 thanks to you
@dinman68
@dinman68 Жыл бұрын
@@romeroc24 I just noticed that 2.2.7 is done with an updated packet tracer. I can’t believe I was able to upgrade since I’ve been out of school for 2 years now. So now I’ll have to start doing the new labs on the updated PT I also can’t believe you are still doing these videos. Man you are awesome!!!
@romeroc24
@romeroc24 Жыл бұрын
@@dinman68 Thank you my friend!! I'll be here for any questions, happy to help
@miguelangelsolisarias8361
@miguelangelsolisarias8361 Жыл бұрын
Good video bro just one detail your camera is fine little brother xd❤
@romeroc24
@romeroc24 Жыл бұрын
ok, la agrandaré, saludos!!!
@miguelangelsolisarias8361
@miguelangelsolisarias8361 Жыл бұрын
Saludos bro
@kimbaldwingarcia4867
@kimbaldwingarcia4867 Жыл бұрын
can i have the PKT file? tysm!!😁
@romeroc24
@romeroc24 Жыл бұрын
The .pka file is shared on the video's description
@ocloman8019
@ocloman8019 3 жыл бұрын
Thank you so much my friend
@romeroc24
@romeroc24 3 жыл бұрын
Thank you for all your support, I appreciate it
@mustafaamahamed1773
@mustafaamahamed1773 3 жыл бұрын
Thank you
@romeroc24
@romeroc24 3 жыл бұрын
@@mustafaamahamed1773 thanks to you
@dwainmacalua6248
@dwainmacalua6248 Жыл бұрын
Can you send me a link for completed task please?
@romeroc24
@romeroc24 Жыл бұрын
I don't have the completed file, but you can use the video to complete your own file
@cengizhiso6460
@cengizhiso6460 2 жыл бұрын
Thanks for this amazing explanation, I have a problem with connecting between S1 and S2, i got error from both, the error is; (Bad file number) can u coming with some advice?
@romeroc24
@romeroc24 2 жыл бұрын
Glad it helped. Please use the complete format or syntax when you configure the devices, please view the video at detail again
@ayyunarulita
@ayyunarulita 3 ай бұрын
makasih bang. you're genius
@romeroc24
@romeroc24 3 ай бұрын
Thank you for all your support, thanks again
@NDAGaming
@NDAGaming 2 жыл бұрын
you can write do wr to save the running config to the startup config :D
@romeroc24
@romeroc24 2 жыл бұрын
that is right
@prasannasiriwardana7703
@prasannasiriwardana7703 Жыл бұрын
valuble....thank you very much..
@romeroc24
@romeroc24 Жыл бұрын
You're most welcome
@MiVentanaVirtualTI
@MiVentanaVirtualTI 3 жыл бұрын
thank you
@romeroc24
@romeroc24 3 жыл бұрын
You're welcome
2.7.3 Packet Tracer - Multiarea OSPF Exploration - Physical Mode (Part 1)
27:14
Christian Augusto Romero Goyzueta
Рет қаралды 10 М.
2.7.1 Packet Tracer - Single-Area OSPFv2 Configuration
28:31
Tech Acad
Рет қаралды 63 М.
Vampire SUCKS Human Energy 🧛🏻‍♂️🪫 (ft. @StevenHe )
0:34
Alan Chikin Chow
Рет қаралды 138 МЛН
What Will Really Make You A Programmer
11:46
Fazt
Рет қаралды 10 М.
10.8.1 Packet Tracer - Configure CDP, LLDP, and NTP
16:29
Christian Augusto Romero Goyzueta
Рет қаралды 13 М.
5.5.2 Packet Tracer - Configure and Verify Extended IPv4 ACLs - Physical Mode
1:05:35
Christian Augusto Romero Goyzueta
Рет қаралды 22 М.
2.7.1 Packet Tracer - Single-Area OSPFv2 Configuration
35:26
Christian Augusto Romero Goyzueta
Рет қаралды 14 М.
3.4.6 Packet Tracer - Configure VLANs and Trunking - Physical Mode
50:21
Christian Augusto Romero Goyzueta
Рет қаралды 44 М.
2.6.6 Packet Tracer - Verify Single-Area OSPFv2
26:49
Tech Acad
Рет қаралды 18 М.
2.6.6 Packet Tracer - Verify Single-Area OSPFv2
22:29
Christian Augusto Romero Goyzueta
Рет қаралды 6 М.
13.5.2 Packet Tracer - Wireless Technology Exploration - Physical Mode
43:45
Christian Augusto Romero Goyzueta
Рет қаралды 13 М.